Search NASA⌕ Search

Engineering topics

Wang, Deli

Publications and source records attributed to Wang, Deli.

At least 19 records

Structurally ordered nanoparticles, methods and applications

Embodiments provide a nanoparticle and a method for preparing the nanoparticle, as well as a membrane that includes the nanoparticle and a fuel cell that includes the membrane. The method comprises a thermal treatment method that provides from a nanoparticle comprising a structurally disordered material the nanoparticle comprising: (1) a structurally ordered core comprising a first material; and (2) a shell surrounding and further structurally aligned with the structurally ordered core and comprising a second material different from the first material. Particularly desirable is a nanoparticle comprising a Pt3Co@Pt/C structurally ordered core-shell composition supported upon a carbon support.

Abruna, Hector D.↗

Carbon material supported hollow metal oxide nanoparticles, methods and applications

A method for preparing a material composition comprising a hollow transition metal oxide nanoparticle supported upon a carbon material support includes a solution impregnation process step, followed by a thermal reduction process step and finally a thermal oxidation process step. The material composition, an electrode and an electrical component such as but not limited to a battery are all predicated at least in-part upon the material composition prepared in accord with the foregoing method. The foregoing material composition, electrode, battery and method may ultimately provide a LIB with enhanced performance.

Yu, Yingchao↗

Biaxial Strains Mediated Oxygen Reduction Electrocatalysis on Fenton Reaction Resistant L1 0 ‐PtZn Fuel Cell Cathode

Abstract PtM alloy catalysts (e.g., PtFe, PtCo), especially in an intermetallic L1 0 structure, have attracted considerable interest due to their respectable activity and stability for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, metal‐catalyzed formation of ·OH from H 2 O 2 (i.e., Fenton reaction) by Fe‐ or Co‐containing catalysts causes severe degradation of PEM/catalyst layers, hindering the prospects of commercial applications. Zinc is known as an antioxidant in Fenton reaction, but is rarely alloyed with Pt owing to its relatively negative redox potential. Here, sub‐4 nm intermetallic L1 0 ‐PtZn nanoparticles (NPs) are synthesized as high‐performance PEMFC cathode catalysts. In PEMFC tests, the L1 0 ‐PtZn cathode achieves outstanding activity (0.52 A mg Pt −1 at 0.9 V iR ‐free , and peak power density of 2.00 W cm −2 ) and stability (only 16.6% loss in mass activity after 30 000 voltage cycles), exceeding the U.S. DOE 2020 targets and most of the reported ORR catalysts. Density function theory calculations reveal that biaxial strains developed upon the disorder‐order (A1L1 0 ) transition of PtZn NPs would modulate the surface PtPt distances and optimize PtO binding for ORR activity enhancement, while the increased vacancy formation energy of Zn atoms in an ordered structure accounts for the improved stability.

Liang, Jiashun↗

Electronic structure and oxophilicity optimization of mono-layer Pt for efficient electrocatalysis

The slow kinetics of the anodic hydrogen oxidation reaction (HOR) in alkaline medium is one of the limitations for anion exchange membrane fuel cells (AEMFCs). Hence, accurately regulate and understand catalytic interface structure are essential to solve this bottleneck and reveal the structure-activity relationship. In this work, a novel trimetal core-shell model with mono-layer Pt-shell is employed for hydrogen electrooxidation to avoid thermodynamic driven bulk/surface composition deviation. On account of the atomic radius discrepancies of 3d-transition metals M (M = Fe, Co and Cu), the electronic structure of mono-layer Pt is regulated by the strain-engineered Pd-M core and the electrocatalytic activity for HOR is tuned accordingly. Nevertheless, step-by-step electrochemical monitoring and surface-treatment experiments indicate that the oxophilicity optimization by low-valence M(OH) x species, rather than the hydrogen binding energy (HBE) optimization caused by strain engineering, influence the activity obviously. It is mainly derived from the enhanced adsorption of OH ad and accelerated desorption of the H ad . The trimetal core-shell model breathes new life into the low-Pt catalyst design for hydrogen electrooxidation reaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optimizing PtFe intermetallics for oxygen reduction reaction: from DFT screening to in situ XAFS characterization

Rational designing of catalysts to promote the sluggish kinetics of the cathode oxygen reduction reaction in proton exchange membrane fuel cells is still challenging, yet of crucial importance to its commercial application. Here, on the basis of theoretical DFT calculations which suggest that order structured fct-phased PtFe (O-PtFe) with an atomic Pt shell exhibits superior electrocatalytic performance towards the ORR, the desired structure was prepared by using a scalable impregnation–reduction method. The as-prepared O-PtFe delivered enhanced activity (0.68 A mg -1 Pt ) and stability (73% activity retention after 10 000 potential cycles) compared with the corresponding disordered PtFe alloy (D-PtFe) and Pt. To confirm the excellent durability, in situ X-ray absorption fine structure spectroscopy was conducted to probe the local and electronic structure changes of O-PtFe during 10 000 cycle accelerated durability testing. In conclusion, we hope that this facile synthesis method and the in situ XAFS experiment could be readily adapted to other catalyst systems, facilitating the screening of highly efficient ORR catalysts for fuel cell application.

36 MATERIALS SCIENCE↗

One-Nanometer-Thick Pt 3 Ni Bimetallic Alloy Nanowires Advanced Oxygen Reduction Reaction: Integrating Multiple Advantages into One Catalyst

Developing highly active as well as durable oxygen reduction reaction (ORR) electrocatalysts are still imperative for clean and efficient energy conversion device, such as fuel cells and metal-air battery. For this purpose and maximize the utilization of noble Pt, we present here a facile, yet scalable strategy for the high-precise synthesis of 1-nm-thick Pt 3 Ni bimetallic alloy nanowires (Pt 3 Ni BANWs). The seed-mediated growth mechanism of Pt 3 Ni BANWs was identified subsequently. As expected, the Pt 3 Ni BANWs delivered enhanced mass activity (0.546 A mgPt –1 , exceeding the 2020 target of DOE) in comparison to Pt nanowires assembly (Pt NWA, 0.098 A mgPt –1 ) and Pt/C (Pt, 0.135 A mgPt –1 ), because of the rational integration of multiple compositional and structural advantages. Moreover, the Pt 3 Ni BANWs displayed enhanced durability (37% MA retention) than Pt NWA and Pt after 50 000 potential cycles. All these results indicate that the ultrathin Pt 3 Ni BANWs are potential candidates for catalyzing ORR with acceptable activity and durability. In conclusion, the present work could not only provide a facile strategy but also a general guidance for the design of superb performance Pt-based nanowire catalysts for ORR.

25 ENERGY STORAGE↗

Atomic rearrangement from disordered to ordered Pd-Fe nanocatalysts with trace amount of Pt decoration for efficient electrocatalysis

The structure-activity relationship between the ORR performance and the surface electronic structure of Pd is constructed and the ORR performance are rationally modified via the structural transition from disordered face centered cubic phase (fcc, D-PdFe/C) to ordered intermetallic tetragonal phase (fct, O-PdFe/C). When the small amount of Pt atoms decorated on O-PdFe/C surface forming O-PdFe@Pt/C core-shell structure, the sublayer of Pd and Fe atoms may cause the lattice contraction of surface Pt and then weak the bonding energy on O-PdFe@Pt/C catalyst relative to bulk Pt/C, which is further illustrated by density functional theory (DFT) calculation. The weakened oxygen affinity results in the enhancement of ORR performance on O-PdFe@Pt/C. Here, for a practical application, the well-constructed O-PdFe@Pt/C exhibits higher voltage and peak power density than D-PdFe@Pt/C and Pt/C when applied as the air-breathing cathode material in Zn-air battery.

25 ENERGY STORAGE↗

Carbon material supported hollow metal oxide nanoparticles, methods and applications

A method for preparing a material composition comprising a hollow transition metal oxide nanoparticle supported upon a carbon material support includes a solution impregnation process step, followed by a thermal reduction process step and finally a thermal oxidation process step. The material composition, an electrode and an electrical component such as but not limited to a battery are all predicated at least in-part upon the material composition prepared in accord with the foregoing method. The foregoing material composition, electrode, battery and method may ultimately provide a LIB with enhanced performance.

36 MATERIALS SCIENCE↗

Controllable construction of flower-like FeS/Fe 2 O 3 composite for lithium storage

Transitions metal sulfides/oxides have been considered as promising anode candidates for next generation lithium-ion batteries (LIBs) due to high theoretical capacities. However, the large volume change during lithiation/delithiation process and poor electronic conductivity often result in a poor charging/discharging performance. Herein, we design a flower-like FeS/Fe 2 O 3 composite via a simple “solvothermal-oxidation” method, in which the Fe 2 O 3 is most distributed on the surface of the flower. The unique porous structure and synergistic effect between FeS and Fe 2 O 3 not only accommodate the large volume expansion, but also facilitate Li ion and electron transport. The Fe 2 O 3 shell effectively reduce the dissolution of Li2Sx during discharge/charge process. When serving as the anode material in lithium ion battery, FeS/Fe 2 O 3 exhibits superior specific capacity, rate capacity and cycling stability compared with pure FeS and Fe 2 O 3 .

36 MATERIALS SCIENCE↗

Tuning the electrocatalytic activity of Pt by structurally ordered PdFe/C for the hydrogen oxidation reaction in alkaline media

Tuning the hydrogen adsorption energy (E H ) by controlling the surface electronic structure of Pt is essential for enhancing the hydrogen oxidation reaction (HOR) performance in alkaline media. This could be achieved by forming a Pt skin on PdFe/C nanoparticles with structurally ordered intermetallic (O-PdFe@Pt/C) or disordered alloy (D-PdFe@Pt/C). The HOR activity on O-PdFe@Pt/C exhibits an exchange current density of 1.49 A mg Pt -1 , which is 3.87 and 7.56 times higher than that on D-PdFe@Pt/C (0.385 A mg Pt -1 ) and Pt/C (0.197 A mg Pt -1 ), respectively. The excellent electrocatalytic HOR performance on O-PdFe@Pt/C can be ascribed to the attenuation of E H on the Pt shell induced by the structurally ordered PdFe core, where the E H on O-PdFe@Pt surface is 0.18 eV smaller than that on Pt according to DFT calculations.

36 MATERIALS SCIENCE↗

Heteroatom (P, B, or S) incorporated NiFe-based nanocubes as efficient electrocatalysts for the oxygen evolution reaction

Exploring low-cost and highly efficient electrocatalysts toward the oxygen evolution reaction (OER) is of significant importance, although facing great challenges for sustainable energy systems. In this study, amorphous NiFe-based porous nanocubes (Ni–Fe–O–P, Ni–Fe–O–B, and Ni–Fe–O–S) are successfully synthesized via simple and cost-effective one-step calcination of Ni–Fe based metal–organic frameworks (MOFs) and heteroatom containing molecules. The resulting three materials maintain a well-defined porous nanocube morphology with heteroatoms uniformly distributed in the structure. The unique porous structure can effectively provide more active sites and shorten the mass transport distance. Additionally, the introduction of P, B or S can tune the electronic structure, which is favorable for accelerating the charge transfer, and may lead to the formation of the higher average oxidative valence of Ni species during the OER process. Benefiting from the above desirable properties, all three materials exhibit excellent OER electrocatalytic activities and outstanding long-term stability in a home-made zinc air battery. Lastly, this work not only provides a general approach for the synthesis of highly efficient electrocatalysts based on earth-abundant elements but also highlights the potential prospects of MOFs in energy conversion and storage devices.

36 MATERIALS SCIENCE↗

Recent Advances of Structurally Ordered Intermetallic Nanoparticles for Electrocatalysis

Structurally ordered intermetallic phases have exhibited higher and higher electrocatalytic activity and stability than disordered alloys in reactions such as the oxygen reduction reaction (ORR) and the catalytic oxidation of fuels (hydrogen, formic acid, or ethanol). The enhanced electrocatalytic activity could be derived from the definite composition and predictable control over structural, geometric, and electronic effects. This review, based on the understanding of the catalytic mechanism of structurally ordered intermetallic nanoparticles, provides a comprehensive acknowledgement of how the particle size and morphology affect the catalytic performance. The strategy for reducing particle size and the impact of particle size on electrocatalysis will be firstly introduced. Then, recent developments in the synthesis and design of morphology-controlled catalysts are summarized. The structure-activity relationship between the catalytic activity and morphology including core-shell/hollow and porosity will be highlighted. Finally, the current challenges and future developments are provided. On the basis of this review, intermetallic compound shed light on the future development of electrocatalysts for fuel cells and metal-air batteries.

36 MATERIALS SCIENCE↗

Effects of crystal phase and composition on structurally ordered Pt–Co–Ni/C ternary intermetallic electrocatalysts for the formic acid oxidation reaction

In this paper, to enhance the electrocatalytic performance of the formic acid oxidation reaction (FAOR), structurally ordered face-centered tetragonal (fct) Pt–Co–Ni/C intermetallic nanoparticles were synthesized via an impregnation reduction method, followed by post heat-treatment. It was found that an ordered intermetallic PtCo phase prevails rather than PtNi as the principal part for the ternary Pt–Co–Ni alloy after being annealed at high temperature, namely, Ni atoms merely serve as the substitute for Co in the lattice of Pt–Co–Ni intermetallics possessing the same atomic stack as PtCo intermetallics. In addition, there is a limitation for Ni to replace Co for the intermetallic PtCo phase, otherwise, most likely excessive Ni would replace the Pt atoms and damage the atomically ordered structure. Benefiting from the ordered structural features and rational introduction of the third transition metal to modify the distance between Pt and Pt atoms, the Pt–Co–Ni/C ordered intermetallic nanoparticles exhibit an enhancement in catalytic activity for the FAOR compared with Pt/C, the PtNi/C alloy and ordered intermetallic PtCo/C nanoparticles. Furthermore, the presence of Ni in the ordered intermetallic Pt–Co–Ni/C catalyst leads to a noticeable improvement in durability compared with the ordered intermetallic PtCo/C catalyst. Finally, the present work reveals opportunities for the rational design of ternary electrocatalysts with enhanced catalytic performance for fuel cell applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Porous Structured Ni–Fe–P Nanocubes Derived from a Prussian Blue Analogue as an Electrocatalyst for Efficient Overall Water Splitting

Exploring nonprecious metal electrocatalysts to replace the noble metal-based catalysts for full water electrocatalysis is still an ongoing challenge. In this work, porous structured ternary nickel–iron–phosphide (Ni–Fe–P) nanocubes were synthesized through one-step phosphidation of a Ni–Fe-based Prussian blue analogue. The Ni–Fe–P nanocubes exhibit a rough and loose porous structure on their surface under suitable phosphating temperature, which is favorable for the mass transfer and oxygen diffusion during the electrocatalysis process. As a result, Ni–Fe–P obtained at 350 °C with poorer crystallinity offers more unsaturated atoms as active sites to expedite the absorption of reactants. Additionally, the introduction of nickel improved the electronic structure and then reduced the charge-transfer resistance, which would result in a faster electron transport and an enhancement of the intrinsic electrocatalytic activities. Benefiting from the unique porous nanocubes and the chemical composition, the Ni–Fe–P nanocubes exhibit excellent hydrogen evolution reaction and oxygen evolution reaction activities in alkaline medium, with low overpotentials of 182 and 271 mV for delivering a current density of 10 mA cm–2, respectively. Moreover, the Ni–Fe–P nanocubes show outstanding stability for sustained water splitting in the two-electrode alkaline electrolyzer. Furthermore, this work not only provides a facile approach for designing bifunctional electrocatalysts but also further extends the application of metal–organic frameworks in overall water splitting.

36 MATERIALS SCIENCE↗

High-rate and long-life lithium-ion battery performance of hierarchically hollow-structured NiCo 2 O 4 /CNT nanocomposite

In this paper, 3D-transition binary metal oxides have been considered as promising anode materials for lithium-ion batteries with improved reversible capacity, structural stability and electronic conductivity compared with single metal oxides. Here, carbon nanotube supported NiCo 2 O 4 nanoparticles (NiCo 2 O 4 /CNT) with 3D hierarchical hollow structure are fabricated via a simple one-pot method. The NiCo 2 O 4 nanoparticles with interconnected pores are consists of small nanocrystals. When used as anode material for the lithium-ion battery, NiCo 2 O 4 /CNT exhibits enhanced electrochemical performance than that of Co 3 O 4 /CNT and NiO/CNT. Moreover, ultra-high discharge/charge stability was obtained for 4000 cycles at a current density of 5 A g –1 . The superior battery performance of NiCo 2 O 4 nanoparticles is probably attributed to the special structural features and physical characteristics, including integrity, hollow structure with interconnected pores, which providing sufficient accommodation for the volume change during charge/discharge process. Besides, the consisting of ultra-small crystals enhanced the utility of active material, and intimate interaction with CNTs improved the electron-transfer rate.

36 MATERIALS SCIENCE↗

Optimizing the ORR activity of Pd based nanocatalysts by tuning their strain and particle size

Controlling of the particle size and surface strain is the key to tuning the surface chemistry and optimizing the catalytic performance of electrocatalysts. In this study, we show that by introducing both Fe and Co into Pd lattices, the surface strain of Pd nanocatalysts can be tuned to optimize their oxygen reduction activity in both fuel cells and Zn–air batteries. The Pd 2 FeCo/C alloy particles are uniquely coated with an ultrathin Fe 2 O 3 shell which is in situ formed during a thermal annealing treatment. The thin shell acts as an effective barrier that prevents the coalescence and ripening of Pd 2 FeCo/C nanoparticles. Compared with Pd/C, Pd 2 FeCo/C exhibits higher catalytic activity and long-term stability for the ORR, signifying changes in catalytic behavior due to particle sizes and strain effects. Moreover, by spontaneous decoration of Pt on the surface of Pd 2 FeCo/C, the Pd 2 FeCo@Pt/C core@shell structure was formed and the Pt mass activity was about 37.6 and 112.5 times higher than that on Pt/C in a 0.1 M HClO 4 and KOH solution at 0.9 V, respectively, suggesting an enhanced ORR performance after Pt decoration. More interestingly, Pd 2 FeCo@Pt/C also shows a power density of ~308 mW cm -2 , which is much higher than that of Pt/C (175 mW cm -2 ), and excellent durability in a home-made Zn–air battery.

25 ENERGY STORAGE↗