Search NASA⌕ Search

Engineering topics

Wang, Dezhi

Publications and source records attributed to Wang, Dezhi.

Proton irradiation effect on thermoelectric properties of nanostructured n-type half-Heusler Hf 0.25 Zr 0.75 NiSn 0.99 Sb 0.01

Here, thermoelectric properties of nanostructured half-Heusler Hf 0.25 Zr 0.75 NiSn 0.99 Sb 0.01 were characterized before and after 2.5 MeV proton irradiation. A unique high-sensitivity scanning thermal microprobe was used to simultaneously map the irradiation effect on thermal conductivity and Seebeck coefficient with spatial resolution less than 2 μm. The thermal conductivity profile along the depth from the irradiated surface reflects excellent agreement with the irradiation-induced damage profile from simulation. The Seebeck coefficient was unaffected while both electrical and thermal conductivities decreased by 24%, resulting in no change in thermoelectric figure of merit ZT. Reductions in thermal and electrical conductivities are attributed to irradiation-induced defects that act as scattering sources for phonons and charge carriers.

36 MATERIALS SCIENCE↗

Vertically Aligned MoS 2 /Mo 2 C hybrid Nanosheets Grown on Carbon Paper for Efficient Electrocatalytic Hydrogen Evolution

Maximizing and creating active sites has been a broad strategy to increase the performance of a catalyst. Because of the high electrocatalytic hydrogen evolution reactivity (HER) of ultrafine Mo 2 C nanocrystals and edges of two-dimensional MoS 2 , an electrode with a synergistic integration of these two nanomaterials is expected to show a better HER performance. In this work we report this hybrid nanostructure of vertically aligned MoS 2 /Mo 2 C nanosheets on conductive carbon paper. It was revealed that the original structure of MoS 2 nanosheets remains intact after the carburization, but the surfaces are incorporated with either Mo 2 C nanodomains or a heteroatomic mixture of S and C. The hybrid catalyst exhibits a much lower HER overpotential in comparison to those of the corresponding Mo 2 C and MoS 2 alone. Its high activity is congruent with DFT calculations, which show that multiple S and C coordinated Mo sites with near zero Gibbs free energy of hydrogen adsorption exist. Hence, the low overpotential of this binder-free hybrid catalyst is a result of active sites of Mo–S–C and highly dispersed Mo 2 C nanodomains on the original edges and basal planes of MoS 2 . Our prediction and realization of active HER sites with this hybrid two-dimensional nanostructure opens up a route toward the development of more active HER catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bifunctional metal phosphide FeMnP films from single source metal organic chemical vapor deposition for efficient overall water splitting

Developing stable and efficient bifunctional catalysts for overall water splitting into hydrogen and oxygen is a critical step in the realization of several clean-energy technologies. Here we report a robust and highly active electrocatalyst that is constructed by deposition of the ternary metal phosphide FeMnP onto graphene-protected nickel foam by metal-organic chemical vapor deposition from a single source precursor. FeMnP exhibits high electrocatalytic activity toward both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Utilizing FeMnP/GNF as both the anode and the cathode for overall water splitting, a current density of 10 mA cm -2 is achieved at a cell voltage of as low as 1.55 V with excellent stability. Complementary density functional theory (DFT) calculations suggest that facets exposing both Fe and Mn sites are necessary to achieve high HER activity. The present work provides a facile strategy for fabricating highly efficient electrocatalysts from earth-abundant materials for overall water splitting.

36 MATERIALS SCIENCE↗

Stronger phonon scattering by larger differences in atomic mass and size in p-type half-Heuslers Hf 1-x Ti x CoSb 0.8 Sn 0.2

We report that high lattice thermal conductivity has been the bottleneck for further improvement of the thermoelectric figure-of-merit (ZT) of half-Heuslers (HHs) Hf 1-x Zr x CoSb 0.8 Sn 0.2 . Theoretically, the lattice thermal conductivity can be reduced by exploring larger differences in the atomic mass and size in the crystal structure, leading to higher ZT. In this paper, we experimentally demonstrated that a lower thermal conductivity in p-type half-Heuslers can be achieved when Ti is used to replace Zr, i.e., Hf 1-x Ti x CoSb 0.8 Sn 0.2 , due to larger differences in the atomic mass and size between Hf and Ti compared with Hf and Zr. Finally, the highest ZT peak, ~1.0 at 800 °C, in the Hf 1-x Ti x CoSb 0.8 Sn 0.2 (x = 0.1, 0.2, 0.3, and 0.5) system was achieved using Hf 0.8 Ti 0.2 CoSb 0.8 Sn 0.2 , which makes this material useful in power generation applications.

36 MATERIALS SCIENCE↗

Suppression of grain growth by additive in nanostructured p-type bismuth antimony tellurides

Grain growth is a major issue in the preparation of nanostructured bismuth-antimony-tellurides during hot pressing the nanopowders into dense bulk samples. To prevent grain agglomeration during ball milling and growth during hot pressing, organic agent (Oleic Acid, OA) as additive was added here into the materials at the beginning of the ball milling process. With different concentrations of OA (0.5, 1.0, 1.5, 2.0, and 2.5 wt%), grains with different sizes are obtained. Structural analysis clearly shows that it is the particle size of the nanopowders that determines the final grain size in the densely compacted bulk samples. A combination of small grains ~200–500 nm and nanopores leads to effective phonon scattering, which results in the decrease of lattice thermal conductivity, and ZT of ~1.3 at 373 K for the sample with 2.0 wt% OA.

36 MATERIALS SCIENCE↗

Coated carbon nanotube array electrodes

The present invention provides conductive carbon nanotube (CNT) electrode materials comprising aligned CNT substrates coated with an electrically conducting polymer, and the fabrication of electrodes for use in high performance electrical energy storage devices. In particular, the present invention provides conductive CNTs electrode material whose electrical properties render them especially suitable for use in high efficiency rechargeable batteries. The present invention also provides methods for obtaining surface modified conductive CNT electrode materials comprising an array of individual linear, aligned CNTs having a uniform surface coating of an electrically conductive polymer such as polypyrrole, and their use in electrical energy storage devices.

36 MATERIALS SCIENCE↗