Search NASA⌕ Search

Engineering topics

Wang, He

Publications and source records attributed to Wang, He.

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unraveling the Combined Photothermal Stability of Common Perovskite Solar Cell Compositions

In halide perovskite solar cells, certain compositions, especially those with a high mixture of anions, degrade rapidly. Here, in this study, a degradation study compares the photo (exposure to light), thermal (exposure to elevated temperatures), and photo-plus-thermal (combination) stability of three representative perovskite compositions chosen for their relatively high performance and to independently test anion versus cation effects. Based upon experience and reports, the compositions studied are triple cation with a high Br ratio (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.5 Br 0.5 ) 3 ), all iodide with a moderately high Cs ratio (FA 0.8 Cs 0.2 PbI 3 ), and FA-dominated triple cation (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 ). Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 displayed the best combined photo-plus-thermal stability. Degradation mechanisms were investigated by comparing the morphology, surface composition, and bulk and interface carrier dynamics. Under the harshest aging conditions (photo-plus-thermal), phase segregation and vaporization of organic cations occurred, along with the appearance of high-energy states indicating the interaction with C 60 . The findings were verified on perovskite films blade-coated in air used in devices (FTO/NiOx/SAM/Perovskite/C 60 /BCP/Cu), achieving an efficiency of 21.9% alongside correlated stability.

14 SOLAR ENERGY↗
DOE OSTI2024

Electrochemical and Optical Spectroscopic Probing of Transition–Sized Au 130 (SR) 50 Nanoclusters

Ultrasmall metal nanoclusters (NCs) exhibit a quantized conduction band, hence, a distinct HOMO-LUMO gap (E g ). Such a quantized electronic structure gives rise to multiple discrete peaks in the optical absorption spectrum of the NCs. As the size grows to 130 gold atoms (Au 130 protected by ligands), electrical charging and optical behaviors seem to show certain metal-like features (hence, transition-sizes). To probe such behaviors, especially the potential ligand effect, we have devised the synthesis of Au 130 NCs protected by phenylethanethiolate and naphthalenethiolate, respectively, with the former having a nonconjugated separation between the aromatic molecular group and the metal core while the latter being in direct bonding. A careful comparison of these two Au 130 nanoclusters with the earlier reported analogues is carried out, including the structurally characterized Au 130 (pMBT) 50 and the aqueous counterpart. While all of these nanoclusters possess the same 80 free electron counts in the core, some notable differences in electrochemical and optical properties are found, which are attributed to the ligand effects. The obtained insights may stimulate further interest in the transition-sized nanoclusters and also promote their applications in optics, energy conversion, and biomedicine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Emergent superconductivity in topological-kagome-magnet/metal heterostructures

Itinerant kagome lattice magnets exhibit many novel correlated and topological quantum electronic states with broken time-reversal symmetry. Superconductivity, however, has not been observed in this class of materials, presenting a roadblock in a promising path toward topological superconductivity. Here, we report that novel superconductivity can emerge at the interface of kagome Chern magnet TbMn 6 Sn 6 and metal heterostructures when elemental metallic thin films are deposited on either the top (001) surface or the side surfaces. Superconductivity is also successfully induced and systematically studied by using various types of metallic tips on different TbMn 6 Sn 6 surfaces in point-contact measurements. The anisotropy of the superconducting upper critical field suggests that the emergent superconductivity is quasi-two-dimensional. Remarkably, the interface superconductor couples to the magnetic order of the kagome metal and exhibits a hysteretic magnetoresistance in the superconducting states. Taking into account the spin-orbit coupling, the observed interface superconductivity can be a surprising and more realistic realization of the p-wave topological superconductors theoretically proposed for two-dimensional semiconductors proximity-coupled to s-wave superconductors and insulating ferromagnets. Our findings of robust superconductivity in topological-Chern-magnet/metal heterostructures offer a new direction for investigating spin-triplet pairing and topological superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Efficient and stable perovskite solar cells based on blade-coated CH 3 NH 3 PbI 3 thin films fabricated using “green” solvents under ambient conditions

Metal halide perovskites are considered the most promising candidates for solar cells of the decade due to their exceptional optical and electronic properties. The power conversion efficiency of metal halide perovskites, when incorporated as the active layer of solar cells, has become comparable to that observed for conventional silicon solar cells. However, the stability, scaleup, green solvent usage, and fabrication in ambient conditions of metal halide perovskites need to be solved for commercial applications. Here, in this work, we report the fabrication of blade-coated methylammonium lead iodide (MAPbI 3 ) perovskite thin films using methylamine and acetonitrile as “green” solvents under ambient conditions. Our perovskite films are initially prepared from low purity PbI2 (99%) and are blade-coated in dry air at relative humidity (RH) levels above 30%. A significant advantage of fabricating our perovskite thin films via blade-coating protocols is that there is a minimal amount of precursors (5 μL) used compared to spin-coating methods (50μL–60μL) for a 4 cm 2 substrate. With the addition of a small amount of an organic halide salt, namely, phenethylammonium chloride, the film crystallinity is improved and non-radiative recombination is suppressed, resulting in power conversion efficiencies over 20%. In addition, the device maintains more than 95% of its initial efficiency after 500 h under continuous light illumination of 1-sun at open circuit conditions, 50 °C and 60% RH. The above method leads a path towards the commercial fabrication of perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Blade Coating Inverted Perovskite Solar Cells with Vacuum-Assisted Nucleation Based on Bottom Quasi-2D Passivation

Metal halide perovskite solar cells (PSCs) attract an enormous attention because of their high power conversion efficiency (PCE) and low fabrication cost. However, their commercialization is limited by fabricating highly efficient large-area solar cells. Controlling the morphology and crystallization of perovskite for large-area fabrication is difficult but important. Here, in this work, a vacuum-assisted approach is developed to obtain mirror-like, pinhole-free, highly crystalline, and uniform blade-coated perovskite films, without the use of antisolvent and air knife. This method can be a universal approach for various perovskite compositions. Meanwhile, the phenethylammonium iodide passivation effect at the top and bottom interfaces of perovskite layer based on FTO/NiO x /perovskite/C 60 /BCP/Cu inverted p-i-n structure is systematically investigated. The optimized device fabricated by blade coating under an ambient environment exhibits the champion PCE of 20.7% and is among the top few records of blade coating inverted structure based on NiOx hole transport layer. The encapsulated device retains 97% of its maximum efficiency under open-circuit condition after 1000 h of photostability test in an ambient environment at room temperature with a relative humidity of 40–60%. Herein, low-cost, easy, and reproducible strategies to fabricate efficient and stable blade-coated PSCs are demonstrated.

14 SOLAR ENERGY↗
DOE OSTI2021

Full Vorticity Budget of the Arabian Sea from a 0.1° Ocean Model: Sverdrup Dynamics, Rossby Waves, and Nonlinear Eddy Effects

Abstract The Arabian Sea, influenced by the Indian monsoon, has many unique features, including its basin-scale seasonally reversing surface circulation and the Great Whirl, a seasonal anticyclonic system appearing during the southwest monsoon close to the western boundary. To establish a comprehensive dynamical picture of the Arabian Sea, we utilize numerical model output and design a full vorticity budget that includes a fully decomposed nonlinear term. The ocean general circulation model has 0.1° resolution and is mesoscale eddy-resolving in the region. In the western boundary current system, we highlight the role of nonlinear eddies in the life cycle of the Great Whirl. The nonlinear eddy term is of leading-order importance in this feature’s vorticity balance. Specifically, it contributes to the Great Whirl’s persistence in boreal fall after the weakening of the southwesterly winds. In the open ocean, Sverdrup dynamics and annual Rossby waves are found to dominate the vorticity balance; the latter is considered as a key factor in the formation of the Great Whirl and the seasonal reversal of the western boundary current. In addition, we discuss different forms of vertically integrated vorticity equations in the model and argue that the bottom pressure torque term can be interpreted analogously as friction in the western boundary and vortex stretching in the open ocean.

58 GEOSCIENCES↗
DOE OSTI2021

Generation of low–latitude seamount–trapped waves: a case study of the Seychelles Plateau

Baroclinic seamount-trapped waves are thought to influence their surrounding ecosystem; however, trapped waves are not well-studied in near-equatorial settings, where stratification is strong and Burger numbers are large. Motivated by observations, we use daily output (2005-2009) from the global 0.1-degree Parallel Ocean Program Model (POP) to examine topographically trapped baroclinic waves around the Seychelles Plateau (S > 400) in the tropical Indian Ocean. These trapped waves are associated with velocity and temperature oscillations at periods of 15–16 days, similar to the dominant period of some equatorial Yanai waves. Energy flux maps using POP output suggest that quasi-biweekly equatorial Yanai waves excite trapped waves on the western and south-western flanks of the Seychelles Plateau, near the surface. Here, the anticyclonic energy flux associated with the trapped wave extends vertically throughout the water column and around most of the plateau circumference, diminishing on the eastern flank of the plateau. This work highlights the role that equatorial planetary waves and trapped waves play in facilitating energy redistribution, dissipation, and mixing in the tropical ocean.

58 GEOSCIENCES↗
DOE OSTI2020

The Large-Scale Vorticity Balance of the Antarctic Continental Margin in a Fine-Resolution Global Simulation

The depth-integrated vorticity budget of a global, eddy-permitting ocean/sea ice simulation over the Antarctic continental margin (ACM) is diagnosed to understand the physical mechanisms implicated in meridional transport. The leading-order balance is between the torques due to lateral friction, nonlinear effects, and bottom vortex stretching, although details vary regionally. Maps of the time-averaged depth-integrated vorticity budget terms and time series of the spatially averaged, depth-integrated vorticity budget terms reveal that the flow in the Amundsen, Bellingshausen, and Weddell Seas and, to a lesser extent, in the western portion of East Antarctica, is closer to an approximate topographic Sverdrup balance (TSB) compared to other segments of the ACM. Correlation and coherence analyses further support these findings, and also show that inclusion of the vorticity tendency term in the response (the planetary vorticity advection and the bottom vortex stretching term) increases the correlation with the forcing (the vertical net stress curl), and also increases the coherence between forcing and response at high frequencies across the ACM, except for the West Antarctic Peninsula. Finally, these findings suggest that the surface stress curl, imparted by the wind and the sea ice, has the potential to contribute to the meridional, approximately cross-slope, transport to a greater extent in the Amundsen, Bellingshausen, Weddell, and part of the East Antarctic continental margin than elsewhere in the ACM.

58 GEOSCIENCES↗
DOE OSTI2020

Attosecond science based on high harmonic generation from gases and solids

Recent progress in high power ultrafast short-wave and mid-wave infrared lasers has enabled gas-phase high harmonic generation (HHG) in the water window and beyond, as well as the demonstration of HHG in condensed matter. In this Perspective, we discuss the recent advancements and future trends in generating and characterizing soft X-ray pulses from gas-phase HHG and extreme ultraviolet (XUV) pulses from solid-state HHG. Then, we discuss their current and potential usage in time-resolved study of electron and nuclear dynamics in atomic, molecular and condensed matters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗