Search NASA⌕ Search

Engineering topics

Wang, Jingyu

Publications and source records attributed to Wang, Jingyu.

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Climatological occurrences of hail and tornadoes associated with mesoscale convective systems in the United States

Hail and tornadoes are hazardous weather events responsible for significant property damage and economic loss worldwide. The most devastating occurrences of hail and tornadoes are commonly produced by supercells in the United States. However, these supercells may also grow upscale into mesoscale convective systems (MCSs) or be embedded within them. The relationship between hail and tornado occurrences with MCSs in the long-term climatology has not been thoroughly examined. In this study, radar features associated with MCSs are extracted from a 14-year MCS tracking database across the contiguous United States, and hazard reports are mapped to these MCS features. We investigate the characteristics of hail and tornadoes in relation to MCSs, considering seasonal and regional variabilities. On average, 8 %–17 % of hail events and 17 %–32 % of tornado events are associated with MCSs, depending on the criteria used to define MCSs. The highest total and MCS-associated hazard events occur from March to May, while the highest MCS-associated portion (23 % for hail and 45 % for tornadoes) is observed in winter (December–February) due to the dominance of MCSs caused by strong synoptic forcing. As hailstone size increases, the fraction associated with MCS decreases, but there is an increasing trend for tornado severity from EF0 to EF3 (Enhanced Fujita Scale). Violent tornadoes at EF4 and EF5 associated with MCSs were also observed, which are generated by supercells embedded within MCSs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Characterization of the aerosol vertical distributions and their impacts on warm clouds based on multi-year ARM observations

Aerosol vertical distribution plays a crucial role in cloud development and thus precipitation since both aerosol indirect and semi-direct effects significantly depend on the relative position of aerosol layer in reference to cloud, but its precise influence on cloud remains unclear. In this study, we integrated multi-year Raman Lidar measurements of aerosol vertical profiles from the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) facility with available Value-Added Products of cloud features to characterize aerosol vertical distributions and their impacts on warm clouds over the continental and marine ARM atmospheric observatories, i.e., Southern Great Plains (SGP) and Eastern North Atlantic (ENA). A unimodal seasonal distribution of aerosol optical depths (AODs) with a peak in summer is found at upper boundary layer over SGP, while a bimodal distribution is observed at ENA for the AODs at lower levels with a major winter-spring maximum. The diurnal mean of upper-level AOD at SGP shows a maximum in the early evening. According to the relative positions of aerosol layers to clouds we further identify three primary types of aerosol vertical distribution, including Random, Decreasing, and Bottom. It is found that the impacts of aerosols on cloud may or may not vary with aerosol vertical distribution depending on environmental conditions, as reflected by the wide variations of the relations between AOD and cloud properties. For example, as AOD increases, the liquid water paths (LWPs) tend to be reduced at SGP but enhanced at ENA. The relations of cloud droplet effective radius with AOD largely depend on aerosol vertical distributions, particularly showing positive values in the Random type under low-LWP condition (<50gm -2 ). In conclusion, the distinct features of aerosol-cloud interactions in relation to aerosol vertical distribution are likely attributed to the continental-marine contrast in thermodynamic environments and aerosol conditions between SGP and ENA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Urbanization may enhance tornado potential: A single case report

Tornadoes pose a risk of catastrophic economic loss and casualty in the United States. Modification of land use by urbanization alters the meteorological conditions that may impact tornado formation and intensification processes. Here we explored the simulated impact of Kansas City urbanization on the tornado potential of a supercell storm. In this studied case, we found that urbanization might enhance tornado potential by a) strengthening the low-level streamwise vorticity in the storm inflow region, thus forming stronger rotating updrafts; and b) intensifying near-surface horizontal vorticity near the boundary of the forward-flank cold pool which increases the ingestion, tilting, and stretching of streamwise horizontal vorticity into vertical vorticity. The former results from the stronger east-to-west pressure perturbation gradient due to the faster, stronger outflow boundary, and the latter is mainly a result of stronger cold fronts and a better alignment of storm-relative inflow with the horizontal vorticity vector. We emphasize that our conclusions only represent one possibility of how urbanization would affect tornado potential, and a more systematic examination is needed to achieve a more general conclusion.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Machine Learning of Key Variables Impacting Extreme Precipitation in Various Regions of the Contiguous United States

Abstract Amplification in extreme precipitation intensity and frequency can cause severe flooding and impose significant social and economic consequences. Variations in extreme precipitation intensity, frequencies, and return periods can be attributed to many physical variables across spatial and temporal scales. Here we employ ensemble machine learning (ML) methods, namely random forest (RF), eXtreme Gradient Boosting (XGB), and artificial neural networks (ANN), to explore key contributing variables to monthly extreme precipitation intensity and frequency in six regions over the United States. We further establish emulators for return periods. Results show that the ML models for intensity perform better in regions with obvious seasonality (i.e., Northern Great Plains, Southern Great Plains, and West Coast) than the other three regions (Northeast, Southwest, and Rocky Mountains), while for frequency the models perform well for most regions. The Shapley additive explanation is used to help explain the relationships between extreme precipitation characteristics and identify top variables for RF and XGB. We find that latent heat flux, relative humidity, soil moisture, and large‐scale subsidence are key common variables across the regions for both monthly intensity and frequency, and their compound effects are non‐negligible. The developed ML models capture the probability and return period of extreme precipitation well for all regions and may be used for decision making (e.g., infrastructure planning and design).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Contrasting Responses of Hailstorms to Anthropogenic Climate Change in Different Synoptic Weather Systems

Hailstones and extreme precipitation generate substantial economic losses across the United States (US) and the globe. Their strong association with short-lived, intense convective storms poses a great challenge in predicting their future changes. Here, we conducted model simulations at 1.2 km grid spacing for severe convective storms with large hail and heavy precipitation that occurred in two typical types of synoptic-scale environments in spring seasons over the central US under both current and future climate conditions. We find that the responses of large hail (diameters >2.5 cm) to anthropogenic climate change (ACC) are markedly different between the hailstorms developed in the two types of synoptic-scale environments, with over 110% increase in large hail occurrences for the frontal systems, whereas less than 30% increase for the Great Plains low-level jet (GPLLJ) systems. This is explained by the larger increase in convective intensity and updraft width and a smaller increase in warm cloud depth in the frontal storms compared with the GPLLJ storms. Interestingly, the occurrences and intensity of heavy precipitation (rain rate >20 mm hr-1) in both types of systems are similarly sensitive to ACC (e.g., 40% and 33% increases in the occurrences for the frontal and GPLLJ systems, respectively). These results advance our knowledge of hail projection and have important implications for managing risks for future hail.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Better calibration of cloud parameterizations and subgrid effects increases the fidelity of the E3SM Atmosphere Model version 1

Abstract. Realistic simulation of the Earth's mean-state climate remains a major challenge, and yet it is crucial for predicting the climate system in transition. Deficiencies in models' process representations, propagation of errors from one process to another, and associated compensating errors can often confound the interpretation and improvement of model simulations. These errors and biases can also lead to unrealistic climate projections and incorrect attribution of the physical mechanisms governing past and future climate change. Here we show that a significantly improved global atmospheric simulation can be achieved by focusing on the realism of process assumptions in cloud calibration and subgrid effects using the Energy Exascale Earth System Model (E3SM) Atmosphere Model version 1 (EAMv1). The calibration of clouds and subgrid effects informed by our understanding of physical mechanisms leads to significant improvements in clouds and precipitation climatology, reducing common and long-standing biases across cloud regimes in the model. The improved cloud fidelity in turn reduces biases in other aspects of the system. Furthermore, even though the recalibration does not change the global mean aerosol and total anthropogenic effective radiative forcings (ERFs), the sensitivity of clouds, precipitation, and surface temperature to aerosol perturbations is significantly reduced. This suggests that it is possible to achieve improvements to the historical evolution of surface temperature over EAMv1 and that precise knowledge of global mean ERFs is not enough to constrain historical or future climate change. Cloud feedbacks are also significantly reduced in the recalibrated model, suggesting that there would be a lower climate sensitivity when it is run as part of the fully coupled E3SM. This study also compares results from incremental changes to cloud microphysics, turbulent mixing, deep convection, and subgrid effects to understand how assumptions in the representation of these processes affect different aspects of the simulated atmosphere as well as its response to forcings. We conclude that the spectral composition and geographical distribution of the ERFs and cloud feedback, as well as the fidelity of the simulated base climate state, are important for constraining the climate in the past and future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Impact of a New Cloud Microphysics Parameterization on the Simulations of Mesoscale Convective Systems in E3SM

Abstract Mesoscale convective systems (MCSs) are one of the most climatically significant forms of convection because of their large role in water and energy cycles. The mesoscale features associated with MCS are difficult to represent in climate models because the relevant dynamics and physics are absent or poorly represented with coarse model resolution (∼100 km). Using a regionally refined model (RRM) with 0.25° grid spacing embedded in the Energy Exascale Earth System Model (E3SM), we explore the impact of cloud microphysics parameterizations on the simulation of precipitation, particularly MCS precipitation over the contiguous United States. The Predicted Particle Properties (P3) cloud microphysics scheme has been modified and implemented into E3SM to overcome the limitations of the default Morrison and Gettelman (MG2) scheme in which rimed precipitating ice particles (graupel/hail) are absent and frozen particles are artificially partitioned into cloud ice and snow. We show that P3 improves the simulation of precipitation statistics including frequency distribution compared with MG2 with a limited effect on the diurnal cycle. P3 predicts higher hourly rain rates, resulting in 20% more MCSs and a higher total MCS precipitation (4.4%) compared to MG2, agreeing better with observations. The improvements with P3 mainly result from improved representations of ice microphysics, which not only produces higher rain rates through melting but also leads to a stronger large‐scale ascending motion by releasing more latent heating. This study suggests that improving microphysics parameterization is important for simulating MCS precipitation as future climate model resolutions continue to increase.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Critical values of cyber parameters in a dynamic microgrid system

An islanded microgrid can be used to serve critcal load as a resiliency source when a severe outage occurs. In an islanded mode, control of a microgrid relies on the communication system significantly. Hence, microgrids are cyberphysical systems and, therefore, the cyber system plays a crucial role in the performance of the cyber-power system. A microgrid control scheme is proposed for power dispatch and regulation based on the droop and proportional-integral (PI) feedback control. The proposed control strategy is validated for transient stability following dynamic events. To evaluate the impact of a networked control system on control performance, a cyber model is developed to represent data acquisition periods and communication delays. An analytical method is proposed to determine the critical values for the data reporting periods and communication delays. The analytical method based on a state space model of a networked control system is applicable for large-scale systems. A 2-dimensional stability region of a microgrid in the space of cyber parameters can be obtained by the proposed method, and the critical values of cyber parameters are determined based on the stability region. Simulation results validate that the design of a microgrid as a cyber-physical system needs to be guided by critical values for the data reporting period and communication delay to prevent system instability.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

A Global High‐Resolution Mesoscale Convective System Database Using Satellite‐Derived Cloud Tops, Surface Precipitation, and Tracking

Abstract A new methodology is developed to construct a global (60°S–60°N) long‐term (2000–2019) high‐resolution (∼10‐km h) mesoscale convective system (MCS) database by tracking MCS jointly using geostationary satellite infrared brightness temperature ( T b ) and precipitation feature (PF) characteristics from the Integrated Multi‐satellitE Retrievals for GPM precipitation data sets. Independent validation shows that the satellite‐based MCS data set is able to reproduce important MCS statistics derived from ground‐based radar network observations in the United States and China. We show that by carefully considering key PF characteristics in addition to T b signatures, the new method significantly improves upon previous T b ‐only methods in detecting MCSs in the midlatitudes for all seasons. Results show that MCSs account for over 50% of annual total rainfall across most of the tropical belt and in selected regions of the midlatitudes, with a strong seasonality over many regions of the globe. The tracking database allows Lagrangian aspects such as MCS lifetime and translational speed and direction to be analyzed. The longest‐lived MCSs preferentially occur over the subtropical oceans. The land MCSs have higher cloud‐tops associated with more intense convection, and oceanic MCSs have much higher rainfall production. While MCSs are observed in many regions of the globe, there are fundamental differences in their dynamic and thermodynamic structures that warrant a better understanding of processes that control their evolution. This global database provides significant opportunities for observational and modeling studies of MCSs, their characteristics, and roles in regional and global water and energy cycles, as well as their hydrologic and other impacts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Develop a weather-aware climate model to understand and predict extremes and associated power outages and renewable energy shortages with uncertainty-aware and physics-informed machine learning

Focal Area(s): The focus area is predictive modeling through the use of AI techniques and AI-derived model components with a particular emphasis on extreme weather in Atmospheric Science and power outages and shortages in Energy Science. Science Challenge: Predicting weather extremes (e.g., heavy precipitation, strong wind, and large hailstones), and weather-related power system outages and shortages can mitigate economic losses, save lives, support renewables integration, and improve power system resiliency. However, currently, the poor reliability and large uncertainty associated with the weather extreme prediction in the current climate models make the problem intractable. The key challenges are: (1) physical factors like green-house gases (GHGs), aerosols, and land use and land cover (LULC) can significantly impact extreme storms, but the understanding of these impacts is limited, particularly globally; (2) the convective permitting resolutions needed to model severe convective storms and their impacts are computationally prohibitive with global climate models (GCMs); (3) interactions between weather extremes and power system outages are complex and subject to great uncertainty. Current outage prediction models are short lead (~ 3 days), which do not allow for long-time planning of energy production and distribution. Moreover, we have limited capacity to predict weather events leading to sustained shortages in a renewable-energy-dominated power system. These challenges drive motivation for mechanistic understanding and reliable and efficient predictive modeling of extremes and their impacts from the sub-seasonal to long term projections.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Bioresorbable Primary Battery Anodes Built on Core–Double-Shell Zinc Microparticle Networks

Bioresorbable implantable electronics require power sources that are also bioresorbable with controllable electrical output and lifetime. In this paper, we report a bioresorbable zinc primary battery anode filament based on a zinc microparticle (MP) network coated with chitosan and Al 2 O 3 double shells. When discharged in 0.9% NaCl saline, a Zn MP filament with a 0.17 × 2 mm 2 cross-sectional area exhibited a stable voltage output of 0.55 V at a current of 0.01 mA. Covered by chitosan and Al 2 O 3 double shells, the zinc MP filament exhibited a directional dissolution behavior with a tunable lifetime approximately linear to its length. A stable 200 h discharging time was achieved with a 15 mm Zn MP filament. The maximum output power was found to be 12 μW at 0.03 mA for one filament. The linearity relationship between the current output and the filament cross-sectional area suggested a facile strategy to raise the power output at constant discharging voltage. The filaments could also be connected in series and in parallel to boost its overall voltage and current output, demonstrating their excellent integration capability. Furthermore, this work presents a promising pathway toward bioresorbable transient batteries with controllable lifetime and power output, demonstrating a great potential for powering transient implantable biomedical devices.

25 ENERGY STORAGE↗
DOE OSTI2021

Urbanization-induced land and aerosol impacts on storm propagation and hail characteristics

Changes in land surface and aerosol characteristics from urbanization can affect dynamic and microphysical properties of severe storms, thus affecting hazardous weather events resulting from such storms such as hail and tornado. We examine the joint and individual effects of urban land and anthropogenic aerosols of Kansas City on a severe convective storm observed during the 2015 Plains Elevated Convection At Night (PECAN) field campaign, focusing on storm evolution, convective intensity, and hail characteristics. The simulations are carried out at the cloud-resolving scale (1 km) using a version of WRF-Chem in which the spectral-bin microphysics (SBM) is coupled with the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC). It is found that the urban land effect of Kansas City initiated a much stronger convective cell and the storm got further intensified when interacting with stronger turbulence induced by the urban land. The urban land effect also changed the storm path by diverting the storm toward the city mainly resulting from enhanced urban land-induced convergence in the urban area and around the urban-rural boundaries. The joint effect of urban land and anthropogenic aerosols enhances occurrences of both severe hail and significant severe hail by ~ 20% by enhancing hail formation and growth from riming. Overall the urban land effect on convective intensity and hail is relatively larger than the anthropogenic aerosol effect, but the joint effect is much notable than either of the individual effects, emphasizing the importance to consider both effects in evaluating urbanization effects.

Lin, Yun↗
NASA NTRS2017

Derivation of Aerosol Profiles for MC3E Convection Studies and Use in Simulations of the 20 May Squall Line Case

Advancing understanding of deep convection microphysics via mesoscale modeling studies of well-observed case studies requires observation-based aerosol inputs. Here, we derive hygroscopic aerosol size distribution input profiles from ground-based and airborne measurements for six convection case studies observed during the Midlatitude Continental Convective Cloud Experiment (MC3E) over Oklahoma. We demonstrate use of an input profile in simulations of the only well-observed case study that produced extensive stratiform outflow on 20 May 2011. At well-sampled elevations between −11 and −23 C over widespread stratiform rain, ice crystal number concentrations are consistently dominated by a single mode near approx. 400 microm in randomly oriented maximum dimension (Dmax). The ice mass at −23 C is primarily in a closely collocated mode, whereas a mass mode near Dmax approx. 1000 microns becomes dominant with decreasing elevation to the −11 C level, consistent with possible aggregation during sedimentation. However, simulations with and without observation-based aerosol inputs systematically overpredict mass peak Dmax by a factor of 3-5 and underpredict ice number concentration by a factor of 4-10. Previously reported simulations with both two-moment and size-resolved microphysics have shown biases of a similar nature. The observed ice properties are notably similar to those reported from recent tropical measurements. Based on several lines of evidence, we speculate that updraft microphysical pathways determining outflow properties in the 20 May case are similar to a tropical regime, likely associated with warm-temperature ice multiplication that is not well understood or well represented in models.

Fridlind, Ann M.↗
NASA NTRS2017

Derivation of Aerosol Profiles for MC3E Convection Studies and Use in Simulations of the 20 May Squall Line Case

Advancing understanding of deep convection microphysics via mesoscale modeling studies of well-observed case studies requires observation-based aerosol inputs. Here, we derive hygroscopic aerosol size distribution input profiles from ground-based and airborne measurements for six convection case studies observed during the Midlatitude Continental Convective Cloud Experiment (MC3E) over Oklahoma. We demonstrate use of an input profile in simulations of the only well-observed case study that produced extensive stratiform outflow on 20 May 2011. At well-sampled elevations between -11 and -23 degree C over widespread stratiform rain, ice crystal number concentrations are consistently dominated by a single mode near 400 micrometer in randomly oriented maximum dimension (D[superscript max] ). The ice mass at -23 degree C is primarily in a closely collocated mode, whereas a mass mode near D[superscript max] -1000 micrometer becomes dominant with decreasing elevation to the -11 degree C level, consistent with possible aggregation during sedimentation. However, simulations with and without observation-based aerosol inputs systematically overpredict mass peak D[superscript max] by a factor of 3-5 and underpredict ice number concentration by a factor of 4-10. Previously reported simulations with both two-moment and size-resolved microphysics have shown biases of a similar nature. The observed ice properties are notably similar to those reported from recent tropical measurements. Based on several lines of evidence, we speculate that updraft microphysical pathways determining outflow properties in the 20 May case are similar to a tropical regime, likely associated with warm-temperature ice multiplication that is not well understood or well represented in models.

Fridlind, Ann M.↗