Search NASA⌕ Search

Engineering topics

Wang, L F

Publications and source records attributed to Wang, L F.

Coupling between interface and velocity perturbations in the weakly nonlinear Rayleigh-Taylor instability

Weakly nonlinear (WN) Rayleigh-Taylor instability (RTI) initiated by single-mode cosinusoidal interface and velocity perturbations is investigated analytically up to the third order. Expressions of the temporal evolutions of the amplitudes of the first three harmonics are derived. It is shown that there are coupling between interface and velocity perturbations, which plays a prominent role in the WN growth. When the 'equivalent amplitude' of the initial velocity perturbation, which is normalized by its linear growth rate, is compared to the amplitude of the initial interface perturbation, the coupling between them dominates the WN growth of the RTI. Furthermore, the RTI would be mitigated by initiating a velocity perturbation with a relative phase shift against the interface perturbation. More specifically, when the phase shift between the interface perturbation and the velocity perturbation is {pi} and their equivalent amplitudes are equal, the RTI could be completely quenched. If the equivalent amplitude of the initial velocity perturbation is equal to the initial interface perturbation, the difference between the WN growth of the RTI initiated by only an interface perturbation and by only a velocity perturbation is found to be asymptotically negligible. The dependence of the WN growth on the Atwood numbers and the initial perturbation amplitudes is discussed. In particular, we investigate the dependence of the saturation amplitude (time) of the fundamental mode on the Atwood numbers and the initial perturbation amplitudes. It is found that the Atwood numbers and the initial perturbation amplitudes play a crucial role in the WN growth of the RTI. Thus, it should be included in applications where the seeds of the RTI have velocity perturbations, such as inertial confinement fusion implosions and supernova explosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation of jet-like spikes from the ablative Rayleigh-Taylor instability

The mechanism of jet-like spike formation from the ablative Rayleigh-Taylor instability (ARTI) in the presence of preheating is reported. It is found that the preheating plays an essential role in the formation of the jet-like spikes. In the early stage, the preheating significantly increases the plasma density gradient, which can reduce the linear growth of ARTI and suppress its harmonics. In the middle stage, the preheating can markedly increase the vorticity convection and effectively reduce the vorticity intensity resulting in a broadened velocity shear layer near the spikes. Then the growth of ablative Kelvin-Helmholtz instability is dramatically suppressed and the ARTI remains dominant. In the late stage, nonlinear bubble acceleration further elongates the bubble-spike amplitude and eventually leads to the formation of jet-like spikes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stabilization of the Rayleigh-Taylor instability in quantum magnetized plasmas

In this research, stabilization of the Rayleigh-Taylor instability (RTI) due to density gradients, magnetic fields, and quantum effects, in an ideal incompressible plasma, is studied analytically and numerically. A second-order ordinary differential equation (ODE) for the RTI including quantum corrections, with a continuous density profile, in a uniform external magnetic field, is obtained. Analytic expressions of the linear growth rate of the RTI, considering modifications of density gradients, magnetic fields, and quantum effects, are presented. Numerical approaches are performed to solve the second-order ODE. The analytical model proposed here agrees with the numerical calculation. It is found that the density gradients, the magnetic fields, and the quantum effects, respectively, have a stabilizing effect on the RTI (reduce the linear growth of the RTI). The RTI can be completely quenched by the magnetic field stabilization and/or the quantum effect stabilization in proper circumstances leading to a cutoff wavelength. The quantum effect stabilization plays a central role in systems with large Atwood number and small normalized density gradient scale length. The presence of external transverse magnetic fields beside the quantum effects will bring about more stability on the RTI. The stabilization of the linear growth of the RTI, for parameters closely related to inertial confinement fusion and white dwarfs, is discussed. Results could potentially be valuable for the RTI treatment to analyze the mixing in supernovas and other RTI-driven objects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Density gradient effects in weakly nonlinear ablative Rayleigh-Taylor instability

In this research, density gradient effects (i.e., finite thickness of ablation front effects) in ablative Rayleigh-Taylor instability (ARTI), in the presence of preheating within the weakly nonlinear regime, are investigated numerically. We analyze the weak, medium, and strong ablation surfaces which have different isodensity contours, respectively, to study the influences of finite thickness of ablation front on the weakly nonlinear behaviors of ARTI. Linear growth rates, generation coefficients of the second and the third harmonics, and coefficients of the third-order feedback to the fundamental mode are obtained. It is found that the linear growth rate which has a remarkable maximum, is reduced, especially when the perturbation wavelength {lambda} is short and a cut-off perturbation wavelength {lambda}{sub c} appears when the perturbation wavelength {lambda} is sufficiently short, where no higher harmonics exists when {lambda}<{lambda}{sub c}. The phenomenon of third-order positive feedback to the fundamental mode near the {lambda}{sub c}[J. Sanz et al., Phys. Rev. Lett. 89, 195002 (2002); J. Garnier et al., Phys. Rev. Lett. 90, 185003 (2003); J. Garnier and L. Masse, Phys. Plasmas 12, 062707 (2005)] is confirmed in numerical simulations, and the physical mechanism of the third-order positive feedback is qualitatively discussed. Moreover, it is found that generations and growths of the second and the third harmonics are stabilized (suppressed and reduced) by the ablation effect. Meanwhile, the third-order negative feedback to the fundamental mode is also reduced by the ablation effect, and hence, the linear saturation amplitude (typically {approx}0.2{lambda} in our simulations) is increased significantly and therefore exceeds the classical prediction 0.1{lambda}, especially for the strong ablation surface with a small perturbation wavelength. Overall, the ablation effect stabilizes the ARTI in the weakly nonlinear regime. Numerical results obtained are in general agreement with the recent weakly nonlinear theories and simulations as proposed [J. Sanz et al., Phys. Rev. Lett. 89, 195002 (2002); J. Garnier et al., Phys. Rev. Lett. 90, 185003 (2003); J. Garnier and L. Masse, Phys. Plasmas 12, 062707 (2005)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of Magnetic Resonances in Electron Clouds in a Positron Storage Ring

The first experimental observation of magnetic resonances in electron clouds is reported. The resonance was observed as a modulation in cloud intensity for uncoated as well as TiN-coated aluminum surfaces in the positron storage ring of the PEP-II collider at SLAC. Electron clouds frequently arise in accelerators of positively charged particles, and severely impact the machines performance. The TiN coating was found to be an effective remedy, reducing the cloud intensity by three orders of magnitude.

43 PARTICLE ACCELERATORS↗

Magnetic field gradient effects on Rayleigh-Taylor instability with continuous magnetic field and density profiles

In this paper, the effects of magnetic field gradient (i.e., the magnetic field transition layer effects) on the Rayleigh-Taylor instability (RTI) with continuous magnetic field and density profiles are investigated analytically. The transition layers of magnetic field and density with two different typical profiles are studied and the analytic expressions of the linear growth rate of the RTI are obtained. It is found that the magnetic field effects strongly reduce the linear growth rate of the RTI, especially when the perturbation wavelength is short. The linear growth rate of the RTI increases with the thickness of the magnetic field transition layer, especially for the case of small thickness of the magnetic field transition layer. When the magnetic field transition layer width is long enough, the linear growth rate of the RTI can be saturated. Thus when one increases the width of the magnetic field transition layer, the linear growth rate of the RTI increases only in a certain range, which depends on the magnetic field strength. The numerical results are compared with the analytic linear growth rates and they agree well with each other.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Competitions between Rayleigh-Taylor instability and Kelvin-Helmholtz instability with continuous density and velocity profiles

In this research, competitions between Rayleigh-Taylor instability (RTI) and Kelvin-Helmholtz instability (KHI) in two-dimensional incompressible fluids within a linear growth regime are investigated analytically. Normalized linear growth rate formulas for both the RTI, suitable for arbitrary density ratio with continuous density profile, and the KHI, suitable for arbitrary density ratio with continuous density and velocity profiles, are obtained. The linear growth rates of pure RTI ({gamma}{sub RT}), pure KHI ({gamma}{sub KH}), and combined RTI and KHI ({gamma}{sub total}) are investigated, respectively. In the pure RTI, it is found that the effect of the finite thickness of the density transition layer (L{sub {rho}}) reduces the linear growth of the RTI (stabilizes the RTI). In the pure KHI, it is found that conversely, the effect of the finite thickness of the density transition layer increases the linear growth of the KHI (destabilizes the KHI). It is found that the effect of the finite thickness of the density transition layer decreases the ''effective'' or ''local'' Atwood number (A) for both the RTI and the KHI. However, based on the properties of {gamma}{sub RT}{proportional_to}{radical}(A) and {gamma}{sub KH}{proportional_to}{radical}(1-A{sup 2}), the effect of the finite thickness of the density transition layer therefore has a completely opposite role on the RTI and the KHI noted above. In addition, it is found that the effect of the finite thickness of the velocity shear layer (L{sub u}) stabilizes the KHI, and for the most cases, the combined effects of the finite thickness of the density transition layer and the velocity shear layer (L{sub {rho}=}L{sub u}) also stabilize the KHI. Regarding the combined RTI and KHI, it is found that there is a competition between the RTI and the KHI because of the completely opposite effect of the finite thickness of the density transition layer on these two kinds of instability. It is found that the competitions between the RTI and the KHI depend, respectively, on the Froude number, the density ratio of the light fluid to the heavy one, and the finite thicknesses of the density transition layer and the velocity shear layer. Furthermore, for the fixed Froude number, the linear growth rate ratio of the RTI to the KHI decreases with both the density ratio and the finite thickness of the density transition layer, but increases with the finite thickness of the velocity shear layer and the combined finite thicknesses of the density transition layer and the velocity shear layer (L{sub {rho}=}L{sub u}). In summary, our analytical results show that the effect of the finite thickness of the density transition layer stabilizes the RTI and the overall combined effects of the finite thickness of the density transition layer and the velocity shear layer (L{sub {rho}=}L{sub u}) also stabilize the KHI. Thus, it should be included in applications where the transition layer effect plays an important role, such as the formation of large-scale structures (jets) in high energy density physics and astrophysics and turbulent mixing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spike deceleration and bubble acceleration in the ablative Rayleigh-Taylor instability

The nonlinear evolutions of the Rayleigh-Taylor instability (RTI) with preheat is investigated by numerical simulation (NS). A new phase of the spike deceleration evolution in the nonlinear ablative RTI (ARTI) is discovered. It is found that nonlinear evolution of the RTI can be divided into the weakly nonlinear regime (WNR) and the highly nonlinear regime (HNR) according to the difference of acceleration velocities for the spike and the bubble. With respect to the classical RTI (i.e., without heat conduction), the bubble first accelerates in the WNR and then decelerates in the HNR while the spike holds acceleration in the whole nonlinear regime (NR). With regard to the ARTI, on the contrary, the spike first accelerates in the WNR and then decelerates in the HNR while the bubble keeps acceleration in the whole NR. The NS results indicate that it is the nonlinear overpressure effect at the spike tip and the vorticity accumulation inside the bubble that lead to, respectively, the spike deceleration and bubble acceleration, in the nonlinear ARTI. In addition, it is found that in the ARTI the spike saturation velocity increases with the perturbation wavelength.

36 MATERIALS SCIENCE↗

Preheating ablation effects on the Rayleigh-Taylor instability in the weakly nonlinear regime

The two-dimensional Rayleigh-Taylor instability (RTI) with and without thermal conduction is investigated by numerical simulation in the weakly nonlinear regime. A preheat model {kappa}(T)={kappa}{sub SH}[1+f(T)] is introduced for the thermal conduction [W. H. Ye, W. Y. Zhang, and X. T. He, Phys. Rev. E 65, 057401 (2002)], where {kappa}{sub SH} is the Spitzer-Haerm electron thermal conductivity coefficient and f(T) models the preheating tongue effect in the cold plasma ahead of the ablation front. The preheating ablation effects on the RTI are studied by comparing the RTI with and without thermal conduction with identical density profile relevant to inertial confinement fusion experiments. It is found that the ablation effects strongly influence the mode coupling process, especially with short perturbation wavelength. Overall, the ablation effects stabilize the RTI. First, the linear growth rate is reduced, especially for short perturbation wavelengths and a cutoff wavelength is observed in simulations. Second, the second harmonic generation is reduced for short perturbation wavelengths. Third, the third-order negative feedback to the fundamental mode is strengthened, which plays a stabilization role. Finally, on the contrary, the ablation effects increase the generation of the third harmonic when the perturbation wavelengths are long. Our simulation results indicate that, in the weakly nonlinear regime, the ablation effects are weakened as the perturbation wavelength is increased. Numerical results obtained are in general agreement with the recent weakly nonlinear theories as proposed in [J. Sanz, J. Ramirez, R. Ramis et al., Phys. Rev. Lett. 89, 195002 (2002); J. Garnier, P.-A. Raviart, C. Cherfils-Clerouin et al., Phys. Rev. Lett. 90, 185003 (2003)].

36 MATERIALS SCIENCE↗

Formation of large-scale structures in ablative Kelvin-Helmholtz instability

In this research, we studied numerically nonlinear evolutions of the Kelvin-Helmholtz instability (KHI) with and without thermal conduction, aka, the ablative KHI (AKHI) and the classical KHI (CKHI). The second order thermal conduction term with a variable thermal conductivity coefficient is added to the energy equation in the Euler equations in the AKHI to investigate the effect of thermal conduction on the evolution of large and small scale structures within the shear layer which separate the fluids with different velocities. The inviscid hyperbolic flux of Euler equation is computed via the classical fifth order weighted essentially nonoscillatory finite difference scheme and the temperature is solved by an implicit fourth order finite difference scheme with variable coefficients in the second order parabolic term to avoid severe time step restriction imposed by the stability of the numerical scheme. As opposed to the CKHI, fine scale structures such as the vortical structures are suppressed from forming in the AKHI due to the dissipative nature of the second order thermal conduction term. With a single-mode sinusoidal interface perturbation, the results of simulations show that the growth of higher harmonics is effectively suppressed and the flow is stabilized by the thermal conduction. With a two-mode sinusoidal interface perturbation, the vortex pairing is strengthened by the thermal conduction which would allow the formation of large-scale structures and enhance the mixing of materials. In summary, our numerical studies show that thermal conduction can have strong influence on the nonlinear evolutions of the KHI. Thus, it should be included in applications where thermal conduction plays an important role, such as the formation of large-scale structures in the high energy density physics and astrophysics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Second stable regime of internal kink modes excited by barely passing energetic ions in tokamak plasmas

The internal kink (fishbone) modes, driven by barely passing energetic ions (EIs), are numerically studied with the spatial distribution of the EIs taking into account. It is found that the modes with frequencies comparable to the toroidal precession frequencies are excited by resonant interaction with the EIs. Positive and negative density gradient dominating cases, corresponding to off- and near-axis depositions of neutral beam injection (NBI), respectively, are analyzed in detail. The most interesting and important feature of the modes is that there exists a second stable regime in higher {beta}{sub h} (=pressure of EIs/toroidal magnetic pressure) range, and the modes may only be excited by the barely passing EIs in a region of {beta}{sub th1}<{beta}{sub h}<{beta}{sub th2} ({beta}{sub th} is threshold or critical beta of EIs). Besides, the unstable modes require minimum density gradients and minimum radial positions of NBI deposition. The physics mechanism for the existence of the second stable regime is discussed. The results may provide a means of reducing or even preventing the loss of NBI energetic ions and increasing the heating efficiency by adjusting the pitch angle and driving the system into the second stable regime fast enough.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interface width effect on the classical Rayleigh-Taylor instability in the weakly nonlinear regime

In this paper, the interface width effects (i.e., the density gradient effects or the density transition layer effects) on the Rayleigh-Taylor instability (RTI) in the weakly nonlinear (WN) regime are investigated by numerical simulation (NS). It is found that the interface width effects dramatically influence the linear growth rate in the linear growth regime and the mode coupling process in the WN growth regime. First, the interface width effects decrease the linear growth rate of the RTI, particularly for the short perturbation wavelengths. Second, the interface width effects suppress (reduce) the third-order feedback to the fundamental mode, which induces the nonlinear saturation amplitude (NSA) to exceed the classical prediction, 0.1lambda. The wider the density transition layer is, the larger the NSA is. The NSA in our NS can reach a half of its perturbation wavelength. Finally, the interface width effects suppress the generation and the growth of the second and the third harmonics. The ability to suppress the harmonics' growth increases with the interface width but decreases with the perturbation wavelength. On the whole, in the WN regime, the interface width effects stabilize the RTI, except for an enhancement of the NSA, which is expected to improve the understanding of the formation mechanism for the astrophysical jets, and for the jetlike long spikes in the high energy density physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Destabilizing effect of density gradient on the Kelvin-Helmholtz instability

In this paper, we derive explicit analytic formulas for the linear growth rate and frequency of the Kelvin-Helmholtz instability in fluids with the density gradient. The analytic formulas are in excellent agreement with the results of two-dimensional numerical simulation. We found that the density gradient effect enforces (destabilizes) the Kelvin-Helmholtz instability by increasing its linear growth rate in the direction normal to the perturbed interface. The frequency is reduced (stabilized) by the density gradient effect, i.e., the density gradient decreases the transmission of the perturbation in the direction along to the perturbed interface. In most cases, the combined effect of density and velocity gradients stabilizes the Kelvin-Helmholtz instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cyclotron Resonances in Electron Cloud Dynamics

A new set of resonances for electron cloud dynamics in the presence of a magnetic field has been found. For short beam bunch lengths and low magnetic fields where l{sub b} << 2{pi}{omega}{sub c}, (l{sub b} = bunch duration, {omega}{sub c} = non-relativistic cyclotron frequency) resonances between the bunch frequency and harmonics of the cyclotron frequency cause an increase in the electron cloud density in narrow ranges of magnetic field near the resonances. For ILC parameters the increase in the density is up to a factor {approx} 3, and the spatial distribution of the electrons is broader near resonances, lacking the well-defined density 'stripes' of multipactoring found for non-resonant cases. Simulations with the 2D computer code POSINST, as well as a single-particle tracking code, were used to elucidate the physics of the dynamics. The resonances are expected to affect the electron cloud dynamics in the fringe fields of conventional lattice magnets and in wigglers, where the magnetic fields are low. Results of the simulations, the reason for the bunch-length dependence, and details of the dynamics will be discussed.

43 PARTICLE ACCELERATORS↗