Search NASA⌕ Search

Engineering topics

Wang, Lei

Publications and source records attributed to Wang, Lei.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Complex-Concentrated Anion Doping Enables Ultra-Stable Lattice Oxygen and Structural Integrity in Lithium-Rich Layered Oxide Cathodes

Lithium- and manganese-rich layered oxides (LMR) stand out as next-generation lithium-ion cathode chemistries, which harness both transition-metal and lattice-oxygen redox processes to deliver exceptional capacity and energy density. However, their full potential is hindered by intrinsic oxygen instability and structural degradation, resulting in pronounced voltage fade and capacity decay. Here, we present a complex-concentrated anion-doping paradigm in which multiple anions, F, Br, and S, are incorporated into the oxygen sublattice to enhance oxygen-redox and structural stability. X-ray absorption spectroscopy and aberration-corrected scanning transmission electron microscopy confirm ultra-stable local oxygen coordination environments during long-term cycling, with detrimental phase transformations and oxygen-loss-induced cavitation dramatically inhibited. Notably, we show that the characteristic LiTM6 transition metal (TM) honeycomb ordering is preserved even after electrochemical cycling. Concurrently, this strategy yields an unprecedented volume change of only 0.63% upon charging to 4.8 V vs. Li+/Li, achieving the first zero-strain LMR cathode. The resulting LMR cathode delivers ultralow voltage fade (1 mV per cycle during the first 100 cycles and becomes negligible in subsequent cycles) and outstanding energy retention (93% after 200 cycles) in a pouch cell configuration. Our complex-concentrated anion-doping concept establishes a broadly applicable strategy for resolving chemo-mechanical failure mechanisms in ceramic intercalation electrodes for next-generation energy storage.

Li-ion batteries↗
DOE OSTI2025

Search for Solar Boosted Dark Matter Particles at the PandaX-4T Experiment

We present a novel constraint on light dark matter utilizing 1.54 metric ton/year of data acquired from the PandaX-4T dual-phase xenon time projection chamber. This constraint is derived through detecting electronic recoil signals resulting from the interaction with solar-enhanced dark matter flux. Low-mass dark matter particles, lighter than a few MeV / c 2 , can scatter with the thermal electrons in the Sun. Consequently, with higher kinetic energy, the boosted dark matter component becomes detectable via contact scattering with xenon electrons, resulting in a few keV energy deposition that exceeds the threshold of PandaX-4T. We calculate the expected recoil energy in PandaX-4T considering the Sun’s acceleration with heavy mediators and the detection capabilities of the xenon detector. The first experimental search results using the xenon detector yield the most stringent upper limits cross section of 3.51 × 10 − 39 cm 2 at 0.08 MeV / c 2 for a solar boosted dark matter mass ranging from 0.02 to 10 MeV / c 2 , achieving a 23-fold improvement compared with earlier experimental studies. Published by the American Physical Society 2025

Shen, Guofang↗
DOE OSTI2025

Cohort-based pan-cancer analysis and experimental studies reveal ISG15 gene as a novel biomarker for prognosis and immunotherapy efficacy prediction

Abstract ISG15, an interferon-stimulated ubiquitin-like protein, plays a multifaceted role in tumorigenesis and immune regulation. This study comprehensively evaluates ISG15 as a prognostic biomarker and predictor of immunotherapy response through pan-cancer bioinformatics analysis and experimental validation. By integrating multiomics data from TCGA, GEO, and clinical cohorts, we found that ISG15 is significantly overexpressed in multiple cancers and generally correlates with poor prognosis. Elevated ISG15 expression is associated with increased immune checkpoint gene expression, particularly PD-L1, and immune infiltration, notably M2-like tumor-associated macrophages. Immunohistochemistry and multiplexed immunofluorescence confirmed a strong positive correlation between ISG15, PD-L1, and M2-TAM infiltration in lung and gastric cancer samples. Functional analysis at the single-cell level revealed significant associations between ISG15 and tumor proliferation, angiogenesis, and immune suppression. Immunotherapy cohort analysis demonstrated that tumors with high ISG15 expression responded favorably to PD-L1 inhibitors but exhibited resistance to CTLA-4 blockade, findings further validated in lung cancer patients receiving anti-PD-1 therapy. These results suggest that ISG15 is a promising biomarker for prognosis and immunotherapy response prediction across cancers. Its integration into clinical decision-making may enhance personalized treatment strategies, improve immunotherapy outcomes, and provide new insights into the tumor immune microenvironment, cancer progression, and potential therapeutic targets for future drug development.

Immunology↗
DOE OSTI2025

Graphene Activated Magnesium Diboride for Moderate Pressure and Temperature Hydrogenation to Magnesium Borohydride

The hydrogenation conditions of magnesium diboride (MgB2) to magnesium borohydride (Mg(BH4)2) can be significantly enhanced through the discovery of improved modifiers. This study demonstrates that the modification of MgB2 by mechanical milling with graphene nanoplatelets significantly reduces the hydrogenation conditions of MgB2 from 900 bar and 400 degrees C for pure MgB2 to 400 bar and 300 degrees C while achieving 77% conversion to Mg(BH4)2. The introduction of the graphene additives coupled with milling leads to a reduction of the temperature and pressure required for bulk hydrogenation by 100 degrees C and 500 bar, respectively, from that of pure MgB2. The identification of graphene additives that drastically improve the hydrogenation conditions of MgB2 represents an important step toward improving hydrogen uptake kinetics to Mg(BH4)2.

complex hydrides↗
DOE OSTI2025

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

FOS: Physical sciences↗
DOE OSTI2024

Impact of Synthetic Parameters on Structure and Electrochemistry of High-Entropy Layered Oxide LiNi 0.2 Co 0.2 Mn 0.2 Al 0.2 Fe 0.2 O 2

Here, this study explored a high-entropy layered oxide (HELO), LiNi 0.2 Co 0.2 Mn 0.2 Al 0.2 Fe 0.2 O 2 , prepared by coprecipitation followed by heat treatment. Coprecipitation yielded a kinetically favored product, and the subsequent heat treatment under various temperatures and times allowed tuning the material toward more thermodynamically favored structures. Refinement of X-ray powder diffraction (XRD) revealed that after 450 °C treatment, ~12% of the Ni 2+ in the structure was located within the lithium cation layer. After heat treatment at 600, 700, and 800 °C, there was a continued decrease of Ni 2+ in the lithium cation layer to 9.3, 6.3, and 3.7%, respectively. Longer heat treatment times at 800 °C decreased the level to 2.5%. Electrochemical behavior was evaluated by cyclic voltammetry, galvanostatic cycling, rate capability testing, and electrochemical impedance spectroscopy, where increased loaded voltage, functional capacity, rate capability, and decreased impedance were observed for samples treated at higher temperatures with lower cation mixing. X-ray absorption near edge spectroscopy (XANES) data indicated that the redox activity of Ni and Co was dominant in the electrochemistry, while the participation of Mn or Fe was minimal. The level of Ni oxidation state change between charge and discharge related to the heat treatment temperature where the samples with high cation mixing showed lower capacity consistent with some Ni 3+ in the transition metal layer inaccessible for electron transfer. Longer heat treatment times at 800 °C did not continue to provide a benefit in electrochemical function even with some additional reduction in cation mixing.

25 ENERGY STORAGE↗
DOE OSTI2024

Elucidating the Discharge Behavior of Aqueous Zinc Sulfur Batteries in the Presence of Molybdenum(IV) Chalcogenide Catalyst: The Criticality of Interfacial Electrochemistry

The aqueous zinc-sulfur battery holds promise for significant capacity and energy density with low cost and safe operation based on environmentally benign materials. However, it suffers from the sluggish kinetics of the conversion reaction. Here, we highlight the efficacy of molybdenum(IV) sulfide (MoS 2 ) to reduce the overpotential of S-ZnS conversion in aqueous electrolytes and study the discharge products formed at the solid-solid and solid-liquid interfaces using experimental and theoretical approaches. Specifically, the MoS 2 -catalyzed electrochemical conversion reaction is characterized via ex situ X-ray diffraction (XRD), transmission electron microscopy (TEM) with energy dispersive spectroscopy (EDS), Raman spectroscopy, synchrotron-based Mo K-edge X-ray absorption spectroscopy (XAS), and in situ synchrotron-based X-ray computed tomography (XCT). Additionally, operando synchrotron-based S K-edge XAS and X-ray fluorescence (XRF) maps are collected to determine the spatial evolution of sulfur-based species at the electrode-electrolyte interface. Further, coupling the operando S K-edge XAS data with the simulated spectra and fitting the data suggested a possible ZnS 2 intermediate phase.

25 ENERGY STORAGE↗
DOE OSTI2024

“Flower-like” LI 4 TI 5 O 12 -multiwalled carbon nanotube composite structures with performance as highrate anode-materials for Li-ion battery applications and methods of synthesis thereof

A method of fabricating nanocomposite anode material embodying a lithium titanate (LTO)-multi-walled carbon nanotube (MWNT) composite intended for use in a lithium-ion battery includes providing multi-walled carbon nanotube (MWNTs), including nanotube surfaces, onto which functional oxygenated carboxylic acid moieties are arranged, generating 3D flower-like, lithium titanate (LTO) microspheres, including thin nanosheets and anchoring the acid-functionalized MWNTs onto surfaces of the 3D LTO microspheres by π-π interaction strategy to realize the nanocomposite anode material.

Wong, Stanislaus S.↗
DOE OSTI2024

Recent Advances in Immobilizing and Benchmarking Molecular Catalysts for Artificial Photosynthesis

Transition metal complexes have been widely used as catalysts or chromophores in artificial photosynthesis. Traditionally, they are employed in homogeneous settings. Despite their functional versatility and structural tunability, broad industrial applications of these catalysts are impeded by the limitations of homogeneous catalysis such as poor catalyst recyclability, solvent constraints (mostly organic solvents), and catalyst durability. Over the past few decades, researchers have developed various methods for molecular catalyst heterogenization to overcome these limitations. Here, in this review, we summarize recent developments in heterogenization strategies, with a focus on describing methods employed in the heterogenization process and their effects on catalytic performances. Alongside the in-depth discussion of heterogenization strategies, this review aims to provide a concise overview of the key metrics associated with heterogenized systems. We hope this review will aid researchers who are new to this research field in gaining a better understanding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Correlation of Dimer-Linker-Induced Conformational Lock with Nonradiative Energy Loss in Organic Solar Cells

The efficiencies of dimer-based devices still lag those of their small molecule-based counterparts. This is primarily due to the considerable dihedrals in the dimer skeleton, which compromises the molecular packing, thus influencing the charge generation and nonradiative voltage loss (ΔV oc,nr ). Herein, we developed two dimeric acceptors with varied π-linkers to investigate the influence of linker-induced conformational lock on ΔV oc,nr . We find that the helically lapped O-shaped dimer delivers better intermolecular packing than the planar S-shaped one that incorporates a bulkier π-linker. However, its planar skeleton is instead more favorable for forming a compact and ordered stacking with the host acceptor in ternary blend. This possibly promotes exciton dissociation, thus reducing the nonradiative decay of excited states. Moreover, its longer exciton lifetime could offer additional charge-transfer channels. Finally, these contributions effectively minimize ΔV oc,nr to 0.195 eV, while delivering a high efficiency approaching 20% in the derived ternary device.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Manganese-rich high entropy oxides for lithium-ion batteries:materials design approaches to address voltage fade

Lithium- and manganese-rich oxides are of interest as lithium-ion battery cathode materials as Mn is earth abundant, low cost, and can deliver high capacity. Herein, a high entropy strategy was used to prepare Mn rich high entropy oxide (HEO) materials by including four additional metals (Ni, Co, Fe and Al) in the compositions using a mild co-precipitation method. Two HEOs (Li x Ni 0.1 Mn 0.6 Co 0.1 Al 0.1 Fe 0.1 O y , where x = 1.5 for HEO-L and x = 0.5 for HEO-H) with layered and spinel-layered hybrid structures were investigated where the morphology, elemental composition, structure, atomic level phase distribution, and electrochemistry were determined. The HEO-L samples involve a Li 2 TMO 3 layered structure with ~39% stacking faults. HEO-H is a hybrid structure comprised of 80 wt% spinel and 20 wt% LiMO 2 layered structure. The high entropy manganese-rich HEO-L showed higher capacity and 93% retention of the average voltage after 100 cycles while HEO-H showed higher capacity retention and near 100% average voltage retention. Finally, operando X-ray absorption spectroscopy revealed that the Ni, Co, and Mn are redox active in both materials while the Fe center remains at the Fe 3+ oxidation state throughout cycling, where the changes in the oxidation states for both materials during discharge were consistent with the delivered electrochemical capacity rationalizing the observed electrochemistry.

25 ENERGY STORAGE↗
DOE OSTI2024

Self-Assembling and Pore-Forming Peptoids as Antimicrobial Biomaterials

Bacterial infections have been a serious threat to mankind throughout history. Natural antimicrobial peptides (AMPs) and their membrane-disruption mechanism have generated an immense interest in the design and development of synthetic mimetics that could overcome the intrinsic drawbacks of AMPs, such as their susceptibility to proteolytic degradation. Herein, by exploiting the self-assembly and pore-forming capabilities of sequence-defined peptoids, we discovered a new family of low molecular weight peptoid antibiotics that exhibit excellent broad-spectrum activity and high selectivity toward a panel of clinically significant Gram-positive and Gram-negative bacterial strains, including vancomycin-resistant E. faecalis (VREF), methicillin-resistant S. aureus (MRSA), methicillin-resistant S. epidermidis (MRSE), E. coli, P. aeruginosa, and K. pneumoniae. Tuning peptoid sidechain chemistry and structure enabled us to tune the efficacy of antimicrobial activity. Mechanistic studies using Transmission Electron Microscopy (TEM), bacterial membrane depolarization and lysis, and time-kill kinetics assays along with molecular dynamics simulations reveal that these peptoids kill both Gram-positive and Gram-negative bacteria through a membrane-disruption mechanism. In conclusion, these robust and biocompatible peptoid-based antibiotics can provide a valuable tool for combating the emerging drug resistance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Alkali cation-induced cathodic corrosion in Cu electrocatalysts

The reconstruction of Cu catalysts during electrochemical reduction of CO 2 is a widely known but poorly understood phenomenon. Herein, we examine the structural evolution of Cu nanocubes under CO 2 reduction reaction and its relevant reaction conditions using identical location transmission electron microscopy, cyclic voltammetry, in situ X-ray absorption fine structure spectroscopy and ab initio molecular dynamics simulation. Our results suggest that Cu catalysts reconstruct via a hitherto unexplored yet critical pathway - alkali cation-induced cathodic corrosion, when the electrode potential is more negative than an onset value (e.g., –0.4 V RHE when using 0.1 M KHCO 3 ). Having alkali cations in the electrolyte is critical for such a process. Consequently, Cu catalysts will inevitably undergo surface reconstructions during a typical process of CO 2 reduction reaction, resulting in dynamic catalyst morphologies. While having these reconstructions does not necessarily preclude stable electrocatalytic reactions, they will indeed prohibit long-term selectivity and activity enhancement by controlling the morphology of Cu pre-catalysts. Alternatively, by operating Cu catalysts at less negative potentials in the CO electrochemical reduction, we show that Cu nanocubes can provide a much more stable selectivity advantage over spherical Cu nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Aliovalent Substitution Tunes Physical Properties in a Conductive Bis(dithiolene) Two-Dimensional Metal–Organic Framework

Two-dimensional conductive metal–organic frameworks have emerged as promising electronic materials for applications in (opto)electronic, thermoelectric, magnetic, electrocatalytic, and energy storage devices. Many bottom-up or postsynthetic protocols have been developed to isolate these materials or further modulate their electronic properties. However, some methodologies commonly used in classic semiconductors, notably, aliovalent substitution, are conspicuously absent. Here, in this work, we demonstrate how aliovalent Fe(III) to Ni(II) substitution enables the isolation of a Ni bis(dithiolene) material from a previously reported Fe analogue. Detailed characterization supports the idea that aliovalent substitution of Fe(III) to Ni(II) results in an in situ oxidation of the organic dithiolene linker. This substitution-induced redox tuning modulates the electronic properties in the system, leading to higher electrical conductivity and Hall mobility but slightly lower carrier densities and weaker antiferromagnetic interactions. Moreover, this aliovalent substitution improves the material’s electrochemical stability and thus enables pseudocapacitive behavior in the Ni material. These results demonstrate how classic aliovalent substitution strategies in semiconductors can also be leveraged in conductive MOFs and add further support to this class of compounds as emerging electronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Redox Chemistry Mediated Control of Morphology and Properties in Electrically Conductive Coordination Polymers: Opportunities and Challenges

Coordination polymers (CPs) and metal–organic frameworks (MOFs) have attracted significant research interest in the past several decades due to their reticular structures and modularity. However, realizing electrically conductive CPs or MOFs with comparable properties to classic conducting organic polymers has only been a recent development. This emerging class of materials has found wide appli-cation in many fields due to combined features of structural rigidity, chemical tunability, porosity, and charge transport. Alongside many studies revealing myriad design approaches to access these materials, the role that redox chemistry plays in both material synthesis and modulation of electronic properties has been an emerging theme. This perspective provides a brief overview of select examples where redox chemistry medi-ates control of morphology and properties in electrically conductive CPs/MOFs. Here, the challenges and limitations in this area are also discussed. Particular challenges include the characterization of redox states in these materials and measuring and understanding highly correlated elec-tronic properties and other unusual physical phenomena which may be important for potential applications.

36 MATERIALS SCIENCE↗