Search NASA⌕ Search

Engineering topics

Wang, Lin-Wang

Publications and source records attributed to Wang, Lin-Wang.

At least 73 records · Page 4

Engineering Auger recombination in colloidal quantum dots via dielectric screening

Auger recombination is the main non-radiative decay pathway for multi-carrier states of colloidal quantum dots, which affects performance of most of their optical and optoelectronic applications. Outstanding single-exciton properties of CdSe/CdS core/shell quantum dots enable us to simultaneously study the two basic types of Auger recombination channels-negative trion and positive trion channels. Though Auger rates of positive trion are regarded to be much faster than that of negative trion for II-VI quantum dots in literature, our experiments find the two rates can be inverted for certain core/shell geometries. This is confirmed by theoretical calculations as a result of geometry-dependent dielectric screening. By varying the core/shell geometry, both types of Auger rates can be independently tuned for ~1 order of magnitude. Experimental and theoretical findings shed new light on designing quantum dots with necessary Auger recombination characteristics for high-power light-emitting-diodes, lasers, single-molecular tracking, super-resolution microscope, and advanced quantum light sources.

36 MATERIALS SCIENCE↗

Manipulating the Transition Dipole Moment of CsPbBr 3 Perovskite Nanocrystals for Superior Optical Properties

Colloidal cesium lead halide perovskite nanocrystals exhibit unique photophysical properties including high quantum yields, tunable emission colors, and narrow photoluminescence spectra that have marked them as promising light emitters for applications in diverse photonic devices. Randomly oriented transition dipole moments have limited the light outcoupling efficiency of all isotropic light sources, including perovskites. In this report we design and synthesize deep blue emitting, quantum confined, perovskite nanoplates and analyze their optical properties by combining angular emission measurements with back focal plane imaging and correlating the results with physical characterization. By reducing the dimensions of the nanocrystals and depositing them face down onto a substrate by spin coating, we orient the average transition dipole moment of films into the plane of the substrate and improve the emission properties for light emitting applications. We then exploit the sensitivity of the perovskite electronic transitions to the dielectric environment at the interface between the crystal and their surroundings to reduce the angle between the average transition dipole moment and the surface to only 14° and maximize potential light emission efficiency. Furthermore, this tunability of the electronic transition that governs light emission in perovskites is unique and, coupled with their excellent photophysical properties, introduces a valuable method to extend the efficiencies and applications of perovskite based photonic devices beyond those based on current materials.

2D materials↗

Density functional theory based neural network force fields from energy decompositions

In order to develop force fields (FF) for molecular dynamics simulations that retain the accuracy of ab initio density functional theory (DFT), in this work we developed a machine learning protocol based on an energy decomposition scheme that extracts atomic energies from DFT calculations. Our DFT to FF (DFT2FF) approach provides almost hundreds of times more data for the DFT energies, which dramatically improves accuracy with less DFT calculations. In addition, we use piecewise cosine basis functions to systematically construct symmetry invariant features into the neural network model. We illustrate this DFT2FF approach for amorphous silicon where only 800 DFT configurations are sufficient to achieve an accuracy of 1 meV/atom for energy and 0.1 eV/A for forces. We then use the resulting FF model to calculate the thermal conductivity of amorphous Si based on long molecular dynamics simulations. The dramatic speedup in training in our DFT2FF protocol allows the adoption of a simulation paradigm where an accurate and problem specific FF for a given physics phenomenon is trained on-the-spot through a quick DFT precalculation and FF training.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transition-metal single atoms in nitrogen-doped graphenes as efficient active centers for water splitting: a theoretical study

Highly active single-atom catalysts (SACs) have recently been intensively studied for their potential in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Due to the existence of many such SAC systems, a general understanding of the trend and designing principle is necessary to discover an optimal SAC system. In this work, by using density functional theory (DFT), we investigated a series of late single transition metals (TM = Fe, Co, Ni, Cu, and Pd) anchored on various N doped graphenes (xN–TM, x = 1–4) as electrocatalysts for both the HER and OER. Solvent effects were taken into account using an implicit continuum model. Our results reveal that the catalytic activity of SACs is determined by the local coordination number of N and TM in the catalysts. Among the considered catalysts, a low-coordinated Co site, i.e. a triple-coordinated Co, exhibits a high catalytic activity toward the HER with a calculated hydrogen adsorption free energy of –0.01 eV, whereas a high-coordinated Co center, i.e. a quadruple-coordinated Co is a promising candidate for the OER with a low computed overpotential of –0.39 V, which are comparable to those of noble metal catalysts, indicating superior HER and OER performance of N–Co co-doped graphenes. The results shed light on the potential applications of TM and N co-doped graphenes as efficient single-atom bifunctional catalysts for water splitting, thereby functioning as promising candidates for hydrogen/oxygen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design Principles for Trap-Free CsPbX 3 Nanocrystals: Enumerating and Eliminating Surface Halide Vacancies with Softer Lewis Bases

We introduce a general surface passivation mechanism for cesium lead halide perovskite materials (CsPbX 3 , X = Cl, Br, I) that is supported by a combined experimental and theoretical study of the nanocrystal surface chemistry. A variety of spectroscopic methods are employed together with ab initio calculations to identify surface halide vacancies as the predominant source of charge trapping. The number of surface traps per nanocrystal is quantified by 1 H NMR spectroscopy, and that number is consistent with a simple trapping model in which surface halide vacancies create deleterious under-coordinated lead atoms. These halide vacancies exhibit trapping behavior that differs among CsPbCl 3 , CsPbBr 3 , and CsPbI 3 . Ab initio calculations suggest that introduction of anionic X-type ligands can produce trap-free band gaps by altering the energetics of lead-based defect levels. General rules for selecting effective passivating ligand pairs are introduced by considering established principles of coordination chemistry. Introducing softer, anionic, X-type Lewis bases that target under-coordinated lead atoms results in absolute quantum yields approaching unity and monoexponential luminescence decay kinetics, thereby indicating full trap passivation. This work provides a systematic framework for preparing highly luminescent CsPbX 3 nanocrystals with variable compositions and dimensionalities, thereby improving the fundamental understanding of these materials and informing future synthetic and post-synthetic efforts toward trap-free CsPbX 3 nanocrystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of the Selective Sites for Electrochemical Reduction of CO to C 2+ Products on Copper Nanoparticles by Combining Reactive Force Fields, Density Functional Theory, and Machine Learning

Recent experiments have shown that CO reduction on oxide derived Cu nanoparticles (NP) are highly selective toward C 2+ products. However, understanding of the active sites on such NPs is limited, because the NPs have ~200 000 atoms with more than 10 000 surface sites, far too many for direct quantum mechanical calculations and experimental identifications. We show here how to overcome the computational limitation by combining multiple levels of theoretical computations with machine learning. This approach allows us to map the machine learned CO adsorption energies on the surface of the copper nanoparticle to construct the active site visualization (ASV). Furthermore, we identify the structural criteria for optimizing selective reduction by predicting the reaction energies of the potential determining step, $ΔE_{OCCOH}$, for the C 2+ product. Based on this structural criterion, we design a new periodic copper structure for CO reduction with a theoretical faradaic efficiency of 97%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Force field preconditioned ab initio structure relaxation method

We present a general method to accelerate ab initio atomic structural relaxations. In this method, the conjugate gradient ab initio relaxation is preconditioned by a force field relaxation. This force field is constructed on-the-flight with the information of the ab initio forces and the current atomic configuration. At each ab initio relaxation step, the so-constructed force field is used to prerelax the system, with the relaxation direction as the preconditioned direction for the ab initio conjugated gradient method. The force field model and its parameters are rather general making this method applicable for a wide range of systems commonly used in material simulations. We report more than 80 different systems have been tested representing different cases in material simulations. Across the board, we find accelerations mostly over a factor of 2 and for some large systems with a factor of 6 ~ 9 . There is no case where the relaxation becomes worse. The code and lib for this method are provided, which can be used as a plugin in a standard ab initio atomic relaxation code.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase-transition–induced p-n junction in single halide perovskite nanowire

Significance Functional semiconductor heterojunctions are fundamental units for building up advanced optoelectronics and circuits. Halide perovskites, representing a new class of semiconductors with soft and reconfigurable ionic bonding, hold promise for a variety of applications because of their many unusual, tunable physical properties. This paper reports the formation of the current-rectifying p-n heterojunction in single-crystalline CsSnI 3 nanowires via localized phase transition between the n-type yellow and p-type black phases. We attribute the distinction of majority carrier types in these two phases to the different formation energies of the cation and anion vacancies. The present approach to heterojunction formation could inspire deeper understanding of phase-transition dynamics and enable precise control over the design of functional heterostructures using halide perovskite building blocks.

36 MATERIALS SCIENCE↗

Charge-patching method for the calculation of electronic structure of polypeptides

Theoretical study of the electronic structures of protein is a fundamental challenge in computational biochemistry due to the large size of the systems. The electronic structure of a protein is important for some of the important protein functionalities, such as photosynthesis. Here, we explored the charge-patching method to calculate the electronic structure of polypeptides. This method generates the charge densities of the systems by patching the charge motifs calculated from small prototype systems. The method was tested on a range of polypeptides, including the glycine polypeptide in 2 7 -ribbon, α-helix, 3 10 -helix, and β-strand structures. After the charge density profiles of these systems were obtained, the electronic structures of these glycine polypeptides were further calculated based on density functional theory (DFT) using a folded-spectrum method. The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) were analyzed and compared with conventional direct DFT calculations. The charge-patching method results were found to be in good agreement with the directed DFT results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linear Scaling 3 Dimensional Fragment Method v1

The software is a divide-and-conquer method to calculate the material properties using density functional theory (DFT) that scales linearly. Local effects (e.g., quantum) are calculated in small domains while macro effects (e.g., electrostatic) are calculated globally.

Wang, Lin-Wang↗

Theoretical Investigation of 2D Conductive Microporous Coordination Polymers as Li-S Battery Cathode with Ultrahigh Energy Density

Even though tremendous achievement has been made experimentally in the performance of lithium–sulfur (Li–S) battery, theoretical studies in this area are lagging behind due to the complexity of the Li–S systems and the effects of solvent. Because of this, a new methodology is developed for investigating the 2D hexaaminobenzene-based coordination polymers (2D-HAB-CPs) as cathode candidate materials for Li–S batteries via density functional theory calculations in combination with an in-house developed charge polarized solvent model and a genetic algorithm structure global search code. With high ratios of transition metal atoms and two-coordinated nitrogen atoms, excellent electric conductivity, and structural porosity, the 2D-HAB-CP is able to address all of the three main challenges facing Li–S batteries: confining the lithium polysulfides from dissolution, facilitating the electron conductivity and buffering the volumetric expansion during the lithiation process. In addition, the theoretical energy density of this system is as high as 1395 Wh kg -1 . These results demonstrate that the 2D-HAB-CP is a promising cathode material for Li–S batteries. The proposed computational framework not only opens a new avenue for understanding the key role played by solution and liquid electrolytes in Li–S batteries, but also can be generally applied to other processes with liquids involved.

25 ENERGY STORAGE↗

Tracking the Chemical and Structural Evolution of the TiS 2 Electrode in the Lithium-Ion Cell Using Operando X-ray Absorption Spectroscopy

As the lightest and cheapest transition metal dichalcogenide, TiS 2 possesses great potential as an electrode material for lithium batteries due to the advantages of high energy density storage capability, fast ion diffusion rate, and low volume expansion. Despite the extensive investigation of its electrochemical properties, the fundamental discharge-charge reaction mechanism of the TiS 2 electrode is still elusive. In this paper, by a combination of ex situ and operando X-ray absorption spectroscopy with density functional theory calculations, we have clearly elucidated the evolution of the structural and chemical properties of TiS 2 during the discharge-charge processes. The lithium intercalation reaction is highly reversible and both Ti and sulfur are involved in the redox reaction during the discharge and charge processes. In contrast, the conversion reaction of TiS 2 is partially reversible in the first cycle. However, Ti–O related compounds are developed during electrochemical cycling over extended cycles, which results in the decrease of the conversion reaction reversibility and the rapid capacity fading. In addition, the solid electrolyte interphase formed on the electrode surface is found to be highly dynamic in the initial cycles and then gradually becomes more stable upon further cycling. Finally, such understanding is important for the future design and optimization of TiS 2 based electrodes for lithium batteries.

25 ENERGY STORAGE↗

Designing a porous-crystalline structure of β-Ga 2 O 3 : a potential approach to tune its opto-electronic properties

β-Ga 2 O 3 has drawn recent attention as a state-of-the-art electronic material due to its stability, optical transparency and appealing performance in power devices. However, it has also found a wider range of opto-electronic applications including photocatalysis, especially in its porous form. For such applications, a lower band gap must be obtained and an electron–hole spatial separation would be beneficial. Like many other metal oxides ( e.g. Al 2 O 3 ), Ga 2 O 3 can also form various types of porous structure. Herein, we investigate how its optical and electronic properties can be changed in a particular porous structure with stoichiometrically balanced and extended vacancy channels. We apply a set of first principles computational methods to investigate the formation and the structural, dynamic, and opto-electronic properties. We find that such an extended vacancy channel is mechanically stable and has relatively low formation energy. We also find that this results in a spatial separation of the electron and hole, forming a long-lived charge transfer state that has desirable characteristics for a photocatalyst. In addition, the electronic band gap reduces to the vis-region unlike the transparency in the pure β-Ga 2 O 3 crystal. Thus, our systematic study is promising for the application of such a porous structure of β-Ga 2 O 3 as a versatile electronic material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗