Engineering topics
Wang, Luhong
Publications and source records attributed to Wang, Luhong.
Record high T[subscript c] element superconductivity achieved in titanium
Explore the source record for details and available documents.
Superconductivity above 200 K discovered in superhydrides of calcium
Searching for superconductivity with T c near room temperature is of great interest both for fundamental science & many potential applications. Here we report the experimental discovery of superconductivity with maximum critical temperature (T c ) above 210 K in calcium superhydrides, the new alkali earth hydrides experimentally showing superconductivity above 200 K in addition to sulfur hydride & rare-earth hydride system. The materials are synthesized at the synergetic conditions of 160~190 GPa and ~2000 K using diamond anvil cell combined with in-situ laser heating technique. The superconductivity was studied through in-situ high pressure electric conductance measurements in an applied magnetic field for the sample quenched from high temperature while maintained at high pressures. The upper critical field Hc(0) was estimated to be ~268 T while the GL coherent length is ~11 Å. The in-situ synchrotron X-ray diffraction measurements suggest that the synthesized calcium hydrides are primarily composed of CaH 6 while there may also exist other calcium hydrides with different hydrogen contents.
Negative linear compressibility in Se at ultra-high pressure above 120 GPa
A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120 GPa for the first time. Evolved from the rhombohedral (space group R$\bar{3}$m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148 GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5 s. After 140 GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im$\bar{3}$m) was formed, which remains stable up to 210 GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7 GPa, respectively, according to the P–V curve fit by the third-order Birch–Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100 GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.
Correlated High-Pressure Phase Sequence of VO 2 under Strong Compression
Understanding how the structures of a crystal behave under compression is a fundamental issue both for condensed matter physics and for geoscience. Traditional description of a crystal as the stacking of a unit cell with special symmetry has gained much success on the analysis of physical properties. Unfortunately, it is hard to reveal the relationship between the compressed phases. Taking the family of metal dioxides (MO 2 ) as an example, the structural evolution, subject to fixed chemical formula and highly confined space, often appears as a set of random and uncorrelated events. In this work, we provide an alternative way to treat the crystal as the stacking of the coordination polyhedron and then discover a unified structure transition pattern, in our case VO 2 . X-ray diffraction (XRD) experiments and first-principles calculations show that the coordination increase happens only at one apex of the V-centered octahedron in an orderly fashion, leaving the base plane and the other apex topologically intact. The polyhedron evolves toward increasing their sharing, indicating a general rule for the chemical bonds of MO 2 to give away the ionicity in exchange for covalency under pressure.
Local structure of liquid gallium under pressure
In situ high energy X-ray pair distribution function (PDF) measurements, microtomography and reverse Monte Carlo simulations were used to characterize the local structure of liquid gallium up to 1.9 GPa. This pressure range includes the well-known solid-solid phase transition from Ga-I to Ga-II at low temperature. In term of previous research, the local structure of liquid gallium within this domain was suggested a mixture of two local structures, Ga I and Ga II, based on fitting experimental PDF to known crystal structure, with a controversy. However, our result shows a distinctly different result that the local structure of liquid gallium resembles the atomic arrangement of both gallium phase II and III (the high pressure crystalline phase). A melting mechanism is proposed for Ga, in which the atomic structure of phase Ι breaks up at the onset of melting, providing sufficient free volume for atoms to rearrange, to form the melt.
Pressure‐induced polyamorphism in lanthanide‐solute metallic glasses
The electronic structure inheritance of lanthanide‐solvent atoms in lanthanide‐based metallic glasses has been proposed. Is a polyamorphism possible in lanthanide‐solute metallic glasses? So far, polyamorphic phase transitions in metallic glass containing lanthanide have been observed only in lanthanide‐solvent metallic glasses. Here, a pressure‐induced transition between two distinct amorphous states, accompanied by a 7% volume collapse at ambient pressure, was observed in La 43.4 Pr 18.6 Al 14 Cu 24 metallic glass, with low lanthanide content, by using in situ X‐ray total scattering method. The transformation also indicated by changes in short range and medium range order. Thus, it is proposed that the lanthanide‐solute metallic glasses also inherit 4 f electronic transition from pure lanthanide element in polyamorphic transition. This discovery offers a supplement to research on lanthanide‐based metallic glasses, which further provides a new perspective of the polyamorphic transformation in metallic glasses containing lanthanide element.
Polyamorphism in Yb-based metallic glass induced by pressure
The Yb 62.5 Zn 15 Mg 17.5 Cu 5 metallic glass is investigated using synchrotron x-ray total scattering method up to 38.4 GPa. The polyamorphic transformation from low density to high density with a transition region between 14.1 and 25.2 GPa is observed, accompanying with a volume collapse reflected by a discontinuousness of isothermal bulk modulus. This collapse is caused by that distortional icosahedron short range order precedes to perfect icosahedron, which might link to Yb 4f electron delocalization upon compression, and match the result of in situ electrical resistance measurement under high pressure conditions. Furthermore, this discovery in Yb-based metallic glass, combined with the previous reports on other metallic glass systems, demonstrates that pressure induced polyamorphism is the general behavior for typical lanthanide based metallic glasses.
Conventional empirical law reverses in the phase transitions of 122-type iron-based superconductors
Explore the source record for details and available documents.
Study of liquid gallium as a function of pressure and temperature using synchrotron x-ray microtomography and x-ray diffraction
The volume change of liquid and solid gallium has been studied as a function of pressure and temperature up to 3.02 GPa at 300 K and up to 3.63 GPa at 330 K using synchrotron x-ray microtomography combined with energy dispersive x-ray diffraction techniques. Two sets of directly measured P-V data at 300 K and 330 K were obtained from 3D tomography reconstruction data, and the corresponding isothermal bulk moduli were determined as 23.6 (0.5) GPa and 24.6 (0.4) GPa, respectively. The existence of a liquid-liquid phase transition region is proposed based on the abnormal compressibility of Ga melt at about 2.44 GPa and 330 K conditions.
Structural Stability and Compressibility Study for ZnO Nanobelts under High Pressure
The study of nanoscale materials with well-controlled shape could help us to learn more about the morphology effect on phase stability and elastic properties. In situ high-pressure synchrotron angle-dispersive X-ray diffraction for nanobelt and bulk ZnO was measured side-by-side in the same diamond anvil cell at room temperature up to 29 GPa. The pressure-induced wurtzite-type to rocksalt-type structural transition was observed starting at 9.3 GPa for both of these two types of ZnO samples, and no enhanced structural stability for ZnO nanobelts under pressure was found. The relative bigger bulk moduli of wurtzite- and rocksalt-type ZnO nanobelts implicated the morphology effect on its compressibility.
Crystallography at high pressure
No abstract prepared.