Search NASA⌕ Search

Engineering topics

Wang, Lumin

Publications and source records attributed to Wang, Lumin.

51 records · Page 3

Direct handling of sharp interfacial energy for microstructural evolution

In this study, we introduce a simplification to the previously demonstrated hybrid Potts–phase field (hPPF), which relates interfacial energies to microstructural sharp interfaces. The model defines interfacial energy by a Potts-like discrete interface approach of counting unlike neighbors, which we use to compute local curvature. The model is compared to the hPPF by studying interfacial characteristics and grain growth behavior. The models give virtually identical results, while the new model allows the simulator more direct control of interfacial energy.

36 MATERIALS SCIENCE↗

Fission Product Transport in TRISO Particle Layers under Operating and Off-Normal Conditions

The objective of this project is to determine the diffusivity and chemical behavior of key fission products (ag, Cs, I. Te, Eu and Sr) through SiC and PyC both thermally, under irradiation, and under stress using FP introduction techniques that avoid the pitfalls of past experiments. The experimental approach is to create thin PyC-SiC couples containing the fission product to be studied embedded in the PyC layer. These samples will then be subjected to high temperature exposures in a vacuum and also to irradiation at high temperature, and last, to irradiation under stress at high temperature. The PyC serves as a host layer, providing a means of placing the fission product close to the SiC without damaging the SiC layer by its introduction or losing the FP during heating. Experimental measurements of grain boundary structure and distribution (EBSD, HRTEM, APT) will be used in the modeling effort to determine the qualitative dependence of FP diffusion coefficients on grain boundary orientation, temperature and stress.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nanostructure Patterning Under Energetic Particle Beam Irradiation

Energetic ion bombardment can lead to the development of complex and diverse nanostructures on or beneath the material surface through induced self-organization processes. These self-organized structures have received particular interest recently as promising candidates as simple, inexpensive, and large area patterns, whose optical, electronic and magnetic properties are different from those in the bulk materials. Compared to the low mass efficiency production rate of lithographic methods, these self-organized approaches display new routes for the fabrication of nanostructures over large areas in a short processing time at the nanoscale, beyond the limits of lithography. Although it is believed that surface nanostructure formation is based on the morphological instability of the sputtered surface, driven by a kinetic balance between roughening and smoothing actions, the fundamental mechanisms and experimental conditions for the formation of these nanostructures has still not been well established, the formation of the 3-D naopatterns beneath the irradiated surface especially needs more exploration.

42 ENGINEERING↗

Accelerator-Based Irradiation Creep of Pyrolytic Carbon Used in TRISO Fuel Particles for the (VHTR) Very Hight Temperature Reactors

Pyrolytic carbon (PyC) is one of the important structural materials in the TRISO fuel particles which will be used in the next generation of gas-cooled very-high-temperature reactors (VHTR). When the TRISO particles are under irradiation at high temperatures, creep of the PyC layers may cause radial cracking leading to catastrophic particle failure. Therefore, a fundamental understanding of the creep behavior of PyC during irradiation is required to predict the overall fuel performance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effects of dynamic recovery on amorphization kinetics in 6H-SiC

The irradiation-induced amorphization in single crystal 6H-SiC has been previously studied as a function of irradiation temperature for electrons and ions ranging from Ne to Au. Analysis of these data in terms of a dynamic model for amorphization reveals that the amorphization dose increases and critical amorphization temperature decreases as the ratio of in-cascade ionization to displacement rates increases. Model fits to the data yield values for the ratio of radiation-induced cross section to damage cross section and an activation energy of 0.12 ± 0.01 eV for irradiation-induced recovery. The critical temperature exhibits a linear dependence on the ln(cross-section ratio), consistent with the model. The results also indicate that damage rate effects associated with thermal recovery may play a role near the critical temperature.

36 MATERIALS SCIENCE↗

Structural and bonding properties of stannate pyrochlores: a density functional theory investigation

First-principle calculations have been completed on a series of Ln2Sn2O7 (Ln= Sm, Gd, Tb, Ho, Er, Lu, Y, La, Pr and Nd) pyrochlores to study the effect of structural geometry and bond-type on the stability of the pyrochlore structure-type. Overlap population analysis showed that the bonds in stannate pyrochlores are much more covalent than the bonds, and a nonlinear relationship is observed between the or bond lengths and the Ln cation radii. The bonds are the most ionic among the metal-oxygen bonds. These results are consistent with experimental results. We note other factors, in addition to bond-type, that affect the stability of the pyrochlore structure.

36 MATERIALS SCIENCE↗