Effects of a shading band in the data path of an optical drive
A shading band can alter the system transfer function. In our theory and experiment, both contrast improvement and enhanced carrier-to-noise ratio are investigated.
Engineering topics
Publications and source records attributed to Wang, M. S..
A shading band can alter the system transfer function. In our theory and experiment, both contrast improvement and enhanced carrier-to-noise ratio are investigated.
We describe performance of a differential spot-size (wax-wane) focus servo. Crosstalk from the tracks are analyzed in the single detector and differential focus circuits. Magnitude of the crosstalk is reduced by a factor of three in the differential circuit. A false focus-error signal (FES) is present when the spot crosses sector marks at an angle.
A new type of microlens for data storage applications that has improved off-axis performance is described. The lens consists of a micro Fresnel pattern on a curved substrate. The radius of the substrate is equal to the focal length of the lens. If the pattern and substrate are thin, the combination satisfies the Abbe sine condition. Therefore, the lens is free of coma. We analyze a 0.5 numerical aperture, 0.50 mm focal length lens in detail. A 0.16 numerical aperture lens was fabricated holographically, and results are presented.
Czochralski and float zone sigle crystals of silicon were doped with the primary impurities B or P so that a resistivity of 0.5 ohm cm resulted, and in addition doped with certain secondary impurities including Al, C, Cr, Cu, Fe, Mg, Mn, Na, Ni, O, Ti, V, and Zr. The actual presence of these impurities was confirmed by analysis of the crystals. Solar cell performance was evaluated and found to be degraded most significantly by Ti, V, and Zr and to some extent by most of the secondary impurities considered. These results are of significance to the low cost silicon program, since any such process would have to yield at least tolerable levels of these impurities.