Search NASA⌕ Search

Engineering topics

Wang, Ping

Publications and source records attributed to Wang, Ping.

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

An FDA-approved drug structurally and phenotypically corrects the K210del mutation in genetic cardiomyopathy models

Dilated cardiomyopathy (DCM) due to genetic disorders results in decreased myocardial contractility, leading to high morbidity and mortality rates. There are several therapeutic challenges in treating DCM, including poor understanding of the underlying mechanism of impaired myocardial contractility and the difficulty of developing targeted therapies to reverse mutation-specific pathologies. In this report, we focused on K210del, a DCM-causing mutation, due to 3-nucleotide deletion of sarcomeric troponin T (TnnT), resulting in loss of Lysine210. We resolved the crystal structure of the troponin complex carrying the K210del mutation. K210del induced an allosteric shift in the troponin complex resulting in distortion of activation Ca 2+ -binding domain of troponin C (TnnC) at S69, resulting in calcium discoordination. Next, we adopted a structure-based drug repurposing approach to identify bisphosphonate risedronate as a potential structural corrector for the mutant troponin complex. Cocrystallization of risedronate with the mutant troponin complex restored the normal configuration of S69 and calcium coordination. Risedronate normalized force generation in K210del patient-induced pluripotent stem cell–derived (iPSC-derived) cardiomyocytes and improved calcium sensitivity in skinned papillary muscles isolated from K210del mice. Systemic administration of risedronate to K210del mice normalized left ventricular ejection fraction. Collectively, these results identify the structural basis for decreased calcium sensitivity in K210del and highlight structural and phenotypic correction as a potential therapeutic strategy in genetic cardiomyopathies.

Research & Experimental Medicine↗
DOE OSTI2024

Magnetoelectric Coupling in a Mn 4 Na–Organic Complex under Pulsed Magnetic Fields up to 73 T

Research on the magnetoelectric (ME) effect (or spin-electric coupling) in molecule-based magnetic materials is a relatively nascent but promising topic. Molecule-based magnetic materials have diverse magnetic functionalities that can be coupled to electrical properties. Here, in this study, we investigate a realization of ME coupling that is fundamental but not heavily studied─the coupling of magnetic spin level crossings to changes in electric polarization. A mixed-valence Mn 4 Na complex with a total ground-state spin S = 5/2 under zero magnetic field and S = 17/2 under high magnetic field undergoes a cascade of ground-state level crossings of the S z states with increasing magnetic field. Magnetization and electrical polarization measurements under pulsed magnetic fields up to 73 T show that each spin level crossing is accompanied by a significant change in electric polarization that is an even function of the applied magnetic field. A molecular Hamiltonian describing antiferromagnetic exchange in a distorted tetrahedron of three Mn III and one Mn II ions matches the data well. We conclude that the ME coupling is caused by magnetostriction within the polar molecule as it distorts to lower its magnetic exchange energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Co-gasification of Plastic, Coal Waste and Biomass for Hydrogen Rich Syngas Production

Plastic waste has increasingly become one of the most pressing environmental issues. To mitigate plastic emissions, extraordinary efforts are needed for plastic waste recycling and management. This study investigates the co-gasification of plastic, coal refuse, and biomass into hydrogen-rich syngas through steam gasification. The study focuses on the correlations between process parameters and feedstock composition. Coal refuse and biomass are used as co-feedstocks for gasification, aiming to improve the handling of plastic waste and investigating their synergistic effects on product distribution.

Bashir, Muhammad↗
DOE OSTI2024

Development of Manganese and Iron Mixed Metal Oxides for Thermochemical Energy Storage

Energy storage plays an essential role for sustainable and renewable energy use in an effort to reduce carbon emissions. Thermochemical energy storage (TCES) is a favorable alternative to fossil fuel energy systems and a promising solution to the intermittency problem of renewable energy sources (such as solar energy). TCES stores energy in the form of chemical bonds using reversible redox reactions (such as manganese metal oxides). This study developed manganese oxide (Mn2O3) and iron oxide (Fe2O3) with an inert dispersant of silicon dioxide (SiO2) (Mn-Fe-Si) for potential large scale energy storage application. These metal oxides are nontoxic, cheap, and relatively abundant. The materials were prepared with varying metal oxide content using physical mixing in a ball mill, pressure pelletization and calcination at different temperatures. Redox cycle tests were conducted using differential scanning calorimetry combined with thermogravimetric analysis (TGA-DSC). The Mn-Fe-Si materials had higher cyclability and energy release compared to the pure metal oxides and manganese oxide with SiO2. The calcination temperature had a significant effect on releasable energy due to the interactions between the oxides. The Mn-Fe-Si mixture calcined at high temperature (1000oC) showed the highest average energy storage density.

Wilkinson, Olivia↗
DOE OSTI2024

Atomic-scale visualization of defect-induced localized vibrations in GaN

Phonon engineering is crucial for thermal management in GaN-based power devices, where phonon-defect interactions limit performance. However, detecting nanoscale phonon transport constrained by III-nitride defects is challenging due to limited spatial resolution. Here, we used advanced scanning transmission electron microscopy and electron energy loss spectroscopy to examine vibrational modes in a prismatic stacking fault in GaN. By comparing experimental results with ab initio calculations, we identified three types of defect-derived modes: localized defect modes, a confined bulk mode, and a fully extended mode. Additionally, the PSF exhibits a smaller phonon energy gap and lower acoustic sound speeds than defect-free GaN, suggesting reduced thermal conductivity. Our study elucidates the vibrational behavior of a GaN defect via advanced characterization methods and highlights properties that may affect thermal behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and characterization of zeolite sorbents from coal fly ash by a microwave-assisted hydrothermal method for removal of boron leachate from coal impoundments

This study developed promoted zeolite-based sorbents derived from coal fly ash to remove leachates (like boron) from ash impoundment or landfill to protect the environment and reuse legacy coal ash. The sorbents were synthesized using machine learning model results as guide to accelerate the sorbent development.

Wang, Ping↗
DOE OSTI2024

From Plastic Waste to Fuel: Pyrolysis and Gasification of Polyethylene for Hydrogen Production

Thermochemical conversion processes offer promising solutions to address the plastic pollution crisis by transforming plastic waste into valuable products, notably hydrogen. In this study, thermal pyrolysis and steam gasification of polyethylene (PE), the most abundantly produced plastic waste, are investigated in a drop tube reactor system. Various process parameters, namely temperature, residence time, and feedstock composition, are evaluated to establish their correlations with reaction performance. Coal refuse, obtained from discarded thickener underflow in coal processing, is introduced as a co-feedstock for gasification to enhance PE handling and examine synergistic effects on product distribution, particularly H2 yield and syngas quality. Furthermore, the potential of low-cost, environmentally friendly catalysts (i.e., iron oxides, coal ash) for tar reforming is explored.

Natesakhawat, Sittichai↗
DOE OSTI2024

Unraveling the Pyrolytic Behavior and Kinetics of Single Polymers and Plastic-Rich Municipal Solid Waste Using Thermal Analysis

Pyrolysis is a highly promising thermochemical recycling technology for converting heterogenous plastic waste into sustainable fuels in a single step. Therefore, understanding the pyrolysis mechanism is essential for enabling rational reactor design and enhancing efficient recycling techniques. In this study, the thermal degradation behaviors and corresponding kinetics of pure polymers (PE, PP, and PET) and plastic-rich MSW were examined using simultaneous thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Experiments were carried out in the temperature range of 30-800°C with variable heating rates from 5°C/min to 20°C/min in an ultra-high purity Argon atmosphere. Our results indicated that the plastic pyrolysis was an endothermic process, with varying decomposition temperature ranges depending on their structure and composition. Various iso-conversional model-free methods (Friedman, Flynn-Wall-Ozawa, Starink, and Kissinger-Akahira-Sunose) were utilized to determine the apparent activation energy of the plastic degradation, which increased in the following order: PET (214 kJ/mol), PP (218 kJ/mol), PE (245 kJ/mol), and MSW (249 kJ/mol). Finally, Criado’s master plots were employed to identify the best-fitting reaction model and the pre-exponential factor was subsequently determined.

Bashir, Muhammad Aamir↗
NASA NTRS1997

An X-Ray Analysis Database of Photoionization Cross Sections Including Variable Ionization

Results of research efforts in the following areas are discussed: review of the major theoretical and experimental data of subshell photoionization cross sections and ionization edges of atomic ions to assess the accuracy of the data, and to compile the most reliable of these data in our own database; detailed atomic physics calculations to complement the database for all ions of 17 cosmically abundant elements; reconciling the data from various sources and our own calculations; and fitting cross sections with functional approximations and incorporating these functions into a compact computer code.Also, efforts included adapting an ionization equilibrium code, tabulating results, and incorporating them into the overall program and testing the code (both ionization equilibrium and opacity codes) with existing observational data. The background and scientific applications of this work are discussed. Atomic physics cross section models and calculations are described. Calculation results are compared with available experimental data and other theoretical data. The functional approximations used for fitting cross sections are outlined and applications of the database are discussed.

Wang, Ping↗