Search NASA⌕ Search

Engineering topics

Wang, S. J.

Publications and source records attributed to Wang, S. J..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Overview of the KSTAR experiments toward fusion reactor

The Korean Superconducting Tokamak Advanced Research has been focused on exploring the key physics and engineering issues for future fusion reactors by demonstrating the long pulse operation of high beta steady-state discharge. Advanced scenarios are being developed with the goal for steady-state operation, and significant progress has been made in high ℓ i , hybrid and high beta scenarios with β N of 3. In the new operation scenario called fast ion regulated enhanced (FIRE), fast ions play an essential role in confinement enhancement. GK simulations show a significant reduction of the thermal energy flux when the thermal ion fraction decreases and the main ion density gradient is reversed by the fast ions in FIRE mode. Optimization of 3D magnetic field techniques, including adaptive control and real-time machine learning control algorithm, enabled long-pulse operation and high-performance ELM-suppressed discharge. Symmetric multiple shattered pellet injections (SPIs) and real-time disruption event characterization and forecasting are being performed to mitigate and avoid the disruptions associated with high-performance, long-pulse ITER-like scenarios. Finally, the near-term research plan will be addressed with the actively cooled tungsten divertor, a major upgrade of the NBI and helicon current drive heating, and transition to a full metallic wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Nuclear charge radii of germanium isotopes around N = 40

Collinear laser spectroscopy measurements were performed on 68−74 Ge isotopes (Z=32) at ISOLDE-CERN, by probing the 4s 2 4p 2 3 P 1 → 4s 2 4p5s 3 P$^{o}_{1}$ atomic transition (269~nm) of germanium. Nuclear charge radii are determined via the measured isotope shifts, revealing a larger local variation than the neighboring isotopic chains. Nuclear density functional theory with the Fayans functionals Fy(Δr,HFB) and Fy(IVP), and the SV-min Skyrme describes the experimental data for the differential charge radii δ⟨r 2 ⟩ and charge radii R c within the theoretical uncertainties. The observed large variation in the charge radii of germanium isotopes is better accounted for by theoretical models incorporating ground state quadrupole correlations. This suggests that the polarization effects due to pairing and deformation contribute to the observed large odd-even staggering in the charge radii of the Ge isotopic chain.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Laser spectroscopy for the study of exotic nuclei

Investigation into the properties and structure of unstable nuclei far from stability is a key avenue of research in modern nuclear physics. These efforts are motivated by the continual observation of unexpected structure phenomena in nuclei with unusual proton-to-neutron ratios. In recent decades, laser spectroscopy techniques have made significant contributions in our understanding of exotic nuclei in different mass regions encompassing almost the entire nuclear chart. This is achieved through determining multiple fundamental properties of nuclear ground and isomeric states, such as nuclear spins, magnetic dipole and electric quadrupole moments and charge radii, via the measurement of hyperfine structures and isotope shifts in the atomic or ionic spectra of the nuclei of interest. These properties offer prominent tests of recently developed state-of-the-art nuclear theory and help to stimulate new developments in improving the many-body methods and nucleon–nucleon interactions at the core of these models. With the aim of exploring more exotic short-lived nuclei located ever closer to the proton and neutron driplines, laser spectroscopy techniques, with their continuous technological developments towards higher resolution and higher sensitivity, are extensively employed at current- and next-generation radioactive ion beam facilities worldwide. Ongoing efforts in parallel promise to improve the availability of these even more exotic species at next-generation facilities. Very recently, an innovative application of laser spectroscopy on molecules containing short-lived nuclei has been demonstrated offering additional opportunities for several fields of research, e.g. fundamental symmetry studies and astrophysics. Here, in this review, the basic nuclear properties measurable with laser spectroscopy will be introduced. How these observables are associated with nuclear structure and nucleon–nucleon interactions will be discussed. Following this, a general overview of different laser spectroscopy methods will be given with particular emphasis on technical advancements reported in recent years. The main focus of this article is to review the numerous highlights that have resulted from studying exotic nuclei in different mass regions with laser spectroscopy techniques since the last edition in this series. Finally, the challenges facing the field in addition to future opportunities will be discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Deformation behavior of nanoscale Al–Al 2 Cu eutectics studied by in situ micropillar compression

We report deformation behavior of nanoscale laser processed Al–Al 2 Cu eutectics at room temperature is characterized through in situ micro-pillar compression testing in a scanning transmission microscope. Interlamellar spacing of Al–Al 2 Cu eutectics varies from hundreds of nanometers to 20 nm. Three different sizes of micro-pillars are fabricated in order to study the deformation behaviors of single colony and multiple colonies, corresponding to the single crystal and polycrystal respectively. For single colonies, lamellar orientations parallel, normal or inclined to the loading direction were tested. The main findings are: 1) the plasticity mechanisms strongly depend on loading orientation: buckling and kinking in the parallel-loaded eutectics, planar sliding along Al–Al 2 Cu lamellar interfaces in the incline-loaded eutectics and localized shearing in the normal-loaded eutectics. 2) the incline-loaded eutectics exhibits the lowest compression flow strength, and the normal-loaded eutectics has the highest compression flow strength. 3) with decreasing inter-lamellar spacing, the strength increases and plasticity is uniformly distributed, as opposed to shear localization. Highest compressive plasticity is observed in polycrystalline eutectics with an ensemble of lamellar orientations with ~20 nm average spacing: 17.9% at flow stress of 1.63 GPa, and degenerate, bimodal morphology: 11.1% at flow stress of 1.36 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Role of microstructure on the actuation fatigue performance of Ni-Rich NiTiHf high temperature shape memory alloys

Here, the focus of the present study was to systematically investigate the influence of microstructure on the actuation fatigue performance of a Ni-rich NiTiHf high temperature shape memory alloy (HTSMA). Different aging heat treatments led to the formation of H-phase nano-precipitates with different sizes and morphology within the matrix, enhancing thermo-mechanical stability and enabling control of transformation temperatures. The actuation fatigue testing of specimens was performed until failure through thermally-induced reversible martensitic transformation under a constant stress (300 MPa) with two distinct upper cycle temperatures (UCT) of 300 °C and 350 °C. Consequently, the specimens heated to 700 °C and furnace cooled to 100 °C in 48 h, with relatively large precipitates, failed at average fatigue life of 15,500 cycles and exhibited 1.0% average actuation strain in the 300 °C UCT experiments, while those aged at 550 °C for 3 h, with the precipitate sizes less than 20 nm, attained an average fatigue life of 10,800 cycles and an actuation strain of 2.5%. Samples with intermediate precipitate sizes after aging at 600 °C for 10 h failed at the shortest average fatigue life of 8,200 cycles with an intermediate average actuation strain of 2.0%. Furthermore, increase in UCT decreased the fatigue life and resulted in larger average actuation strains for all samples. Overall, the current findings constitute the first systematic results demonstrating the microstructure dependence of the evolution of actuation strain, irrecoverable strain, and transformation temperatures during actuation fatigue, and actuation fatigue life of the Ni-rich Ni 50.3 Ti 29.7 Hf 20 HTSMA, demonstrating the importance of controlling the H-phase precipitate size.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Characteristic orientation relationships in nanoscale Al-Al2Cu Eutectic

Highlights: • Nano-scale lamellar Al-Al{sub 2}Cu eutectic was synthesized by laser surface remelting. • Orientation relationship (OR) is {211}{sub Al2Cu}||{111}{sub Al} and <120>{sub Al2Cu}||<110>{sub Al.} • The OR has two variants, I has (001){sub Al2Cu}||{001}{sub Al} and II has (001){sub Al2Cu}||{111}{sub Al.} • Variant I is associated with low energy interfaces. - Abstract: A fully lamellar Al-Al{sub 2}Cu eutectic comprising alternate nano-scale α-Al and θ-Al{sub 2}Cu phases was synthesized through laser surface remelting of a cast Al-32.7 wt% Cu alloy. The orientation relationship between α-Al and θ-Al{sub 2}Cu phases was investigated from Kikuchi patterns obtained using electron backscattered diffraction (EBSD) and t-EBSD techniques. The characteristic orientation relationship (OR), {211}{sub Al2Cu}||{111}{sub Al} and <120>{sub Al2Cu}||<110>{sub Al}, was observed independent of interlamellar spacing. This OR has two variants where, besides the two parallel planes, the variant I exhibits (001){sub Al2Cu}||{001}{sub Al} and the variant II exhibits (001){sub Al2Cu}||{111}{sub Al}. Variant I prevails over variant II in laser-processed α-Al and θ-Al{sub 2}Cu nano-laminates, and atomistic modeling indicates that this is due to the low energy interfaces associated with variant I, i.e., {211}{sub Al2Cu}||{111}{sub Al} or (001){sub Al2Cu}||{001}{sub Al}. A comprehensive understanding of the crystallographic orientation relationships between two phases may help predict or explain the active slip systems in fine-scale Al-Al{sub 2}Cu eutectic and other cubic-tetragonal two-phase materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Modification to the accelerator of the NBI-1B ion source for improving the injection efficiency

Minimizing power loss of a neutral beam imposes modification of the accelerator of the ion source for further improvement of the beam optics. The beam optics can be improved by focusing beamlets. The injection efficiencies by the steering of ion beamlets are investigated numerically to find the optimum modification of the accelerator design of the NBI-1B ion source. The beam power loss was reduced by aperture displacement of three edge beamlets arrays considering power loadings on the beamline components. Successful testing and operation of the ion source at 60 keV/84% of injection efficiency led to the possibility of enhancing the system capability to a 2.4 MW power level at 100 keV/1.9 μP.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1992

Control and dynamics of an anti-friction levitation system

A novel anti-friction levitator concept has been devised and analytically evaluated to overcome support bearing friction and thereby minimize the structural damping of the Large Spacecraft Control Laboratory (LSCL) experiment structure at JPL. A dynamic model and controller design have been developed for the new levitation system. Simulation results show excellent system performance even when the system is subjected to significant measurement noise and hardware saturation effects.

Ih, C.-H. C.↗
NASA NTRS1991

An introduction to autonomous control systems

The functions, characteristics, and benefits of autonomous control are outlined. An autonomous control functional architecture for future space vehicles that incorporates the concepts and characteristics described is presented. The controller is hierarchical, with an execution level (the lowest level), coordination level (middle level), and management and organization level (highest level). The general characteristics of the overall architecture, including those of the three levels, are explained, and an example to illustrate their functions is given. Mathematical models for autonomous systems, including 'logical' discrete event system models, are discussed. An approach to the quantitative, systematic modeling, analysis, and design of autonomous controllers is also discussed. It is a hybrid approach since it uses conventional analysis techniques based on difference and differential equations and new techniques for the analysis of the systems described with a symbolic formalism such as finite automata. Some recent results from the areas of planning and expert systems, machine learning, artificial neural networks, and the area restructurable controls are briefly outlined.

Antsaklis, Panos J.↗
NASA NTRS1991

Experimental study of adaptive pointing and tracking for large flexible space structures

This paper describes an experimental study of adaptive pointing and tracking control for flexible spacecraft conducted on a complex ground experiment facility. The algorithm used in this study is based on a multivariable direct model reference adaptive control law. Several experimental validation studies were performed earlier using this algorithm for vibration damping and robust regulation, with excellent results. The current work extends previous studies by addressing the pointing and tracking problem. As is consistent with an adaptive control framework, the plant is assumed to be poorly known to the extent that only system level knowledge of its dynamics is available. Explicit bounds on the steady-state pointing error are derived as functions of the adaptive controller design parameters. It is shown that good tracking performance can be achieved in an experimental setting by adjusting adaptive controller design weightings according to the guidelines indicated by the analytical expressions for the error.

Boussalis, D.↗
NASA NTRS1990

Investigation of adaptive-wall wind tunnels with two measured interfaces

An adaptive wall wind tunnel with two measured interfaces has been studied using two interface static pressure measurements near the tunnel walls. An iterative procedure with static pressure measurements on two interfaces is described. The functional relationships of static pressure on two measured interfaces for the exterior region are presented. The convergence of the selected iterative procedure is proved analytically. The one-step convergence formulae are obtained and validated by the simulation of a numerical wind tunnel. Experimental investigation has been conducted with a two-dimensional airfoil model of NASA 0012 at a supercritical Mach number. The results have indicated that the selected procedure is feasible to speed up the flow convergence to the unconfined condition in applying the one-step convergence formulae.

Lo, C. F.↗
NASA NTRS1990

On dynamics and control of multi-link flexible space manipulators

In this paper dynamics, inverse dynamics, and control problems for multi-link flexible space manipulators are presented. In deriving the flexible manipulator dynamics the following are assumed: flexible deformations are relatively small; angular rates of the links are much smaller than their fundamental frequencies; nonlinear terms (centrifugal and Coriolis forces) in the flexible manipulator model are the same as those in the rigid body model. These assumptions are reasonable for large space manipulators, such as the space crane. Flexible displacements are measured with respect to the rigid body configuration, for which a linear time-varying system is obtained. The inverse dynamics problem consists of determination of joint torques, given tip trajectory, such that joint angles in flexible configuration are equal to the angles in the rigid body configuration. The manipulator control system consists of the feedforward compensation and feedback control loops. Simulation results of a two-link space crane with large payload show that the performance of this linearized dynamics and control approach is reasonable and robust subject to parameter variations during slew operations.

Gawronski, W.↗