Search NASA⌕ Search

Engineering topics

Wang, Wenzhong

Publications and source records attributed to Wang, Wenzhong.

Iron Bonding with Light Elements: Implications for Planetary Cores Beyond the Binary System

Light element alloying in iron is required to explain density deficit and seismic wave velocities in Earth’s core. However, the light element composition of the Earth’s core seems hard to constrain as nearly all light element alloying would reduce the density and sound velocity (elastic moduli). The alloying light elements include oxidizing elements like oxygen and sulfur and reducing elements like hydrogen and carbon, yet their chemical effects in the alloy system are less discussed. Moreover, Fe-X-ray Absorption Near Edge Structure (Fe-XANES) fingerprints have been studied for silicate materials with ferrous and ferric ions, while not many X-ray absorption spectroscopy (XAS) studies have focused on iron alloys, especially at high pressures. To investigate the bonding nature of iron alloys in planetary interiors, we presented X-ray absorption spectroscopy of iron–nitrogen and iron–carbon alloys at high pressures up to 50 GPa. Together with existing literature on iron–carbon, –hydrogen alloys, we analyzed their edge positions and found no significant difference in the degree of oxidation among these alloys. Pressure effects on edge positions were also found negligible. Our theoretical simulation of the valence state of iron, alloyed with S, C, O, N, and P also showed nearly unchanged behavior under pressures up to 300 GPa. This finding indicates that the high pressure bonding of iron alloyed with light elements closely resembles bonding at the ambient conditions. We suggest that the chemical properties of light elements constrain which ones can coexist within iron alloys.

Advanced Photon Source↗

Chalcogen isotopes reveal limited volatile contribution from late veneer to Earth

The origin of Earth’s volatile elements is highly debated. Comparing the chalcogen isotope ratios in the bulk silicate Earth (BSE) to those of its possible building blocks, chondritic meteorites, allows constraints on the origin of Earth’s volatiles; however, these comparisons are complicated by potential isotopic fractionation during protoplanetary differentiation, which largely remains poorly understood. Using first-principles calculations, we find that core-mantle differentiation does not notably fractionate selenium and tellurium isotopes, while equilibrium evaporation from early planetesimals would enrich selenium and tellurium in heavy isotopes in the BSE. The sulfur, selenium, and tellurium isotopic signatures of the BSE reveal that protoplanetary differentiation plays a key role in establishing most of Earth’s volatile elements, and a late veneer does not substantially contribute to the BSE’s volatile inventory.

58 GEOSCIENCES↗

Coupled deep-mantle carbon-water cycle: Evidence from lower-mantle diamonds

Diamonds form in a variety of environments between subducted crust, lithospheric and deep mantle. Recently, deep source diamonds with inclusions of the high-pressure H 2 O-phase ice-VII were discovered. By correlating the pressures of ice-VII inclusions with those of other high-pressure inclusions, we assess quantitatively the pressures and temperatures of their entrapment. We show that the ice-VII-bearing diamonds formed at depths down to 800 ± 60 km but at temperatures 200–500 K below average mantle temperature that match the pressure-temperature conditions of decomposing dense hydrous mantle silicates. Furthermore, our work presents strong evidence for coupled recycling of water and carbon in the deep mantle based on natural samples.

58 GEOSCIENCES↗

A melting-like process and the local structures during the anatase-to-rutile transition

Highlights: • The maximum size of anatase crystallites is more useful to describe the phase stability than the traditional critical size. • The melting-like process accelerates the phase transition from anatase to rutile. • The cis-coordinated anatase is transformed to trans-coordinated rutile by torsion & rotation of TiO{sub 6} octahedra in anatase. Phase transition of titanium oxide from anatase to rutile was investigated by using transmitted electron microscope (TEM), scanning electron microscope (SEM) and X-ray diffraction (XRD), in combination with the atomic pair distribution function (PDF) technique. The transition range is about 528–805 °C and the critical size is ~73 nm for the sol-gel samples calcined for 6 h. A melting-like process was evidently observed in the transition samples by SEM and it will speed up the phase transition. PDF reveals that anatase crystallites are packed by neighbouring TiO{sub 6} octahedra in a cis-coordinated way. Anatase crystallites larger than the critical size will be unstable and transform into rutile in a trans-coordinated way by torsion and rotation of part of octahedra and it will rapidly spread the entire crystallites driven by a melting-like process. We suggest the maximum size of anatase will be more technically useful for the description of the phase stability from anatase to rutile because unstable small anatase crystals are consumed during longer calcination process to grow the larger anatase crystals.

36 MATERIALS SCIENCE↗

Hydrogen-bearing iron peroxide and the origin of ultralow-velocity zones

Ultralow-velocity zones (ULVZs) at Earth’s core–mantle boundary region have important implications for the chemical composition and thermal structure of our planet, but their origin has long been debated. Hydrogen-bearing iron peroxide (FeO 2 H x ) in the pyrite-type crystal structure was recently found to be stable under the conditions of the lowermost mantle. Using high-pressure experiments and theoretical calculations, we find that iron peroxide with a varying amount of hydrogen has a high density and high Poisson ratio as well as extremely low sound velocities consistent with ULVZs. Here in this paper we also report a reaction between iron and water at 86 gigapascals and 2,200 kelvin that produces FeO 2 H x . This would provide a mechanism for generating the observed volume occupied by ULVZs through the reaction of about one-tenth the mass of Earth’s ocean water in subducted hydrous minerals with the effectively unlimited reservoir of iron in Earth’s core. Unlike other candidates for the composition of ULVZs, FeO 2 H x synthesized from the superoxidation of iron by water would not require an extra transportation mechanism to migrate to the core–mantle boundary. These dense FeO2Hx-rich domains would be expected to form directly in the core–mantle boundary region and their properties would provide an explanation for the many enigmatic seismic features that are observed in ULVZs

58 GEOSCIENCES↗

NaYF{sub 4}:Er,Yb/Bi{sub 2}MoO{sub 6} core/shell nanocomposite: A highly efficient visible-light-driven photocatalyst utilizing upconversion

Highlights: • Design and synthesis of NaYF{sub 4}:Er,Yb/Bi{sub 2}MoO{sub 6} based on upconversion. • NaYF{sub 4}:Er,Yb/Bi{sub 2}MoO{sub 6} nanocomposite was prepared for the first time. • Core–shell structure benefits the properties. • Upconversion contributed to the enhanced photocatalytic activity. • Helps to understand the functionality of new type photocatalysts. - Abstract: NaYF{sub 4}:Er,Yb/Bi{sub 2}MoO{sub 6} core/shell nanocomposite was designed and prepared for the first time based on upconversion. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution TEM (HRTEM), energy dispersive X-ray spectroscopy (EDS) and diffuse reflectance spectra (DRS). The results revealed that the as-synthesized NaYF{sub 4}:Er,Yb/Bi{sub 2}MoO{sub 6} consisted of spheres with a core diameter of about 26 nm and a shell diameter of around 6 nm. The core was upconversion illuminant NaYF{sub 4}:Er,Yb and the shell was Bi{sub 2}MoO{sub 6} around the core, which was confirmed by EDS. The NaYF{sub 4}:Er,Yb/Bi{sub 2}MoO{sub 6} exhibited higher photocatalytic activity for the photodecomposition of Rhodamine B (RhB) under the irradiation of Xe lamp and green light emitting diode (g-LED). The mechanism of the high photocatalytic activity was discussed by photoluminescence spectra (PL), which is mainly attributed to upconversion of NaYF{sub 4}:Er,Yb in the NaYF{sub 4}:Er,Yb/Bi{sub 2}MoO{sub 6} nanocomposite and the core–shell structure.

36 MATERIALS SCIENCE↗

Facile preparation and improved photocatalytic H{sub 2}-production of Pt-decorated CdS/TiO{sub 2} nanorods

Graphical abstract: - Highlights: • Pt-CdS/TiO{sub 2} nanorods were firstly realized by electrospinning. • They exhibited high photocatalytic H{sub 2} production activity. • The mechanism of the high performance was discussed. - Abstract: Pt-CdS/TiO{sub 2} nanorods with different molar ratios of Cd:Ti were prepared through an electrospinning method followed by sulfidation treatment and photodeposition. The nanorod-like samples were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), photoluminescence spectra (PL), and UV–vis diffuse reflectance spectroscopy (DRS). The results indicated that the as-prepared samples exhibited wider light absorption range and lower recombination rate of photogenerated electron–hole pairs after the introduction of Pt and CdS. The photocatalysis experiments showed that Pt-modified CdS/TiO{sub 2} nanorods exhibited much higher activities than pure TiO{sub 2} in the evolution of hydrogen under simulated solar light irradiation.

36 MATERIALS SCIENCE↗

Electrospun nanofibers of Er{sup 3+}-doped TiO{sub 2} with photocatalytic activity beyond the absorption edge

Er{sup 3+}-doped TiO{sub 2} nanofibers with different Er{sup 3+} contents were prepared via electrospinning and characterized by X-ray diffraction, scanning electron microscopy, ultraviolet–visible diffuse reflectance spectroscopy and photocurrent measurement. Photocatalytic activities of the as-prepared samples were evaluated by the decolorization of methyl orange aqueous solution under simulated solar light irradiation. The results indicated that the photocatalytic activity of Er{sup 3+}-doped TiO{sub 2} nanofibers was much higher than that of the undoped one, and the optimal dosage of Er{sup 3+} at 1 mol% achieved the highest degradation rate. Moreover, the photocatalytic activity of Er{sup 3+}-doped TiO{sub 2} nanofibers under the irradiation of light with the wavelength beyond the absorption edge of TiO{sub 2} was explored by the decolorization of a dye, rhodamine B and the photodegradation of a typical colorless pollutant, phenol. The results further revealed the mechanism of the enhanced photocatalytic activity through Er{sup 3+} doping in TiO{sub 2} nanofibers. - Graphical abstract: Display Omitted - Highlights: ●Er{sup 3+}:TiO{sub 2} nanofibers with different Er{sup 3+} contents were prepared via electrospinning. ●The photocatalytic activity of Er{sup 3+}:TiO{sub 2} was much higher than that of undoped one. ●Er{sup 3+}:TiO{sub 2} could be activated by the light with wavelength beyond the absorption edge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene electron cannon: High-current edge emission from aligned graphene sheets

High-current field emitters are made by graphene paper consist of aligned graphene sheets. Field emission luminance pattern shows that their electron beams can be controlled by rolling the graphene paper from sheet to cylinder. These specific electron beams would be useful to vacuum devices and electron beam lithograph. To get high-current emission, the graphene paper is rolled to array and form graphene cannon. Due to aligned emission array, graphene cannon have high emission current. Besides high emission current, the graphene cannon is also tolerable with excellent emission stability. With good field emission properties, these aligned graphene emitters bring application insight.

36 MATERIALS SCIENCE↗

The photocatalysis of Bi{sub 2}MoO{sub 6} under the irradiation of blue LED

Graphical abstract: - Highlights: • ·OH trap and hole sink were involved to investigate the active radicals. • Holes play a more important role in the degradation of RhB. • The ·OH were related to the decomposition of phenol. • The ·O{sub 2}-played a leading role in the photodegradation of phenol. • Blue LED is competitive and promising alternative for the future application. - Abstract: Bi{sub 2}MoO{sub 6} has been reported as a promising photocatalyst in wastewater treatment. The active radicals generated over the Bi{sub 2}MoO{sub 6} during the photocatalytic process were thought to be hydroxyl radical (·OH) but have not been proved. Herein, Bi{sub 2}MoO{sub 6} with nanoplate like morphology was synthesized and its photocatalytic performances in the degradation of rhodamine B (RhB) and phenol as colored and colorless model pollutants respectively were evaluated under the irradiation of blue light emitting diode (LED). The tert-butyl alcohol (TBA) as a ·OH trap and ethylene diamine tetraacetic acid (EDTA) as a hole sink were involved to investigate the main active groups that are generated on Bi{sub 2}MoO{sub 6} and function during the photodegradation of RhB and phenol. In addition, it is a competitive and promising alternative plan to use blue LED as light source for the future practical application in environmental remediation.

36 MATERIALS SCIENCE↗

Metal-doped semiconductor nanoparticles and methods of synthesis thereof

The present invention generally relates to binary or higher order semiconductor nanoparticles doped with a metallic element, and thermoelectric compositions incorporating such nanoparticles. In one aspect, the present invention provides a thermoelectric composition comprising a plurality of nanoparticles each of which includes an alloy matrix formed of a Group IV element and Group VI element and a metallic dopant distributed within the matrix.

Ren, Zhifeng↗

Metal-doped semiconductor nanoparticles and methods of synthesis thereof

The present invention generally relates to binary or higher order semiconductor nanoparticles doped with a metallic element, and thermoelectric compositions incorporating such nanoparticles. In one aspect, the present invention provides a thermoelectric composition comprising a plurality of nanoparticles each of which includes an alloy matrix formed of a Group IV element and Group VI element and a metallic dopant distributed within the matrix.

36 MATERIALS SCIENCE↗

Methods for synthesis of semiconductor nanocrystals and thermoelectric compositions

The present invention provides methods for synthesis of IV VI nanostructures, and thermoelectric compositions formed of such structures. In one aspect, the method includes forming a solution of a Group IV reagent, a Group VI reagent and a surfactant. A reducing agent can be added to the solution, and the resultant solution can be maintained at an elevated temperature, e.g., in a range of about 20.degree. C. to about 360.degree. C., for a duration sufficient for generating nanoparticles as binary alloys of the IV VI elements.

Ren, Zhifeng↗