Search NASA⌕ Search

Engineering topics

Wang, Xiaoping

Publications and source records attributed to Wang, Xiaoping.

At least 37 records · Page 2

Layered Semiconductor Cr 0.32 Ga 0.68 Te 2.33 with Concurrent Broken Inversion Symmetry and Ferromagnetism: A Bulk Ferrovalley Material Candidate

The valleytronic state found in group-VI transition-metal dichalcogenides such as MoS2 has attracted immense interest since its valley degree of freedom could be used as an information carrier. However, valleytronic applications require spontaneous valley polarization. Such an electronic state is predicted to be accessible in a new ferroic family of materials, i.e., ferrovalley materials, which features the coexistence of spontaneous spin and valley polarization. Although many atomic monolayer materials with hexagonal lattices have been predicted to be ferrovalley materials, no bulk ferrovalley material candidates have been reported or proposed. Here, in this work, we show that a new non-centrosymmetric van der Waals (vdW) semiconductor Cr 0.32 Ga 0.68 Te 2.33 , with intrinsic ferromagnetism, is a possible candidate for bulk ferrovalley material. This material exhibits several remarkable characteristics: (i) it forms a natural heterostructure between vdW gaps, a quasi-two-dimensional (2D) semiconducting Te layer with a honeycomb lattice stacked on the 2D ferromagnetic slab comprised of the (Cr, Ga)-Te layers, and (ii) the 2D Te honeycomb lattice yields a valley-like electronic structure near the Fermi level, which, in combination with inversion symmetry breaking, ferromagnetism, and strong spin-orbit coupling contributed by heavy Te element, creates a possible bulk spin-valley locked electronic state with valley polarization as suggested by our DFT calculations. Further, this material can also be easily exfoliated to 2D atomically thin layers. Therefore, this material offers a unique platform to explore the physics of valleytronic states with spontaneous spin and valley polarization in both bulk and 2D atomic crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iron redox behavior and oxygen reduction activity of Fe-N-C electrocatalysts in different electrolytes

The iron redox behavior and oxygen reduction reaction (ORR) activity of Fe-N-C ORR electrocatalysts synthesized by a variety of techniques were investigated as a function of the identity of the electrolyte anion (bisulfate/sulfate or perchlorate) at a constant pH. In situ X-ray absorption spectroscopy data support the assignment of the redox peaks in the voltammograms to the Fe 3+ /Fe 2+ redox couple. It was found that for a given Fe-N-C catalyst, there is a correlation between the Fe redox couple peak potential and the ORR activity in perchloric acid electrolyte, but not in sulfuric acid electrolyte. While a higher Fe redox couple potential (≥ 110 mV higher) was observed in perchloric acid electrolyte, a higher ORR activity was obtained in sulfuric acid electrolyte. Here, the higher ORR activity observed in sulfuric acid than perchloric acid was correlated with the higher peak current and larger faradaic charge for the Fe redox couple. A study of the Fe redox behavior using a cavity microelectrode, eliminating the impact of ionomer, showed that the interaction of H 2 SO 4 with Fe-N-C is stronger than that of HClO 4 and that Fe redox in both electrolytes is a reversible surface electrochemical reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adaptive learning-driven high-throughput synthesis of oxygen reduction reaction Fe–N–C electrocatalysts

Reducing human reliance on inefficient energy systems and fossil fuels has become more urgent due to the consequences of global climate change. However, traditional trial-and-error approaches have hampered our ability to accelerate the discovery and implementation of functional materials for efficient energy conversion devices, such as polymer electrolyte fuel cells (PEFCs). To address this, we develop an adaptive learning framework that integrates machine learning and state-of-the-art capabilities in high-throughput synthesis to achieve expedited optimization of iron-nitrogen-carbon PEFC oxygen reduction reaction (ORR) electrocatalysts. We use statistical inference, uncertainty quantification, and global optimization to build a computational design-of-experiment tool that identifies the optimum compositions to be investigated next to reduce the demands placed on experimental materials discovery. We benchmark the ability of the proposed strategy to discover optimum catalyst synthesis conditions in a six-dimensional search space when starting with a thirty-six-sample database. By following the adaptive learning strategy, we synthesize fourteen new catalysts from approximately ten billion unique compositions and discover four catalysts that outperform all original samples. The best machine learning-optimized catalyst is 33% more active than the highest-performing one in the initial database, showing an ORR activity seven times larger than those typically reported for the same class of materials.

36 MATERIALS SCIENCE↗

Enhancing the activity of Fe-N-C oxygen reduction reaction electrocatalysts by high-throughput exploration of synthesis parameters

Here, the most active class of platinum group metal-free (PGM-free) oxygen reduction reaction (ORR) electrocatalysts in acidic electrolytes are those synthesized by heat treatment of iron, carbon, nitrogen precursors (Fe-N-C). Due to the large number of possible precursor compounds, a small fraction of the synthesis variable space has been explored. Correlation of synthesis variables with Fe speciation and ORR activity has been limited. In this work, an automation platform and a multi-port ball-milling were utilized to evaluate the effects of synthesis variables, such as identity of iron precursor, iron loading, and carbon and nitrogen sources on the ORR activity of iron -nitrogen-carbon catalysts in acidic electrolyte. The ORR activity is correlated with catalyst Fe speciation determined using Fe K-edge X-ray absorption spectroscopy (XAFS).

30 DIRECT ENERGY CONVERSION↗

Unusual Changes of C−H Bond Lengths in Chiral Zinc Complexes Induced by Noncovalent Interactions

In order to better understand the effect of non-covalent weak interactions on molecules, we have explored a variety of weak interactions, such as improper H-bonding (HB), tetrel bonds (TBs) and halogen bonds, in fluorinated chiral zinc complexes. High resolution neutron diffraction studies revealed a methylene carbon-hydrogen bond elongation and shortening due to TB and improper HB interactions, respectively. To show the accumulative effects of multiple weak interactions on the C-H bond, three types of tetrel bonds have been carefully examined. We have also shown how C-H bond elongation can be easily offset by forming an improper HB with the H atom from this C-H bond. Non-covalent interaction and electrostatic potential analysis investigations have been used to affirm the nature of the interactions based on density functional theory (DFT) and other related calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enable High-Energy LiNi0.5Co0.2Mn0.3O2 by Ultra-Thin Coating through Wet Impregnation

A high cut-off voltage is required for nickel-rich layered oxide LiNixCoyMnzO2 (NCM) to meet the high energy density requirement of lithium-ion batteries in electric vehicles. However, such a high voltage application leads to an unstable interface between NCM and liquid electrolytes. To stabilize the interface, the facile wet impregnation method has been developed to apply an ultra-thin Al2O3 coating layer on the NCM particles. This coating layer was found to have a strong interaction with the NCM and resulted in Al-doped NCM at the surface structure of NCM. The change of surface structure can not only reduce the surface resistance of lithium diffusion of LiNi0.5Co0.2Mn0.3O2 (NCM523), but also stabilize the solid electrolyte interface between NCM523 and the electrolyte with the cut-off voltage of 4.5 V vs. Li/Li+. Compared to other coating methods, wet impregnation coating can provide an ultra-thin and uniform coating with surface doping on NCM particles. Furthermore, this scalable coating method can be applied to various electrode materials without adding much additional cost.

25 ENERGY STORAGE↗

Canted antiferromagnetic phases in the candidate layered Weyl material EuMnSb 2

EuMnSb 2 is a candidate topological material which can be tuned towards a Weyl semimetal, but there are differing reports for its antiferromagnetic (AFM) phases. The coupling of bands dominated by pure Sb layers hosting topological fermions to Mn and Eu magnetic states provides a potential path to tune the topological properties. In this study we present single-crystal neutron diffraction, magnetization, and heat-capacity data as well as polycrystalline 151 Eu Mössbauer data which show that three AFM phases exist as a function of temperature, and we present a detailed analysis of the magnetic structure in each phase. The Mn magnetic sublattice orders into a C-type AFM structure below T N Mn = 323 (1) K with the ordered Mn magnetic moment μ Mn lying perpendicular to the layers. AFM ordering of the Eu sublattice occurs below T N Eu1 = 23 (1) K with the ordered Eu magnetic moment μ Eu canted away from the layer normal and μ Mn retaining its higher temperature order. μ Eu is ferromagnetically aligned within each Eu layer but exhibits a complicated AFM layer stacking. Both of these higher-temperature phases are described by magnetic space group (MSG) $\mathcal{Pn'm'a'}$ with the chemical and magnetic unit cells having the same dimensions. Cooling below T N Eu2 =9 (1) K reveals a third AFM phase where μ Mn remains unchanged but μ Eu develops an additional substantial in-plane canting. This phase has MSG $\mathcal{P11}$ $\frac{2_1}{a′}$. We also find some evidence of short-range magnetic correlations associated with the Eu between 12 K≲ T≲ 30 K . Using the determined magnetic structures, we postulate the signs of nearest-neighbor intralayer and interlayer exchange constants and the magnetic anisotropy within a general Heisenberg model. We then discuss implications of the various AFM states in EuMnSb 2 and their potential for tuning topological properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic magnon damping by zero-temperature quantum fluctuations in ferromagnetic CrGeTe 3

Spin and lattice are two fundamental degrees of freedom in a solid, and their fluctuations about the equilibrium values in a magnetic ordered crystalline lattice form quasiparticles termed magnons (spin waves) and phonons (lattice waves), respectively. In most materials with strong spin-lattice coupling (SLC), the interaction of spin and lattice induces energy gaps in the spin wave dispersion at the nominal intersections of magnon and phonon modes. Here we use neutron scattering to show that in the two-dimensional (2D) van der Waals honeycomb lattice ferromagnetic CrGeTe 3 , spin waves propagating within the 2D plane exhibit an anomalous dispersion, damping, and breakdown of quasiparticle conservation, while magnons along the c axis behave as expected for a local moment ferromagnet. These results indicate the presence of dynamical SLC arising from the zero-temperature quantum fluctuations in CrGeTe 3 , suggesting that the observed in-plane spin waves are mixed spin and lattice quasiparticles fundamentally different from pure magnons and phonons.

36 MATERIALS SCIENCE↗

Spin Waves and Magnetic Exchange Hamiltonian in CrSBr

Abstract CrSBr is an air‐stable two‐dimensional (2D) van der Waals semiconducting magnet with great technological promise, but its atomic‐scale magnetic interactions—crucial information for high‐frequency switching—are poorly understood. An experimental study is presented to determine the CrSBr magnetic exchange Hamiltonian and bulk magnon spectrum. The A ‐type antiferromagnetic order using single crystal neutron diffraction is confirmed here. The magnon dispersions are also measured using inelastic neutron scattering and rigorously fit the excitation modes to a spin wave model. The magnon spectrum is well described by an intra‐plane ferromagnetic Heisenberg exchange model with seven nearest in‐plane exchanges. This fitted exchange Hamiltonian enables theoretical predictions of CrSBr behavior: as one example, the fitted Hamiltonian is used to predict the presence of chiral magnon edge modes with a spin‐orbit enhanced CrSBr heterostructure.

2D materials↗

Cathode active materials for lithium-ion batteries

Compounds, powders, and cathode active materials that can be used in lithium ion batteries are described herein. Methods of making such compounds, powders, and cathode active materials are described.

Dai, Hongli↗

Hydride-Containing Eight-Electron Pt/Ag Superatoms: Structure, Bonding, and Multi-NMR Studies

Recent reports on hydride-doped noble metal nanoclusters strongly suggest that the encapsulated hydride is a part of the superatom core, but no accurate location of the hydride could be experimentally proved, so far. Here, we report herein a hydride-doped eight-electron platinum/silver alloy nanocluster in which the position of four-coordinated hydride was determined by neutron diffraction for the first time. X-ray structures of [PtHAg 19 (dtp/desp) 12 ] (dtp = S 2 P(O n Pr) 2 , 1; dsep = Se 2 P(O i Pr) 2 , 2) describe a central platinum hydride (PtH) unit encapsulated within a distorted Ag 12 icosahedron, the resulting (PtH)@Ag 12 core being stabilized by an outer sphere made up of 7 capping silver atoms and 12 dichalcogenolates. Solid-state structures of 1 and 2 differ somewhat in the spatial configuration of their outer spheres, resulting in overall different symmetries, C 1 and C 3 , respectively. Whereas the multi-NMR spectra of 2 in solution at 173 K reveal that the structure of C 3 symmetry is the predominant one, 1 H and 195 Pt NMR spectra of 1 at the same temperature disclose the presence of isomers of both C 1 and C 3 symmetry. DFT calculations found both isomers to be very close in energy, supporting the fact that they co-exist in solution. They also show that the [PtH@Ag 12 ] 5+ kernel can be viewed as a closed-shell superatomic core, the μ4-hydride electron contributing to its eight-electron count. On the other hand, the 1s(H) orbital contributes only moderately to the superatomic orbitals, being mainly involved in the building of a Pt–H bonding electron pair with the 5d z 2 (Pt) orbital.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insulating antiferromagnetism in VTe

Here, we report a detailed theoretical and experimental study on the vanadium monotelluride VTe, which crystallizes in the NiAs hexagonal structure. First-principles calculations reveal a complex hierarchy of magnetic interactions and energy scales, with the ground state theoretically determined as an ($\frac{1}{2}$, 0, $\frac{1}{2}$) antiferromagnetic ordering with insulating character and a band gap of 0.5 eV. Experimental synthesis and characterization efforts find a substantially off-stoichiometric orthorhombic structure (a defect NiAs structure) with composition V 0.85 Te, and an apparent Néel point of some 45 K. First-principles calculations find good agreement with the observed Néel point. We also give an extended examination of the effects of off-stoichiometry on the calculated energetics, finding significant volume-related effects. Our first-principles calculations find the stoichiometric phase VTe to have a negative vanadium defect formation energy of over 1 eV, thus explaining the formation of the off-stoichiometric phase. Finally, we provide a structural explanation for the formation of defect structures in this and numerous other NiAs-structure materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Importance of Surface Oxygen for Lithiation and Morphology Evolution during Calcination of High-Nickel NMC Cathodes

Nanoscale morphology has a direct impact on the performance of materials for electrochemical energy storage. Despite this importance, little is known about the evolution of primary particle morphology nor its effect on chemical pathways during synthesis. In this work, operando characterization is combined with atomic-scale and continuum simulations to clarify the relationship between morphology of cathode primary particles and their lithiation during calcination of LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC-811). This combined approach reveals a key role for surface oxygen adsorption in facilitating the lithiation reaction by promoting metal diffusion and oxidation, and simultaneously providing surface sites for lithium insertion. Furthermore, oxygen surface termination is shown to increase the activation energy for sintering, leading to smaller primary particle sizes at intermediate temperatures. Smaller particles provide both shorter diffusion lengths for lithium incorporation and increased surface site density for lithium insertion. These insights provide a foundation for more tailored syntheses of cathode materials with optimized performance characteristics.

25 ENERGY STORAGE↗

Role of the third dimension in searching for Majorana fermions in α-RuCl 3 via phonons

Understanding phonons in α-RuCl 3 is critical to analyze the controversy around the observation of the half-integer thermal quantum Hall effect. While many studies have focused on the magnetic excitations in α-RuCl 3 , its vibrational excitation spectrum has remained relatively unexplored. We investigate the phonon structure of α-RuCl 3 via inelastic neutron-scattering experiments and density-functional-theory calculations. Our results show excellent agreement between experiment and first-principles calculations. After validating our theoretical model, we extrapolate the low-energy phonon properties. We find that the phonons in α-RuCl 3 that either propagate or vibrate in the out-of-plane direction have significantly reduced velocities and therefore have the potential to dominate the observability of the elusive half-integer plateaus in the thermal Hall conductance. In addition, we use low-energy interlayer phonons to resolve the low-temperature stacking structure of our large crystal of α-RuCl 3 , which we find to be consistent with that of the R$\bar{3}$ space group, in agreement with neutron diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reactivities of Interstitial Hydrides in a Cu 11 Template: En Route to Bimetallic Clusters

In sharp contrast to surface hydrides, reactivities of interstitial hydrides are difficult to explore. When treated with a metal ion (Cu + , Ag + , and Au + ), the stable CuI dihydride template [Cu 11 H 2 {S 2 P(OiPr) 2 } 6 (C≡CPh) 3 ] (H 2 Cu 11 ) generates surprisingly three very different compounds, namely [CuH 2 Cu 11 {S 2 P(OiPr) 2 } 6 (C≡CPh) 3 ] + (1), [AgH 2 Cu 14 {S 2 P(OiPr) 2 } 6 ((C≡CPh) 6 ] + (2), and [AuCu 11 {S 2 P(OiPr) 2 } 6 (C≡CPh) 3 Cl] (3). Compounds 1 and 2 are both MI species and maintain the same number of hydride ligands as their H 2 Cu 11 precursor. Neutron diffraction revealed the first time a trigonal-pyramidal hydride coordination mode in the AgCu 3 environment of 2. 3 has no hydride and exhibits a mixed-valent [AuCu 11 ] 10+ metal core, making it a two-electron superatom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗