Search NASA⌕ Search

Engineering topics

Wang, Xu

Publications and source records attributed to Wang, Xu.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Search for Solar Boosted Dark Matter Particles at the PandaX-4T Experiment

We present a novel constraint on light dark matter utilizing 1.54 metric ton/year of data acquired from the PandaX-4T dual-phase xenon time projection chamber. This constraint is derived through detecting electronic recoil signals resulting from the interaction with solar-enhanced dark matter flux. Low-mass dark matter particles, lighter than a few MeV / c 2 , can scatter with the thermal electrons in the Sun. Consequently, with higher kinetic energy, the boosted dark matter component becomes detectable via contact scattering with xenon electrons, resulting in a few keV energy deposition that exceeds the threshold of PandaX-4T. We calculate the expected recoil energy in PandaX-4T considering the Sun’s acceleration with heavy mediators and the detection capabilities of the xenon detector. The first experimental search results using the xenon detector yield the most stringent upper limits cross section of 3.51 × 10 − 39 cm 2 at 0.08 MeV / c 2 for a solar boosted dark matter mass ranging from 0.02 to 10 MeV / c 2 , achieving a 23-fold improvement compared with earlier experimental studies. Published by the American Physical Society 2025

Shen, Guofang↗
DOE OSTI2025

Transparent and Conductive Polyimide‐Ionene Hybrid Interlayers for High Performance and Cost‐Effective Semitransparent Organic Solar Cells

The contradiction between high transmittance and favorable conductivity poses a great challenge in developing effective cathode interlayer (CIL) materials with sufficient thickness tolerance, which hinders the further advancement of organic solar cells (OSCs). Herein, a completely new class of alcohol processable polyimide-ionene hybrids (PIIHs) is proposed by melding pyromellitic diimide (PMD) subunits into imidazolium-based ionenes backbone covalently. These PIIHs, named PMD-DI and PMD-PD, boast high transparency, suitable energy levels, and decent conductivity. A higher PMD content endows PMD-PD with improved work function tunability, electrical properties, and crystallinity, enabling PMD-PD as CIL material with excellent thickness-insensitive characteristics, while simultaneously improving device stability significantly. Furthermore, PMD-PD also exhibits good compatibility with various electrodes and active layers, offering solar cell efficiencies of up to 19.91% and 19.29% with Ag and Cu cathodes, respectively. More importantly, the application of PMD-PD can improve the performance of semi-transparent OSCs without losing transmittance, thereby drastically enhancing the light utilization efficiency to 4.04% with an ultrathin, low-cost Cu cathode, that competes with leading optical modulation-free semitransparent OSCs with expensive Ag cathodes. This work opens a pathway to realize transparent and conductive interlayers by strategic molecular design, leading to highly efficient, stable, and cost-effective OSCs suitable for diverse applications.

You, Zuhao↗
DOE OSTI2024

Impact of reactor architecture and design parameters on the performance of microbial electrolysis cells revealed by the electrode potential slope analysis

Microbial electrolysis cells (MECs) are appealing for recovering the chemical energy contained in domestic and industrial liquid wastes as hydrogen gas. Despite several years of research in the field, there is still a lack of critical analysis of how the reactor architecture dictates the electrochemical performance of the cell. In this study, internal resistance and onset voltage from the electrode potential slope analysis (EPS) were used in combination with current density, hydrogen production rate, reactor packing density, electrode spacing, membrane type and composition from 23 different studies to identify the reactor design parameters that primarily govern electrochemical performance of MECs. Using anion exchange membranes resulted in smaller internal resistances (AEM R int = 41± 40 mΩ m 2 ) and larger current density (18 ± 14 A m −2 ) compared to single chamber reactors (SC R int = 68 ± 58 mΩ m 2 ; 22 ± 16 A m −2 ) or MECs with cation exchange membranes (CEM R int = 376 ± 280 mΩ m 2 ; 3.0 ± 2.1 A m −2 ). Higher electrochemical performance for AEM- and SC-MECs translated in larger hydrogen gas production rates (0.122 mL H 2 C −1 for AEM vs 0.117 mL H 2 C −1 for SC), but only when inhibitors against hydrogen scavengers were added in single chamber systems (0.080 mL H 2 C −1 for SC without inhibitors). Following membrane type and composition, maintaining a small electrode spacing was the most critical parameter to improve MEC performance, indicating that the low conductivity of the media primarily limit performance by increasing ohmic resistance. Here, reactor volume and electrode surface area negatively correlated with internal resistance and current density, indicating that better performance of scaled-up reactors can likely be obtained by stacking multiple smaller units rather than just increasing reactor size. Although challenges remain in the implementation of MECs for hydrogen production from liquid wastes, advances in electrochemical engineering of the reactors can facilitate scale up and performance prediction at scale.

Electrochemistry↗
DOE OSTI2023

The effect of ambient ozone exposure on three types of diabetes: a meta-analysis

Background: Ozone as an air pollutant is gradually becoming a threat to people's health. However, the effect of ozone exposure on risk of developing diabetes, a fast-growing global metabolic disease, remains controversial. Objective: To evaluate the impact of ambient ozone exposure on the incidence rate of type 1, type 2 and gestational diabetes mellitus. Method: We systematically searched PubMed, Web of Science, and Cochrane Library databases before July 9, 2022, to determine relevant literature. Data were extracted after quality evaluation according to the Newcastle Ottawa Scale (NOS) and the agency for healthcare research and quality (AHRQ) standards, and a meta-analysis was used to evaluate the correlation between ozone exposure and type 1 diabetes mellitus (T1D), type 2 diabetes mellitus (T2D), and gestational diabetes mellitus (GDM). The heterogeneity test, sensitivity analysis, and publication bias were performed using Stata 16.0. Results: Our search identified 667 studies from three databases, 19 of which were included in our analysis after removing duplicate and ineligible studies. Among the remaining studies, three were on T1D, five were on T2D, and eleven were on GDM. The result showed that ozone exposure was positively correlated with T2D [effect size (ES) = 1.06, 95% CI: 1.02, 1.11] and GDM [pooled odds ratio (OR) = 1.01, 95% CI: 1.00, 1.03]. Subgroup analysis demonstrated that ozone exposure in the first trimester of pregnancy might raise the risk of GDM. However, no significant association was observed between ozone exposure and T1D. Conclusion: Long-term exposure to ozone may increase the risk of T2D, and daily ozone exposure during pregnancy was a hazard factor for developing GDM. Decreasing ambient ozone pollution may reduce the burden of both diseases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Chemical mixture exposure patterns and obesity among U.S. adults in NHANES 2005–2012

The effect of chemical exposure on obesity has raised great concerns. Real-world chemical exposure always imposes mixture impacts, however their exposure patterns and the corresponding associations with obesity have not been fully evaluated. To discover obesity-related mixed chemical exposure patterns in the general U.S. population. Sparse Decompositional Regression (SDR), a model adapted from sparse representation learning technique, was developed to identify exposure patterns of chemical mixtures with exclusion (non-targeted model) and inclusion (targeted model) of health outcomes. We assessed the relationships between the identified chemical mixture patterns and obesity-related indexes. We also conducted a comprehensive evaluation of this SDR model by comparing to the existing models, including generalized linear regression model (GLM), principal component analysis (PCA), and Bayesian kernel machine regression (BKMR). Eight core exposure patterns were identified using the non-targeted SDR model. Patterns of high levels of MEP, high levels of naphthalene metabolites (ΣOH-Nap), and a pattern of high exposure levels of MCOP, MCNP, and MCPP were positively associated with obesity. Patterns of high levels of BP3, and a pattern of higher mixed levels of MPB, PPB, and MEP were found to have negative associations. Associations were strengthened using the targeted SDR model. In the single chemical analysis by GLM, BP3, MBP, PPB, MCOP, and MCNP showed significant associations with obesity or body indexes. The SDR model exceeded the performance of PCA in pattern identification. Both SDR and BKMR identified a positive contribution of ΣOH-Nap and MCOP, as well as a negative contribution of BP3 and PPB to obesity. Our study identified five core exposure patterns of chemical mixtures significantly associated with obesity using the newly developed SDR model. The SDR model could open a new avenue for assessing health effects of environmental mixture contaminants.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Unexpected Changes of Aerosol Burdens With Decreased Convection in the Context of Scale-Aware Convection Schemes

Atmospheric aerosols in global climate models (GCMs) can be removed by both large-scale and convective precipitation. As the horizontal resolution of GCMs increases, it is expected that large-scale precipitation increases and convective precipitation decreases if scale-aware convection schemes are well developed. Here, to explore its impact on aerosol burdens, this study develops a novel method and applies it to the National Center for Atmospheric Research Community Atmosphere Model version 5.3 to mimic the behavior of scale-aware convective schemes. Surprisingly, it is found that aerosol burden increases globally as convective precipitation decreases and large-scale precipitation increases, which can be attributed to the reduced light rain. In the light-rain intensity category, the decreased frequency of convective precipitation is not offset by the increased frequency of large-scale precipitation. Therefore, for aerosol simulations in high-resolution GCMs using scale-aware convection schemes, subgrid convection and large-scale condensation should be coordinated to assure light rain stays the same.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Assessing free tropospheric quasi-equilibrium for different GCM resolutions using a cloud-resolving model simulation of tropical convection

Abstract This study examines the free-tropospheric quasi-equilibrium at different global climate model (GCM) resolutions using the simulation of tropical convection by a cloud-resolving model during the Tropical Western Pacific International Cloud Experiment. The simulated dynamic and thermodynamic fields within the model domain are averaged over subdomains of different sizes equivalent to different GCM resolutions. These coarse-grained fields are then used to compute CAPE and its change with time, and their relationships with simulated convection. Results show that CAPE change with time is controlled predominantly by variations of thermodynamic properties in the planetary boundary layer for all subdomain sizes ranging from 64 to 4 km. Lag correlation analysis shows that CAPE generation by the free-tropospheric dynamical advection (dCAPE ls ) leads convective precipitation but is in phase with convective mass flux at 600 mb and 500 mb vertical velocity for all subdomain sizes. However, the correlation coefficients and regression slopes decrease as the subdomain size decreases for subdomain sizes smaller than 16 km. This is probably due to increased randomness of convection and more scale-dependence of the relationships when the subdomain size reaches the grey zone. By examining the sensitivity of the relationships of convection with dCAPE ls to temporal scales in different subdomain size, it shows that the quasi-equilibrium between dCAPE ls and convection holds well for timescales of 30 min or longer at all subdomain sizes. These results suggest that the free tropospheric quasi-equilibrium assumption may still be useable even for GCM resolutions in the grey zone.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Evaluating and Improving Scale–Awareness of a Convective Parameterization Closure Using Cloud–Resolving Model Simulations of Convection

This study aims to evaluate a revised closure of the Zhang-McFarlane (ZM) scheme for deep convection and to further improve its scale awareness. Output from two cloud-resolving model (CRM) simulations of both midlatitude organized (MC3E) and tropical unorganized (TWP-ICE) convection are used for the evaluation. By averaging the CRM output over different subdomain sizes from 64 km to 4 km, convection-associated fields are obtained to represent the fields at different horizontal resolutions of global climate models (GCMs). The convection parameterization closure is then tested using these fields. Results show that the cloud base mass flux M b determined from the closure has a relatively good relationship with CRM-simulated convection at coarse resolutions for both MC3E and TWP-ICE, but their correlation degrades at higher resolutions, especially when approaching the gray zone scale under 10 km. The fluctuation of CAPE consumption rate per unit cloud base mass flux for different convective events is found to be an important factor affecting the correlation. When averaged over the base domain, the cloud base mass flux determined by the closure is found to increase with decreasing subdomain size, implying that the closure is not scale-aware. To improve its scale-awareness, a modified closure is designed to alleviate the overprediction of convection at high GCM resolutions. Furthermore, results show that the modified closure has the scale-aware ability to suppress the overprediction problem at high GCM resolutions for both MC3E and TWP-ICE.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Domain Wall Patterning and Giant Response Functions in Ferrimagnetic Spinels

Abstract The manipulation of mesoscale domain wall phenomena has emerged as a powerful strategy for designing ferroelectric responses in functional devices, but its full potential is not yet realized in the field of magnetism. This work shows a direct connection between magnetic response functions in mechanically strained samples of Mn 3 O 4 and MnV 2 O 4 and stripe‐like patternings of the bulk magnetization which appear below known magnetostructural transitions. Building off previous magnetic force microscopy data, a small‐angle neutron scattering is used to show that these patterns represent distinctive magnetic phenomena which extend throughout the bulk of two separate materials, and further are controllable via applied magnetic field and mechanical stress. These results are unambiguously connected to the anomalously large magnetoelastic and magnetodielectric response functions reported for these materials, by performing susceptibility measurements on the same crystals and directly correlating local and macroscopic data.

36 MATERIALS SCIENCE↗
NASA NTRS2021

System Validation on the Europa Clipper mission in Early Implementation Phase

NASA’s next flag-ship mission - Europa Clipper, will embark on a journey to Jupiter’s icy moon Europa in 2024 to assess its environment and habitability with a highly capable spacecraft. Post Jupiter-Orbit-Insertion, the spacecraft will be commanded to perform intricate, yet meticulously planned Europa flybys to perform science investigations using a suite of instruments, while withstanding Jupiter’s harsh radiation environment. The success of this mission is dependent on a well-coordinated project and its elements such as the flight hardware and software, the ground support and mission operations teams, procedures and other cross-cutting elements. The Europa Clipper project needs to ensure that these elements are realized at a reasonable confidence level prior to launch and other mission critical events. System Validation test and analysis activities exercise and confirm the integrity of the system of all project elements in the expected flight environment with reasonable stressing conditions. These activities go beyond system design requirements verification and are driven by validation objectives that describe the end-to-end functional and operational capabilities required during nominal and off-nominal flight-like scenarios and critical events. The challenges associated with validating that the Europa Clipper project as a whole can function and perform correctly to meet the intended mission objectives with the as-delivered capabilities of all of its elements are daunting. This paper discusses the systematic methodology established in the early implementation phase of the Europa Clipper project for developing System Validation activities and their validation objectives, and addressing any validation-related challenges on the project. Approaches include decomposition of mission objectives using activity timelines in the Mission Design plan for developing nominal scenarios, use of fault trees for exploring off-nominal cases and system boundaries, and use of Model-based Systems Engineering (MBSE) tools for planning and prioritizing these activities.

Wang, Xu↗
DOE OSTI2021

HPRT promotes proliferation and metastasis in head and neck squamous cell carcinoma through direct interaction with STAT3

Highlights: • The higher expression of HPRT in HNSCC tissue was related to poor prognosis of patients. • Overexpression of HPRT increased the gene expression of epithelial mesenchymal transition markers. • HPRT directly interacted with STAT3. • Knocking down HPRT significantly decreased tumour growth and enhanced the anticancer effect against HNSCC xenografts. Increasing effort has been put into finding novel molecular pathways to improve the efficiency of EGFR inhibitors against head and neck squamous cell cancer (HNSCC). In this study, we performed data mining and bioinformatically analysed RNA-Seq data downloaded from TCGA and confirmed that higher expression of HPRT in HNSCC tissue was related to poor prognosis of patients. Then, we conducted in vitro and in vivo loss- and gain-of-function experiments to demonstrate the role of HPRT in HNSCC cell lines. Overexpression of HPRT increased the gene expression of epithelial mesenchymal transition markers via direct interaction with STAT3. Knocking down HPRT significantly decreased tumour growth and enhanced the anticancer effect of EGFR inhibitors against HNSCC xenografts. In conclusion, HPRT is a binding partner of STAT3 that promotes EMT and proliferation. Our findings support HPRT as a promising prognostic indicator and potential therapeutic target for HNSCC.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Quality assurance test of silicon photomultipliers and electronic boards for STAR event plane detector

The event plane detector (EPD), installed in the Solenoid Tracker at the Relativistic Heavy-Ion Collider located at the Brookhaven National Laboratory is a plastic scintillator-based device that measures the reaction centrality and event plane in the forward region of the relativistic heavy-ion collisions. We used silicon photomultiplier (SiPM) arrays to detect the photons produced in the scintillator via the fiber connection. Signals from the SiPM arrays were amplified by the front-end electronic (FEE) board, and sent to the analog-to-digital converter (ADC) boards for further processing via the receiver (RX) board. The full EPD system consisted of 24 super-sectors (SSs); each SS was equipped with two SiPM boards, two FEE boards and two RX boards, and they corresponded to 744 readout channels. All these boards were mass produced at the University of Science and Technology of China, with a dedicated quality assurance (QA) procedures applied to identify any problems before deployment. This article describes the details of the QA method and the related test system. As a result, the QA test results are presented along with the discussions.

EPD↗
DOE OSTI2020

Parameterizing Subgrid Variations of Land Surface Heat Fluxes to the Atmosphere Improves Boreal Summer Land Precipitation Simulation With the NCAR CESM1.2

Subgrid horizontal variations of land surface heat fluxes to the atmosphere resulting from subgrid land cover heterogeneity are important in land-atmosphere interaction in global climate models (GCMs). To incorporate it, a parameterization using stochastic sampling based on truncated normal distributions diagnosed from the land model and internal ensemble mean of multiple calls to the planetary boundary layer and deep convection schemes is developed. After its implementation in the National Center for Atmospheric Research (NCAR) Community Earth System Model version 1.2 (CESM1.2), large changes of simulated land precipitation are found to occur in regions where large subgrid variations of surface heat fluxes exist. The simulated precipitation is improved in boreal summer, especially over eastern China and the coastal areas of the Bay of Bengal. The improved precipitation is mainly a result of improved large-scale moisture convergence and advection by altered vertical diffusion and convection.

58 GEOSCIENCES↗