Search NASA⌕ Search

Engineering topics

Wang, Yanbin

Publications and source records attributed to Wang, Yanbin.

120 records · Page 7

Cell assemblies for reproducible multi-anvil experiments (the COMPRES assemblies)

The multi-anvil high-pressure technique is an important tool in high-pressure mineralogy and petrology, as well as in chemical synthesis, allowing the treatment of large (millimeter-size) samples of minerals, rocks, and other materials at pressures of a few GPa to over 25 GPa and simultaneous uniform temperatures up to 2500 C and higher. A series of cell assemblies specially designed and implemented for interlaboratory use are described here. In terms of the size of the pressure medium and the anvil truncation size, the five sizes of assemblies developed here are an 8/3, 10/5, 14/8, 18/12, and 25/15 assembly. As of this writing, these assemblies are in widespread use at many laboratories. The details of design, construction, and materials developed or used for the assemblies are presented here.

58 GEOSCIENCES↗

Recent Advances in High Pressure and Temperature Rheological Studies

Rheological studies at high pressure and temperature using in-situ X-ray diffraction and imaging have made significant progresses in recent years, thanks to a combination of recent developments in several areas: (1) advances in synchrotron X-ray techniques, (2) advances in deformation devices and the abilities to control pressure, temperature, stress, strain and strain rates, (3) theoretical and computational advances in stress determination based on powder and single crystal diffraction, (4) theoretical and computational advances in modeling of grain-level micromechanics based on elasto-plastic and visco-plastic self-consistent formulations. In this article, we briefly introduce the experimental techniques and theoretical background for in-situ high pressure, high temperature rheological studies, and then review recent studies of rheological properties of major mantle materials. Some currently encountered issues have prompted developments in single-crystal quasi-Laue diffraction for complete stress tensor determination and textural evolution of poly-phased composites based on X-ray microtomography. Future prospects are discussed.

58 GEOSCIENCES↗

Combined ultrasonic elastic wave velocity and microtomography measurements at high pressures

Combined ultrasonic and microtomographic measurements were conducted for simultaneous determination of elastic property and density of noncrystalline materials at high pressures. A Paris-Edinburgh anvil cell was placed in a rotation apparatus, which enabled us to take a series of x-ray radiography images under pressure over a 180{sup o} angle range and construct accurately the three-dimensional sample volume using microtomography. In addition, ultrasonic elastic wave velocity measurements were carried out simultaneously using the pulse reflection method with a 10{sup o} Y-cut LiNbO{sub 3} transducer attached to the end of the lower anvil. Combined ultrasonic and microtomographic measurements were carried out for SiO{sub 2} glass up to 2.6 GPa and room temperature. A decrease in elastic wave velocities of the SiO{sub 2} glass was observed with increasing pressure, in agreement with previous studies. The simultaneous measurements on elastic wave velocities and density allowed us to derive bulk (K{sub s}) and shear (G) moduli as a function of pressure. K{sub s} and G of the SiO{sub 2} glass also decreased with increasing pressure. The negative pressure dependence of K{sub s} is stronger than that of G, and as a result the value of K{sub s} became similar to G at 2.0-2.6 GPa. There is no reason why we cannot apply this new technique to high temperatures as well. Hence the results demonstrate that the combined ultrasonic and microtomography technique is a powerful tool to derive advanced (accurate) P-V-Ks-G-(T) equations of state for noncrystalline materials.

47 OTHER INSTRUMENTATION↗

A combination of a Drickamer anvil apparatus and monochromatic X-rays for stress and strain measurements under high pressure

A modified Drickamer anvil apparatus has been developed to combine with monochromatic synchrotron radiation for high-pressure X-ray diffraction and radiography in the GSECARS bending-magnet station, 13-BM-D, at the Advanced Photon Source, Argonne, USA. Using this experimental set-up, deformation experiments can be carried out at pressures in excess of 30 GPa at high temperatures. Differential stresses and total axial strains of polycrystalline platinum and Mg{sub 2}SiO{sub 4} ringwoodite have been measured up to 32 GPa at room temperature using tungsten carbide anvils. The total axial strain of the platinum increases with pressure and reaches about 55% at the highest pressure. A test run using a composite sintered diamond anvil system was performed. The use of X-ray-tranparent anvils enables the entire Debye rings to be observed up to 10{sup o} 2{theta}. With high-energy photons (65-70 keV), this allows a coverage in Q (= 2{pi} sin{theta}/{lambda}) to about 3 {angstrom}{sup -1}, thus making it possible to evaluate hydrostatic pressure and differential stress in crystalline minerals using diffraction. This, coupled with the ability to determine axial strain, allows deformation studies to be performed to pressures above 30 GPa.

43 PARTICLE ACCELERATORS↗

High pressure effects on the iron iron oxide and nickel nickel oxide oxygen fugacity buffers

The chemical potential of oxygen in natural and experimental samples is commonly reported relative to a specific oxygen fugacity (fO{sub 2}) buffer. These buffers are precisely known at 1 bar, but under high pressures corresponding to the conditions of the deep Earth, oxygen fugacity buffers are poorly calibrated. Reference (1 bar) fO{sub 2} buffers can be integrated to high pressure conditions by integrating the difference in volume between the solid phases, provided that their equations of state are known. In this work, the equations of state and volume difference between the metal-oxide pairs Fe-FeO and Ni-NiO were measured using synchrotron X-ray diffraction in a multi-anvil press and laser heated diamond anvil cells. The results were used to construct high pressure fO{sub 2} buffer curves for these systems. The difference between the Fe-FeO and Ni-NiO buffers is observed to decrease significantly, by several log units, over 80 GPa. The results can be used to improve interpretation of high pressure experiments, specifically Fe-Ni exchange between metallic and oxide phases.

43 PARTICLE ACCELERATORS↗

Elasticity of (Mg[subscript 0.87]Fe[subscript 0.13])[subscript 2]SiO[subscript 4] wadsleyite to 12 GPa and 1073 K

Elasticity of (Mg{sub 0.87}Fe{sub 0.13}){sub 2}SiO{sub 4} wadsleyite has been measured at simultaneous high pressure and high temperature to 12 GPa and 1073 K using ultrasonic interferometry in conjunction with synchrotron X-radiation. The elastic moduli and their pressure and temperature derivatives are precisely determined using pressure-standard-free third-order and fourth-order finite strain equations. Combined with previous thermoelastic data on olivine, the density, velocity and acoustic impedance contrasts between {alpha}- and {beta}-(Mg{sub 0.9}Fe{sub 0.1}){sub 2}SiO{sub 4} at 410-km depth are calculated along a 1673 K adiabatic geotherm. Both the third- and fourth-order finite strain equation fitting results give estimation of {approx}33-58% olivine content in the upper mantle to account for a seismic discontinuity of {approx}5% velocity jumps, and 8.5% (P wave) and 11.1% (S wave) impedance jumps at 410 km depth.

43 PARTICLE ACCELERATORS↗

The large-volume high-pressure facility at GSECARS: A 'Swiss-army-knife' approach to synchrotron-based experimental studies

A number of new techniques have been developed at the large-volume press (LVP) high-pressure facility at the GeoSoilEnviroCARS (GSECARS) sector of the advanced photon source (APS). This article describes the 10 MN (1000 T) and 2.5 MN (250 T) hydraulic presses in the insertion device (ID) and bending magnet (BM) beamlines, respectively, with several apparatus and various diffraction and imaging techniques developed since the inception of the facility. Several Kawai-type high-pressure modules, whose second-stage anvils range from 10 mm to 25.4 mm in edge lengths, are used in the hydraulic presses, with pressure (P) and temperature (T) capabilities up to 30 GPa and 3000 K. A DIA-type apparatus can be compressed in both presses for studies requiring large sample volumes. A deformation DIA (D-DIA) has been developed to allow controlled deformation studies on both crystalline and glass materials, using monochromatic diffraction and imaging, up to 20 GPa and 1800 K. A high-pressure tomography apparatus is available for conducting tomography studies at high P and T, with a typical spatial resolution of a few micrometers. Toroidal anvil modules provide large 2{theta} angles for studies of non-crystalline materials, and a new large D-DIA module is under construction for double-stage megabar pressure generation as well as deformation on large samples with the capability of acoustic emission detection. The flexible design of the monochromator at the BM beamline makes it feasible to switch between monochromatic and white-beam mode during an experiment, ideal for monochromatic imaging studies (e.g., high-P tomography) with energy-dispersive diffraction for pressure measurements. A new angle-dispersive diffraction technique has been developed for high P-T crystallography studies, where a solid-state detector is step-scanned, thereby collecting a large number of angle-dispersive spectra over a wide range of photon energies recorded in the multi-channel analyzer. An ultrasonic interferometer is available and has been used in several high-pressure modules for acoustic velocity measurements. These unique features allow world-wide users to select the best experimental techniques for tackling a wide range of problems relevant to earth and planetary science, materials science, physics, and chemistry. Scientific highlights are provided and future improvements and prospects are discussed.

43 PARTICLE ACCELERATORS↗

Volumetric properties of magnesium silicate glasses and supercooled liquid at high pressure by X-ray microtomography

The volumetric properties of silicate glasses and supercooled liquid are examined at high pressures and temperatures using X-ray computed tomography (CT) and absorption. The high pressure X-ray microtomography (HPXMT) system at the Advanced Photon Source, Argonne National Laboratory (GeoSoilEnvironCARS 13-BM-D beamline) consists of two opposing anvils compressed within an X-ray-transparent containment ring supported by thrust bearings and loaded using a 250-ton hydraulic press. This system permits the pressure cell to rotate under the load, while collecting radiographs through at least 180{sup o} of rotation. The 13-BM-D beamline permits convenient switching between monochromatic radiation required for radiography and polychromatic radiation for pressure determination by energy dispersive diffraction. We report initial results on several refractory magnesium silicate glasses synthesized by levitation laser heating. Volume changes during room temperature compression of Mg-silicate glasses with 33 mol% and 38 mol% SiO2 up to 11.5 GPa give an isothermal bulk moduli of 93--100 GPa for a K' of 1. These values are consistent with ultrasonic measurements of more silica-rich glasses. The volumetric properties of amorphous MgSiO{sub 3} at 2 GPa were examined during annealing up to 1000 C. We consider the consequences of heating through the glass transition and the implications for thermal expansivity of supercooled liquids at high pressure. Our results illustrate the capabilities of HPXMT for studies of refractory glasses and liquids at high pressure and offer strategies for future studies of liquid densities within the melting interval for magmas in planet interiors.

36 MATERIALS SCIENCE↗

Conserved synteny at the protein family level reveals genes underlying Shewanella species' cold tolerance and predicts their novel phenotypes

In spite of a rapid growth in the number of sequenced bacteria and significant progress in the annotation of their genomes, current computational technologies are limited in their capability to associate the genotype of a sequenced bacterial organism with its phenotypic traits. We evaluated two novel, complimentary approaches that can facilitate this task. They are based on correlation between the numbers of the trait-specific protein families or Pfam domains and a quantitative characteristic of the phenotypic trait among different bacterial species. Our first, a top-down approach, involves quantification and comparison of a higher-level characteristic, a bacterial phenotype, to reveal genomic characteristics and specific genes related to the phenotype. The second, a bottom-up approach, predicts phenotypes by quantification of molecular functions in the genomes of closely related bacterial species and by following pair-wise correlation of the molecular functions enrichments and their network clustering. The approach is implemented using network analysis tools. The approaches were validated by a comparison of 19 sequenced Shewanella species. Using the first approach, we were able to identify specific domains and gene clusters associated with cold tolerance of these mesophilic species and to predict some novel cellular mechanisms underlying the phenotype. We find that in three tested species both cold and salt tolerance relate to presence in their genome of a specific Na+/H+ antiporter. By using the second approach we identified genomic clusters predicting several environmentally relevant phenotypes in the newly sequenced Shewanella species including degradation of aromatic compounds by an aerobic hybrid pathway, utilization of ethanolamine, and arsenic and copper resistance. Results of the study confirm validity of the approaches and their utility for (i) computational predictions of phenotypic traits in the sequenced organisms, (ii) revealing genomic determinants of known complex phenotypes, (iii) orthologs prediction, and for (iv) discovery of function of unknown domains and hypothetical proteins.

59 BASIC BIOLOGICAL SCIENCES↗

A scanning angle energy-dispersive X-ray diffraction technique for high-pressure structure studies in diamond anvil cells

A scanning angle diffraction technique with an energy-dispersive solid-state detector (SSD) and white synchrotron radiation has been developed for high-pressure structure studies in diamond anvil cells (DACs). This technique is similar to the CAESAR technique [Y. Wang, T. Uchida, R. Von Dreele, M.L. Rivers, N. Nishiyama, K. Funakoshi, A. Nozawa, and H. Kaneko, A new technique for angle-dispersive powder diffraction using an energy-dispersive setup and synchrotron radiation, J. Appl. Cryst. 37 (2004), p. 947] developed for large-volume presses, but extended to DAC applications with high spatial resolution. The main feature of the technique is the well-defined collimation in the beam path to the detector, which improves the signal-to-noise ratio significantly, compared to routine monochromatic angle-dispersive powder diffraction with area detectors. This is particularly useful and essential for low-scattering materials and for amorphous and liquid diffraction/scattering studies using DACs. Data collected from crystalline and amorphous samples in DACs show that a coarse 2{theta} scan (0.1--0.2{sup o} for crystals and 0.5{sup o} for amorphous structure) is sufficient to obtain reasonable diffraction resolution. The scanning angle energy-dispersive X-ray diffraction technique provides angle-dispersive X-ray diffraction (ADXD) data in multiple energies. Such multi-energy ADXD data carry much more information than regular single-energy ADXD, which could provide site-specific atomic structure information for full structure refinement.

43 PARTICLE ACCELERATORS↗