Search NASA⌕ Search

Engineering topics

Wang, Yaxing

Publications and source records attributed to Wang, Yaxing.

Ultrafiltration separation of Am(VI)-polyoxometalate from lanthanides

Partitioning of americium from lanthanides (Ln) present in used nuclear fuel plays a key role in the sustainable development of nuclear energy. This task is extremely challenging because thermodynamically stable Am(III) and Ln(III) ions have nearly identical ionic radii and coordination chemistry. Oxidization of Am(III) to Am(VI) produces AmO 2 2+ ions distinct with Ln(III) ions, which has the potential to facilitate separations in principle. However, the rapid reduction of Am(VI) back to Am(III) by radiolysis products and organic reagents required for the traditional separation protocols including solvent and solid extractions hampers practical redox-based separations. Herein, we report a nanoscale polyoxometalate (POM) cluster with a vacancy site compatible with the selective coordination of hexavalent actinides ( 238 U, 237 Np, 242 Pu and 243 Am) over trivalent lanthanides in nitric acid media. To our knowledge, this cluster is the most stable Am(VI) species in aqueous media observed so far. Ultrafiltration-based separation of nanoscale Am(VI)-POM clusters from hydrated lanthanide ions by commercially available, fine-pored membranes enables the development of a once-through americium/lanthanide separation strategy that is highly efficient and rapid, does not involve any organic components and requires minimal energy input.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Emergence of Uranium as a Distinct Metal Center for Building Intrinsic X‐ray Scintillators

Abstract The combination of high atomic number and high oxidation state in U VI materials gives rise to both high X‐ray attenuation efficiency and intense green luminescence originating from ligand‐to‐metal charge transfer. These two features suggest that U VI materials might act as superior X‐ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X‐ray scintillation in a uranyl–organic framework ( SCU‐9 ) that is observable by the naked eye is reported. Combining the advantage in minimizing the non‐radiative relaxation during the X‐ray excitation process over those of inorganic salts of uranium, SCU‐9 exhibits a very efficient X‐ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X‐ray intensity, and is comparable with that of commercially available CsI:Tl. SCU‐9 possesses an improved X‐ray attenuation efficiency ( E >20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl.

Wang, Yaxing↗

Emergence of Uranium as a Distinct Metal Center for Building Intrinsic X-ray Scintillators

The combination of high atomic number and high oxidation state in U VI materials gives rise to both high X-ray attenuation efficiency and intense green luminescence originating from ligand-to-metal charge transfer. These two features suggest that U VI materials might act as superior X-ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X-ray scintillation in a uranyl–organic framework (SCU-9) that is observable by the naked eye is reported. Combining the advantage in minimizing the non-radiative relaxation during the X-ray excitation process over those of inorganic salts of uranium, SCU-9 exhibits a very efficient X-ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X-ray intensity, and is comparable with that of commercially available CsI:Tl. SCU-9 possesses an improved X-ray attenuation efficiency (E>20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl.

Chemistry↗

Superprotonic conduction through one-dimensional ordered alkali metal ion chains in a lanthanide-organic framework

Although no evident hydrogen-bond network appears, an ultrahigh proton conductivity of 2.91 × 10 −2 S cm −1 at 363 K and 90% RH with an ultralow activation energy of 0.10 eV was observed in an anionic lanthanide-organic framework Na 2 [Eu(SDB) 2 (COO)]·0.375DMF·0.4H 2 O (1); both values approach the records among all reported proton-conducting MOF materials. This suggests that the proton conduction process in 1 is reminiscent of the Grotthuss mechanism, which together reveals an effective proton transportation pathway associated with aligned Na + and their coordinated water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile and Efficient Decontamination of Thorium from Rare Earths Based on Selective Selenite Crystallization

The coexistence of radioactive contaminants (e.g., thorium, uranium, and their daughters) in rare earth minerals introduces significant environmental, economic, and technological hurdles in modern rare earth production. Capable, low cost, and green decontamination strategies are therefore desired to ameliorate this problem. In this work, we report a single-step and quantitative decontamination strategy of thorium from rare earths based on a unique periodic trend in the formation of crystalline selenite compounds across the lanthanide series, where Ce(III) is fully oxidized in situ to Ce(IV). This gives rise to a crystallization system that is highly selective to trap tetravalent f-blocks while all other trivalent lanthanides completely remain in solution when coexist. These findings are bolstered by first-principles calculations of lattice energies and an examination of bonding in these compounds. This system is contrasted with typical natural and synthetic systems, where trivalent and tetravalent f-block elements often cocrystallize. The separation factors after one round of crystallization were determined from binary systems of Th(IV)/La(III), Th(IV)/Eu(III), and Th(IV)/Yb(III) to reach 2.1 × 10 5 , 1.2 × 10 5 , and 9 × 10 4 , respectively. Selective crystallization of thorium from a simulated monazite composite yields a separation factor of 1.9 × 10 3 with nearly quantitative removal of thorium.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Rare earth separations by selective borate crystallization

Lanthanides possess similar chemical properties rendering their separation from one another a challenge of fundamental chemical and global importance given their incorporation into many advanced technologies. New separation strategies combining green chemistry with low cost and high efficiency remain highly desirable. We demonstrate that the subtle bonding differences among trivalent lanthanides can be amplified during the crystallization of borates, providing chemical recognition of specific lanthanides that originates from Ln 3+ coordination alterations, borate polymerization diversity and soft ligand coordination selectivity. Six distinct phases are obtained under identical reaction conditions across lanthanide series, further leading to an efficient and cost-effective separation strategy via selective crystallization. As proof of concept, Nd/Sm and Nd/Dy are used as binary models to demonstrate solid/aqueous and solid/solid separation processes. Controlling the reaction kinetics gives rise to enhanced separation efficiency of Nd/Sm system and a one-step quantitative separation of Nd/Dy with the aid of selective density-based flotation.

36 MATERIALS SCIENCE↗

Boosting Proton Conductivity in Highly Robust 3D Inorganic Cationic Extended Frameworks through Ion Exchange with Dihydrogen Phosphate Anions

The limited long-term hydrolytic stability of rapidly emerging 3D-extended framework materials (MOFs, COFs, MOPs, etc.) is still one of major barriers for their practical applications as new solid-state electrolytes in fuel cells. To obtain hydrolytically stable materials, two H 2 PO 4 − -exchanged 3D inorganic cationic extended frameworks (CEFs) were successfully prepared by a facile anion-exchange method. Both anion-exchanged CEFs (YbO(OH)P and NDTBP) show significantly enhanced proton conductivity when compared with the original materials (YbO(OH)Cl and NDTB) with an increase of up to four orders-of-magnitude, reaching 2.36×10 −3 and 1.96×10 −2 S cm −1 at 98 % RH and 85 °C for YbO(OH)P and NDTBP, respectively. These values are comparable to the most efficient proton-conducting MOFs. In addition, these two anion-exchanged materials are stable in boiling water, which originates from the strong electrostatic interaction between the H 2 PO 4 − anion and the cationic host framework, showing a clear advance over all the acid-impregnated materials (H 2 SO 4 @MIL-101, H 3 PO 4 @MIL-101, and H 3 PO 4 @Tp-Azo) as practical solid-state fuel-cell electrolytes. Finally, this work offers a new general and efficient approach to functionalize 3D-extended frameworks through an anion-exchange process and achieves water-stability with ultra-high proton conductivity above 10 −2 S cm −1 .

anion exchange↗

Unravelling the Proton Conduction Mechanism from Room Temperature to 553 K in a 3D Inorganic Coordination Framework

We report the preparation of proton-conducting materials that are functional and stable at intermediate temperatures (393–573 K) is a focal point of fuel cell development. The purely inorganic material, HNd(IO 3 ) 4 , which possesses a dense 3D framework structure, can reach a maximum of 4.6 × 10 –4 S·cm –1 at 353 K and 95% relative humidity and exhibit a high conductivity of 8.0 × 10 –5 S·cm –1 from 373 to 553 K under the flow of wet N 2 . HNd(IO 3 ) 4 exhibits a variety of improvements including high thermal stability, low solubility in water, and resistance to reducing atmosphere. The proton conductivity in such a wide temperature range originates from the intrinsic liberated protons in the structure and the resulting 1D hydrogen-bonding network confirmed by bond valence sum calculation and solid-state NMR analysis. Moreover, two different activation energies are observed in different temperature regions (0.23 eV below 373 K and 0.026 eV from 373 to 553 K), indicating that two types of proton motion are responsible for proton diffusion, as further domenstrated by temperature-dependent open-circuit voltage hysteresis in a tested fuel cell assembly as well as variable-temperature and double quantum filtered solid-state NMR measurements.

electrical conductivity↗