Cooperative dihydrogen activation with unsupported uranium–metal bonds and characterization of a terminal U( iv ) hydride
The cooperation between U( iii ) and Al( i ) centres leads to dihydrogen reduction.
Engineering topics
Publications and source records attributed to Ward, Robert J..
The cooperation between U( iii ) and Al( i ) centres leads to dihydrogen reduction.
Correction for ‘Isolation of C1 through C4 derivatives from CO using heteroleptic uranium( iii ) metallocene aryloxide complexes’ by Robert J. Ward et al. , Chem. Sci. , 2023, 14 , 2024–2032, https://doi.org/10.1039/D2SC06375A.
Functionalization of CO from C1 to C4 is acheived using a heteroleptic uranium( iii ) complex.
Herein, the reactivity of two metallocene aryloxide U(III) complexes, [(C 5 Me 5 ) 2 U(O-Ar)], Ar = 4- t BuC 6 H 4 , 1; Ar = 2,6- t Bu 2 -4-CH 3 C 6 H 2 (BHT), 3, with CO 2 and CS 2 has been investigated. The reaction of 1 with CO 2 produces a bridging oxo complex, [{(C 5 Me 5 ) 2 (4- t BuC 6 H 4 -O)U} 2 (μ 2 -O)], 4, while 3 with CO 2 results in reductive disproportionation to form the bridging carbonate species, [{(C 5 Me 5 ) 2 (BHT)U} 2 (μ 2 -κ 2 :η 1 -CO 3 )], 5. The difference in reactivity can be attributed to the steric properties of the ligand because the reaction of 3 with an oxo-delivering agent yields a U(V) terminal oxo complex, [(C 5 Me 5 ) 2 (BHT)U=O], 6. Reduction of CS 2 to form a bridging (CS 2 ) 2- ligand, [{(C 5 Me 5 ) 2 (tBuC 6 H 4 -O)U}2(μ 2 -CS 2 )], 7, is observed with 1, while the reaction of 3 with CS 2 also produces a bridging (CS 2 ) 2- reduced ligand complex, followed by C-H bond activation of a methyl group from one (C5Me 5 ) 1- ring, [(C5Me 5 ) 2 (BHT)U{μ 2 -C(H)S 2 }U(C 5 Me 4 CH 2 )(C 5 Me 5 )(BHT)], 8. All compounds are characterized by NMR and IR spectroscopy, and their solid-state structures are determined by X-ray crystallography.
The coordination of tBuNC and CO with the diarsenido complexes (C 5 Me 5 ) 2 An(η 2 -As 2 Mes 2 ), An=Th, U, has been investigated. For the first time, a comparison between isostructural complexes of Th IV and U IV has been possible with CO; density functional calculations indicated an appreciable amount of π backbonding that originates from charge transfer from an actinide-arsenic sigma bond. The calculated CO stretching frequencies in the Th IV and U IV diarsenido complexes are consistent with the experimental measurements, both show large shifts to lower frequency. We demonstrate that the π backbonding is crucial to explaining the red shifts of CO frequency upon An IV complex formation. Interestingly, this interaction essentially correlates to the parallel orientation of π*(C-O) orbitals relative to the An-As bond.
We describe an example of a two-electron metal- and ligand-based reduction of Me 3 SiN 3 using uranium( iv ) complexes with varying steric properties. With uranium-based reduction, a U( vi ) intermediate is isolated.
The flight problems experienced with the reusable Space Shuttle Orbiter have decreased during subsequent flights of each vehicle. By comparison to first flights of previous vehicles, the problems encountered on the initial flight of each new vehicle entering the fleet decreased. This improvement in turn has reduced the turnaround time between flights significantly and thus greatly enhanced the increased Space Shuttle launch frequency. The reusable manned space vehicle concept necessitated the development of a flight problem recognition and resolution system which would enable a thorough and timely vehicle turnaround flow. Flight evaluation, testing, and repair of manned spacecraft to enhance reliability and to ensure mission success is a unique activity. Real-time recognition of the flight problem, prompt isolation of the cause, and timely implementation of the corrective action are the keys to maintaining an operational fleet. Examples of flight problems that have been encountered as well as the corrective actions implemented during the first 24 Space Shuttle missions are presented. The corrective actions taken to preclude problem recurrence include modifications of hardware designs, manufacturing processes, flight software, test methods, and operational procedures.
The effects of wing-lower-surface dive-recovery flaps on the aero- dynamic characteristics of a transonic seaplane model and a transonic transport model having 40 deg swept wings have been investigated in the Langley 16-foot transonic tunnel. The seaplane model had a wing with an aspect ratio of 5.26, a taper ratio of 0.333, and NACA 63A series airfoil sections streamwise. The transport model had a wing with an aspect ratio of 8, a taper ratio of 0.3, and NACA 65A series airfoil sections perpendicular to the quarter-chord line. The effects of flap deflection, flap longitudinal location, and flap sweep were generally investigated for both horizontal-tail-on and horizontal-tail-off configurations. Model force and moment measurements were made for model angles of attack from -5 deg to 14 deg in the Mach number range from 0.70 to 1.075 at Reynolds numbers of 2.95 x 10(exp 6) to 4.35 x 10(exp 6). With proper longitudinal location, wing-lower-surface dive-recovery flaps produced lift and pitching-moment increments that increased with flap deflection. For the transport model a flap located aft on the wing proved to be more effective than one located more forward., both flaps having the same span and approximately the same deflection. For the seaplane model a high horizontal tail provided added effectiveness for the deflected-flap configuration.