Search NASA⌕ Search

Engineering topics

Watanabe, T

Publications and source records attributed to Watanabe, T.

At least 19 records

ONE-DIMENSIONAL MODELING FOR TEMPERATURE-DEPENDENT UPFLOW IN THE DIMMING REGION OBSERVED BY HINODE/EUV IMAGING SPECTROMETER

We previously found a temperature-dependent upflow in the dimming region following a coronal mass ejection observed by the Hinode EUV Imaging Spectrometer (EIS). In this paper, we reanalyzed the observations along with previous work on this event and provided boundary conditions for modeling. We found that the intensity in the dimming region dramatically drops within 30 minutes from the flare onset, and the dimming region reaches the equilibrium stage after {approx}1 hr. The temperature-dependent upflows were observed during the equilibrium stage by EIS. The cross-sectional area of the flux tube in the dimming region does not appear to expand significantly. From the observational constraints, we reconstructed the temperature-dependent upflow by using a new method that considers the mass and momentum conservation law and demonstrated the height variation of plasma conditions in the dimming region. We found that a super-radial expansion of the cross-sectional area is required to satisfy the mass conservation and momentum equations. There is a steep temperature and velocity gradient of around 7 Mm from the solar surface. This result may suggest that the strong heating occurred above 7 Mm from the solar surface in the dimming region. We also showed that the ionization equilibrium assumption in the dimming region is violated, especially in the higher temperature range.

79 ASTRONOMY AND ASTROPHYSICS↗

MAGNETIC RECONNECTION IN NON-EQUILIBRIUM IONIZATION PLASMA

We have studied the effect of time-dependent ionization and the recombination processes on magnetic reconnection in the solar corona. Petschek-type steady reconnection, in which the magnetic energy is mainly converted at the slow-mode shocks, was assumed. We carried out the time-dependent ionization calculation in the magnetic reconnection structure. We only calculated the transient ionization of iron; the other species were assumed to be in ionization equilibrium. The intensity of line emissions at specific wavelengths was also calculated for comparison with Hinode or other observations in future. We found the following: (1) iron is mostly in non-equilibrium ionization in the reconnection region; (2) the intensity of line emission estimated by the time-dependent ionization calculation is significantly different from that determined from the ionization equilibrium assumption; (3) the effect of time-dependent ionization is sensitive to the electron density in the case where the electron density is less than 10{sup 10} cm{sup -3}; (4) the effect of thermal conduction lessens the time-dependent ionization effect; and (5) the effect of radiative cooling is negligibly small even if we take into account time-dependent ionization.

79 ASTRONOMY AND ASTROPHYSICS↗

Clustering effects for explaining an anomalous JLab result on the {sup 9}Be structure function

An anomalous nuclear modification was reported by JLab measurements on the beryllium-9 structure function F{sub 2}. It is unexpected in the sense that a nuclear modification slope is too large to be expected from its average nuclear density. We investigated whether it is explained by a nuclear clustering configuration in {sup 9}Be with two {alpha} nuclei and surrounding neutron clouds. Such clustering aspects are studied by using antisymmetrized molecular dynamics (AMD) and also by a simple shell model for comparison. We consider that nuclear structure functions F{sub 2}{sup A} consist of a mean conventional part and a remaining one depending on the maximum local density. The first mean part does not show a significant cluster effect on F{sub 2}. However, we propose that the remaining one could explain the anomalous JLab slope, and it is associated with high densities created by the cluster formation in {sup 9}Be. The JLab measurement is possibly the first signature of clustering effects in high-energy nuclear reactions. A responsible physics could be an internal nucleon modification, which is caused by the high densities due to the cluster configuration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sideband excitation of trapped ions by rapid adiabatic passage for manipulation of motional states

We describe an analysis and experimental results of the manipulation of motional states of a single trapped {sup 40}Ca{sup +} ion based on sideband excitation by rapid adiabatic passage. When the sideband transition is excited by rapid adiabatic passage, adiabaticity may be affected by ac Stark shifts. We investigate the influence of ac Stark shifts and compensate for these shifts with an additional laser field. This makes the population transfer by rapid adiabatic passage more robust with respect to experimental parameters. Finally, we manipulate the motional states and generate motional Fock states of a single {sup 40}Ca{sup +} ion by rapid adiabatic passage with ac Stark compensation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron density dependence of intensity ratio for FeXXII extreme ultraviolet emission lines arising from different ground levels in electron beam ion trap and large helical device

Extreme ultraviolet (EUV) spectra of highly charged iron ions in a wavelength range of 100-300 A have been observed from two different plasma sources of the Tokyo Electron Beam Ion Trap (Tokyo-EBIT) with a monoenergetic electron beam and a Large Helical Device (LHD) with Maxwellian electron energy. The excitation process of the spectral lines is compared between the two plasmas, and it is found that the excitation process for Fe XIX - Fe XXII ions is clearly different. Namely, the EUV emission lines from the EBIT plasma are only dominated by electron impact excitation connected to the ground state, but the excitation mechanism is not so simple in the LHD plasma. The difference in the excitation process is studied by measuring the intensity ratio of EUV emission lines (114.412 A [1s{sup 2}2s2p{sup 2} {sup 2}P{sub 3/2}{yields}1s{sup 2}2s{sup 2}2p {sup 2}P{sub 3/2}]/117.144 A [1s{sup 2}2s2p{sup 2} {sup 2}P{sub 1/2}{yields}1s{sup 2}2s{sup 2}2p {sup 2}P{sub 1/2}]) arising from different ground levels in the Fe XXII ions. The line intensity ratio has an extremely small value of 0.2 in the EBIT plasma with a low beam current of 30 mA and a beam energy of 2 keV, while the ratio varies with the electron density n{sub e} in the LHD plasmas, i.e., 0.35 for n{sub e} = 1 x 10{sup 13} cm{sup -3} and 0.65 for n{sub e} = 4 x 10{sup 13} cm{sup -3}. Here, the electron density of the EBIT plasma is estimated to be smaller than 10{sup 12} cm{sup -3} and the electron temperature of the LHD plasmas is 2 keV. The dependence of the line intensity ratio on the observed electron density is analyzed for both the EBIT and the LHD plasmas using several collisional-radiative (CR) models. The present experimental data can easily be reproduced by the analysis when the thermal proton impact excitation is taken into account. The importance of the proton impact excitation is also experimentally verified by injecting an iron pellet into the LHD plasmas and changing the ratio of the proton density to the electron density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Clustering aspects in nuclear structure functions

For understanding an anomalous nuclear effect experimentally observed for the beryllium-9 nucleus at the Thomas Jefferson National Accelerator Facility, clustering aspects are studied in structure functions of deep inelastic lepton-nucleus scattering by using momentum distributions calculated in antisymmetrized (or fermionic) molecular dynamics (AMD) and also in a simple shell model for comparison. According to AMD, the {sup 9}Be nucleus consists of two {alpha}-like clusters with a surrounding neutron. The clustering produces high-momentum components in nuclear wave functions, which affects nuclear modifications of the structure functions. We investigated whether clustering features could appear in the structure function F{sub 2} of {sup 9}Be along with studies for other light nuclei. We found that nuclear modifications of F{sub 2} are similar in both AMD and shell models within our simple convolution description although there are slight differences in {sup 9}Be. It indicates that the anomalous {sup 9}Be result should be explained by a different mechanism from the nuclear binding and Fermi motion. If nuclear-modification slopes d(F{sub 2}{sup A}/F{sub 2}{sup D})/dx are shown by the maximum local densities, the {sup 9}Be anomaly can be explained by the AMD picture, namely by the clustering structure, whereas it certainly cannot be described in the simple shell model. This fact suggests that the large nuclear modification in {sup 9}Be should be explained by large densities in the clusters. For example, internal nucleon structure could be modified in the high-density clusters. The clustering aspect of nuclear structure functions is an unexplored topic which is interesting for future investigations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Generation of Dicke states using adiabatic passage

Entangled states of two ions are realized by using an adiabatic process. Based on the proposal by Linington and Vitanov [Phys. Rev. A 77, 010302 (2008)], we have generated Dicke states in optical qubits of two {sup 40}Ca{sup +} ions by applying frequency-chirped optical pulses with time-dependent envelopes to perform rapid adiabatic passage on sideband transitions. One of the biggest advantages of adiabatic approaches is their robustness against variations in experimental parameters, which is verified by performing experiments for different pulse widths or peak Rabi frequencies. Fidelities exceeding 0.5, which is the threshold for inseparable states, are obtained over wide ranges of parameter values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic approach to glass-forming ability of water-quenched Pd-P-based and Pt{sub 60}Ni{sub 15}P{sub 25} bulk metallic glasses

Despite its importance, a thermodynamic approach to determining the glass-forming ability (GFA) of bulk metallic glass (BMG) remains a goal to be achieved. We examined the GFA of water-quenched Pd-P-based and Pt{sub 60}Ni{sub 15}P{sub 25} BMG's in which their molten alloys were sufficiently treated with a dehydrated B{sub 2}O{sub 3} flux prior to and during quenching to room temperature. This allowed us to envisage the applicability of the classical steady-state homogeneous nucleation theory because the suppression of heterogeneous nucleation worked effectively. GFA was examined by comparing the critical cooling rate R{sub c}{sup h} for glass formation with the maximum diameter d{sub max} of glass. To calculate R{sub c}{sup h}, the homogeneous nucleation rate I{sub ss}(T), and the growth rate u{sub c}(T) were estimated as functions of the undercooling temperature of molten alloys. Then, the free energy difference {Delta}G{sub L-x}(T) between the liquid and crystalline phases, and the viscosity {eta}(T) of the liquid were experimentally determined while the surface energy {sigma}{sub sL}(T) at the liquid-nucleus interface was estimated by calculation. The d{sub max} of rod BMG's correlated strongly to R{sub c}{sup h} through the relation R{sub c}{sup h} {approx_equal}d{sub max}{sup -3}/10 mm{sup 3} Ks{sup -1}.

36 MATERIALS SCIENCE↗

ION TEMPERATURE AND NON-THERMAL VELOCITY IN A SOLAR ACTIVE REGION: USING EMISSION LINES OF DIFFERENT ATOMIC SPECIES

We have studied the characteristics of the ion thermal temperature and non-thermal velocity in an active region observed by the EUV Imaging Spectrometer onboard Hinode. We used two emission lines of different atomic species (Fe XVI 262.98 A and S XIII 256.69 A) to distinguish the ion thermal velocity from the observed full width at half-maximum. We assumed that the sources of the two emission lines are the same thermal temperature. We also assumed that they have the same non-thermal velocity. With these assumptions, we could obtain the ion thermal temperature, after noting that M{sub sulfur} approx 0.6M{sub iron}. We have carried out the ion thermal temperature analysis in the active region where the photon counts are sufficient (>4500). What we found is as follows: (1) the common ion thermal temperatures obtained by Fe XVI and S XIII are approx2.5 MK, (2) the typical non-thermal velocities are approx13 km s{sup -1}, (3) the highest non-thermal velocities (>20 km s{sup -1}) are preferentially observed between the bright points in Fe XVI, while (4) the hottest material (>3 MK) is observed relatively inside the bright points compared with the highest non-thermal velocity region.

79 ASTRONOMY AND ASTROPHYSICS↗

Green's function for multielectron ions and its application to radiative recombination involving dielectronic recombinations

We propose a general method to calculate the full Green's function of multielectron atomic ions. The key point exists in the usage of L{sup 2} integrable functions as a complete basis set in a finite region together with an optical potential to guaranty the outgoing scattering boundary condition. In such a way, the cumbersome procedure of adjusting boundary conditions in solving the differential Schroedinger equation is avoided. To show the validity of the method, we studied the radiative recombination involving dielectronic recombinations of Be-like Hg (Z=80) ions. The radiative damping effect is taken into account naturally in the present method. The calculated results reproduce well the asymmetric line profile observed in the experiments.

74 ATOMIC AND MOLECULAR PHYSICS↗

Spectroscopic measurements of high frequency plasma in supercritical carbon dioxide

Spectroscopic measurements of high frequency (hf) plasma were performed under high pressure conditions (5 and 7 MPa) and supercritical (sc) CO{sub 2} conditions (8-20 MPa). Temperature evaluated from C{sub 2} Swan bands (d {sup 3}{pi}{sub g}{yields}a {sup 3}{pi}{sub u}) increased from 3600 to 4600 K with an increase in pressure. The first observation of broadening and shifting of the O I line profile (3p {sup 5} P{sub 3,2,1}{yields}3s {sup 5} S{sub 2}{sup 0}) of hf plasma under sc CO{sub 2} conditions was carried out. However, the origin of broadening and the shifting cannot be understood because the present theory explaining them is not valid for such high pressure conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Broad Ion Beam Extraction from Large Bore ECR Ion Source with Cylindrically Comb-Shaped Magnetic Fields Configuration by Feeding Simultaneously 11 to 13 GHz and 2.45 GHz Microwaves

We tried to enlarge the operation window of an electron cyclotron resonance (ECR) ion source for producing the ECR plasma confined by cylindrically comb-shaped magnetic field, and for extracting the broad ion beam under the low pressures and low microwave powers. The magnetic field by permanent magnets constructs ECR zones at different positions for 2.45 GHz and 11 to 13 GHz microwaves, respectively. According to probe measurements, profiles of plasma density and temperature are different for using each single microwave. We conduct production of ECR plasma by launching simultaneously these two frequency microwaves, and obtain flat profiles of the electron density and the electron temperature. These profiles are not achieved by feeding single frequency microwave. It is found that plasma can be controllable on spatial profiles beyond wide operation window of plasma parameters. We conducted preliminary extracting and forming large bore ion beam from this source. We will make this source a part of tandem type ion source for the first stage. We investigated feasibility and hope to realize the device which has wide range operation window in a single device to produce many kinds of ion beams as like to universal source based on ECR ion source.

43 PARTICLE ACCELERATORS↗

Pure Material Vapor Source by Induction Heating Evaporator for an Electron Cyclotron Resonance Ion Source

Multiply charged iron ions are produced from solid pure material in an electron cyclotron resonance (ECR) ion source. We develop an evaporator by using induction heating with the induction coil which is made from bare molybdenum wire and surrounding the pure iron rod. We optimize the shape of induction heating coil and operation of rf power supply. We conduct experiment to investigate reproducibility and stability in the operation and heating efficiency. Induction heating evaporator produces pure material vapor, because materials directly heated by eddy currents have non-contact with insulated materials which are impurity gas sources. The power and the frequency of the induction currents range from 100 to 900 W and from 48 to 23 kHz, respectively. The working pressure is about 10{sup -4} to 10{sup -3} Pa. We measure temperature of iron rod and film deposition rate by depositing iron vapor to crystal oscillator. We confirm stability and reproducibility of evaporator enough to conduct experiment in ECR ion source. We can obtain required temperature of iron under maximum power of power supply. We are aiming the evaporator higher melting point material than iron.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗