Search NASA⌕ Search

Engineering topics

Watkins, Charles E

Publications and source records attributed to Watkins, Charles E.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1956

A method for calculation of free-space sound pressures near a propeller in flight including considerations of the chordwise blade loading

This report presents tabulated values of certain definite integral that are involved in the calculation of near-field propeller noise when the chordwise forces are assumed to be either uniform or of a Dirac delta type. The tabulations are over a wide range of operating conditions and are useful for estimating propeller noise when either the concept of an effective radius or radial distributions of forces are considered. Use of the tabulations is illustrated by several examples of calculated results for some specific propellers.

NOISE↗
NASA NTRS1956

On the Kernel function of the integral equation relating lift and downwash distributions of oscillating wings in supersonic flow

This report treats the Kernel function of the integral equation that relates a known or prescribed downwash distribution to an unknown lift distribution for harmonically oscillating wings in supersonic flow. The treatment is essentially an extension to supersonic flow of the treatment given in NACA report 1234 for subsonic flow. For the supersonic case the Kernel function is derived by use of a suitable form of acoustic doublet potential which employs a cutoff or Heaviside unit function. The Kernel functions are reduced to forms that can be accurately evaluated by considering the functions in two parts: a part in which the singularities are isolated and analytically expressed, and a nonsingular part which can be tabulated.

Watkins, Charles E↗
NASA NTRS1955

On the Kernel function of the integral equation relating the lift and downwash distributions of oscillating finite wings in subsonic flow

This report treats the Kernel function of an integral equation that relates a known prescribed downwash distribution to an unknown lift distribution for a harmonically oscillating finite wing in compressible subsonic flow. The Kernel function is reduced to a form that can be accurately evaluated by separating the Kernel function into two parts: a part in which the singularities are isolated and analytically expressed and a nonsingular part which may be tabulated. The form of the Kernel function for the sonic case (Mach number 1) is treated separately. In addition, results for the special cases of Mach number of 0 (incompressible case) and frequency of 0 (steady case) are given. The derivation of the integral equation which involves this Kernel function is reproduced as an appendix. Another appendix gives the reduction of the form of the Kernel function obtained herein for the three-dimensional case to a known result of Possio for two-dimensional flow. A third appendix contains some remarks on the evaluation of the Kernel function, and a fourth appendix presents an alternate form of expression for the Kernel function.

Watkins, Charles E↗
NASA NTRS1954

Lift and moment coefficients expanded to the seventh power of frequency for oscillating rectangular wings in supersonic flow and applied to a specific flutter problem

Linearized theory for compressible unsteady flow is used to derive the velocity potential and lift and moment coefficients in the form of oscillating rectangular wing moving at a constant supersonic speed. Closed expressions for the velocity potential and lift and moment coefficients associated with pitching and translation are given to seventh power of the frequency. These expressions extend the range of usefulness of NACA report 1028 in which similar expressions were derived to the third power of the frequency of oscillation. For example, at a Mach number of 10/9 the expansion of the potential to the third power is an accurate representation of the potential for values of the reduced frequency only up to about 0.08; whereas the expansion of the potential to the seventh power is an accurate representation for values of the reduced frequency up to about 0.2. The section and total lift and moment coefficients are discussed with the aid of several figures. In addition, flutter speeds obtained in the Mach number range from 10/9 to 10/6 for a rectangular wing of aspect ratio 4.53 by using section coefficients derived on the basis of three-dimensional flow are compared with flutter speeds for this wing obtained by using coefficients derived on the basis of two-dimensional flow.

Nelson, Herbert C↗
NASA NTRS1954

A theoretical study of the effect of forward speed on the free-space sound-pressure field around propellers

The sound-pressure field of a rotating propeller in forward flight in free space is analyzed by replacing the normal-pressure distribution over the propeller associated with thrust and torque by a distribution of acoustic pressure doublets acting at the propeller disk and subject to uniform rectilinear motion. The basic element used to synthesize the field is the pressure field of a concentrated force moving uniformly at subsonic speeds, for which an expression generalizing one of Lamb's for the fixed concentrated force is given. The sound field is expressed by integration over the propeller disk, and also by integration over an effective ring, and is given both for the near pressure field and, in a simpler form, for the far field. Some illustrated examples are calculated and discussed.

Garrick, I E↗
NASA NTRS1953

Considerations on the effect of wind-tunnel walls on oscillating air forces for two-dimensional subsonic compressible flow

This report treats the effect of wind-tunnel walls on the oscillating two-dimensional air forces in a compressible medium. The walls are simulated by the usual method of placing images at appropriate distances above and below the wing. An important result shown is that, for certain conditions of wing frequency, tunnel height, and Mach number, the tunnel and wing may form a resonant system so that the forces on the wing are greatly changed from the condition of no tunnel walls. It is pointed out that similar conditions exist for three-dimensional flow in circular and rectangular tunnels and apparently, within certain Mach number ranges, in tunnels of nonuniform cross section or even in open tunnels or jets.

Runyan, Harry L↗
NASA NTRS1952

Air forces and moments on triangular and related wings with subsonic leading edges oscillating in supersonic potential flow

This analysis treats the air forces and moments in supersonic potential flow on oscillating triangular wings and a series of sweptback and arrow wings with subsonic leading edges and supersonic trailing edges. For the wings undergoing sinusoidal torsional oscillations simultaneously with vertical translations, the linearized velocity potential is derived in the form of a power series in terms of a frequency parameter. This method can be useful for treatment of similar problems for other plan forms and for wings undergoing other sinusoidal motions. For triangular wings, as many terms of such a series expansion as may be derived can be determined; however, the terms after the first few become very cumbersome. Closed expressions that include the reduced frequency to the fifth power, an order which is sufficient for a large class of practical application, are given for the velocity potential and for the components of chordwise section force and moment coefficients. These wings are found to exhibit the possibility of undamped torsional oscillations for certain ranges of Mach number and locations of the axis of rotation. The ranges of these parameters are delineated for triangular wings.

Watkins, Charles E↗
NASA NTRS1951

Effect of aspect ratio on the air forces and moments of harmonically oscillating thin rectangular wings in supersonic potential flow

This report treats the effect of aspect ratio on the air forces and moments of an oscillating flat rectangular wing in supersonic potential flow. The linearized velocity potential for the wing undergoing sinusoidal torsional oscillations simultaneously with sinusoidal vertical translations is derived in the form of a power series in terms of a frequency parameter. The series development is such that the differential equation for the velocity potential is satisfied to the required power of the frequency parameter considered and the linear boundary conditions are satisfied exactly. The method of solution can be utilized for other plan forms, that is, plan forms for which certain steady-state solutions are known.

Watkins, Charles E↗
NASA NTRS1950

Flutter of a uniform wing with an arbitrarily placed mass according to a differential-equation analysis and a comparison with experiment

A method is presented for the calculation of the flutter speed of a uniform wing carrying an arbitrarily placed concentrated mass. The method, an extension of recently published work by Goland and Luke, involves the solution of the differential equations of motion of the wing at flutter speed and therefore does not require the assumption of specific normal modes of vibration. The order of the flutter determinant to be solved by this method depends upon the order of the system of differential equations and not upon the number of modes of vibration involved. The differential equations are solved by operational methods, and a brief discussion of operational methods as applied to boundary-value problems is included in one of two appendixes. A comparison is made with experiment for a wing with a large eccentrically mounted weight and good agreement is obtained. Sample calculations are presented to illustrate the method; and curves of amplitudes of displacement, torque, and shear for a particular case are compared with corresponding curves computed from the first uncoupled normal modes.

Runyan, Harry L↗
NASA NTRS1947

The Streamline Pattern in the Vicinity of an Oblique Airfoil

A method for determining the streamwise flow pattern of a nonviscous incompressible fluid about an oblique airfoil from the corresponding flow pattern about the airfoil in normal position is presented and illustrated in two examples. The method can be extended to account approximately for compressibility effects by applying the Prandtl-Glauert correction factor to the flow pattern that is normal to the leading edge of the airfoil. The method is expected to be useful in determining the shape of a fuselage or nacelle having a minimum of interference with the flow over a swept-back wing.

Watkins, Charles E↗