Engineering topics

Watters, Thomas R.

Publications and source records attributed to Watters, Thomas R..

10 records

NASA NTRS2018

How Old are Lunar Lobate Scarps? 1. Seismic Resetting of Crater Size-Frequency Distributions

Previous studies have estimated the ages of lunar lobate scarps, some of the youngest tectonic landforms on the Moon, based on the estimated life-times of their fresh morphologies and associated small graben, using crater degradation ages, or via buffered and traditional crater size-frequency distribution (CSFD) measurements. Here, we reexamine five scarps previously dated by Binder and Gunga (1985) with crater degradation ages to benchmark the evaluation of both the buffered and traditional CSFD approaches for determination of absolute model ages (AMAs) at scarps. Both CSFD methods yield similar ages for each individual scarp, indicating that fault activity not only can be measured on the scarp itself, but also in the surrounding terrain - an indication that tectonic activity causes surface renewal both adjacent to and even kilometers distant from scarps. Size-frequency variations in the regions surrounding the scarps are thus useful for studying the extent and severity of the ground motion caused by coseismic slip events during scarp formation. All age determination approaches continue to indicate that lunar lobate scarps were active in the late Copernican, with some scarps possibly experiencing activity within the last 100 Ma.

Lunar Lobate Scarps↗

NASA NTRS2017

Shallow Lunar Seismic Activity and the Current Stress State of the Moon

A vast, global network of more than 3200 lobate thrust fault scarps has been revealed in high resolution Lunar Reconnaissance Orbiter Camera (LROC) images. The fault scarps are very young, less than 50 Ma, based on their small scale and crisp appearance, crosscutting relations with small-diameter impact craters, and rates of infilling of associated small, shallow graben and may be actively forming today. The population of young thrust fault scarps provides a window into the recent stress state of the Moon and offers insight into the origin of global lunar stresses. The distribution of orientations of the fault scarps is non-random, inconsistent with isotropic stresses from late-stage global contraction as the sole source of stress. Modeling shows that tidal stresses contribute significantly to the current stress state of the lunar crust. Tidal stresses (orbital recession and diurnal tides) superimposed on stresses from global contraction result in non-isotropic compressional stress and may produce thrust faults consistent with lobate scarp orientations. At any particular point on the lunar surface, peak compressive stress will be reached at a certain time in the diurnal cycle. Coseismic slip events on currently active thrust faults are expected to be triggered when peak stresses are reached. Analysis of the timing of the 28 the shallow moonquakes recorded by the Apollo seismic network shows that 19 indeed occur when the Moon is closer to apogee, while only 9 shallow events occur when the Moon is closer to perigee. Here we report efforts to refine the model for the current stress state of the Moon by investigating the contribution of polar wander. Progress on relocating the epicentral locations of the shallow moonquakes using an algorithm designed for sparse networks is also reported.

structure↗

NASA NTRS2015

Stratigraphy of the Caloris Basin, Mercury: Implications for Volcanic History and Basin Impact Melt

Caloris basin, Mercury's youngest large impact basin, is filled by volcanic plains that are spectrally distinct from surrounding material. Post-plains impact craters of a variety of sizes populate the basin interior, and the spectra of the material they have excavated enable the thickness of the volcanic fill to be estimated and reveal the nature of the subsurface. The thickness of the interior volcanic plains is consistently at least 2.5 km, reaching 3.5 km in places, with thinner fill toward the edge of the basin. No systematic variations in fill thickness are observed with long-wavelength topography or azimuth. The lack of correlation between plains thickness and variations in elevation at large horizontal scales within the basin indicates that plains emplacement must have predated most, if not all, of the changes in long-wavelength topography that affected the basin. There are no embayed or unambiguously buried (ghost) craters with diameters greater than 10 km in the Caloris interior plains. The absence of such ghost craters indicates that one or more of the following scenarios must hold: the plains are sufficiently thick to have buried all evidence of craters that formed between the Caloris impact event and the emplacement of the plains; the plains were emplaced soon after basin formation; or the complex tectonic deformation of the basin interior has disguised wrinkle-ridge rings localized by buried craters. That low-reflectance material (LRM) was exposed by every impact that penetrated through the surface volcanic plains provides a means to explore near-surface stratigraphy. If all occurrences of LRM are derived from a single layer, the subsurface LRM deposit is at least 7.5-8.5 km thick and its top likely once made up the Caloris basin floor. The Caloris-forming impact would have generated a layer of impact melt 3-15 km thick; such a layer could account for the entire thickness of LRM. This material would have been derived from a combination of lower crust and upper mantle.

Cratering↗

NASA NTRS1991

The nature and origin of periodically spaced tectonic features on Mars

The final report on the nature and origin of periodically spaced tectonic features on Mars is presented. The focus of this investigation was to characterize and model the periodically spaced wrinkle ridges observed in ridged plains material on Mars. The investigation centered on the wrinkle ridges in ridged plains material on the Tharsis Plateau. Wrinkle ridges are interpreted to be structural in origin, resulting from buckling followed by reverse or thrust faulting of the ridged plains material. The study extended beyond Tharsis to other ridged plains units, particularly those in Hesperia Planum. As a corollary, an analysis of the spacing of the anticlinal ridges of the Yakima Fold Belt of the Columbia Plateau in the NW United States was undertaken.

Watters, Thomas R.↗

NASA NTRS1991

Origin of periodically spaced wrinkle ridges on the Tharsis Plateau of Mars

The mechanism responsible for the periodic spacing of wrinkle ridges observed on the Tharsis Plateau of Mars is investigated by examining the characteristics of the spacing of ridges in six major provinces on the plateau; these regions were further divided into domains on the basis of ridge orientation. The ridges are interpreted to be folds resulting from buckling, followed by reverse to thrust faulting (flexure-fracture). Several buckling models that may account for the periodic nature of the ridges are analyzed. The model that would account for the periodic spacing and the asymmetric fold geometry of the ridges involves plastic yielding confined to the hinge area, that would result in rapid closing of the fold and, with continued horizontal shortening, the eventual development of reverse to thrust faulting.

Watters, Thomas R.↗

NASA NTRS1991

Wrinkle ridge-upland scarp transitions: Implications for the mechanical properties of the deformed materials

Wrinkle ridge-upland scarp transitions are structures that occur at the contact between smooth plains material and highlands or uplands materials on the Moon and Mars. In the smooth plains material the structures have a morphology typical of wrinkle ridges, interpreted to be the result of a combination of folding and thrust faulting. Where the structures extend into the uplands, a distinct change in the morphology occurs. The generally asymmetric cross sectional geometry characteristics of wrinkle ridges becomes that of a one-sided, often lobate scarp. The scarp is indistinguishable from other highland/upland scarps, interpreted to be the result of reverse or thrust faulting. Although these structures are rare, they provide important insight into the mechanical properties of deformed materials. These insights are discussed.

Watters, Thomas R.↗

NASA NTRS1991

Wrinkle ridges in the floor material of Kasei Valles, Mars: Nature and origin

Wrinkle ridges on Mars occur almost exclusively in smooth plains material referred to as ridged plains. One of the largest contiguous units of ridged plains occurs on Lunae Planum on the eastern flank of the Tharsis rise. The eastern, western, and northern margins of the ridged plains of Lunae Planum suffered extensive erosion in early Amazonian channel-forming events. The most dramatic example of erosion in early Amazonian plains is in Kasei Valles. The nature an origin of the wrinkle ridges in the floor material of Kasei Valles are discussed.

Watters, Thomas R.↗

NASA NTRS1989

MEVTV Workshop on Tectonic Features on Mars

The state of knowledge of tectonic features on Mars was determined and kinematic and mechanical models were assessed for their origin. Three sessions were held: wrinkle ridges and compressional structure; strike-slip faults; and extensional structures. Each session began with an overview of the features under discussion. In the case of wrinkle ridges and extensional structures, the overview was followed by keynote addresses by specialists working on similar structures on the Earth. The first session of the workshop focused on the controversy over the relative importance of folding, faulting, and intrusive volcanism in the origin of wrinkle ridges. The session ended with discussions of the origin of compressional flank structures associated with Martian volcanoes and the relationship between the volcanic complexes and the inferred regional stress field. The second day of the workshop began with the presentation and discussion of evidence for strike-slip faults on Mars at various scales. In the last session, the discussion of extensional structures ranged from the origin of grabens, tension cracks, and pit-crater chains to the origin of Valles Marineris canyons. Shear and tensile modes of brittle failure in the formation of extensional features and the role of these failure modes in the formation of pit-crater chains and the canyons of Valles Marineris were debated. The relationship of extensional features to other surface processes, such as carbonate dissolution (karst) were also discussed.

Watters, Thomas R.↗

NASA NTRS1988

Wrinkle ridge assemblages on the terrestrial planets

The morphological and dimensional similarities of the structures within the wrinkle ridge assemblages observed on terrestrial planets are investigated, including structures that occur in mare basalts on the moon and in smooth plains on Mars and Mercury. These structures can be classified as either arches or ridges on the basis of morphology, and ridges can be subdivided onto first-, second-, and third-order ridges on the basis of dimensions. Using ridge structures on the Columbia Plateau (U.S.) as analogs, a basis for a structural interpretation of the wrinkle ridge assemblages on the terrestrial planets is established. It is shown that the anticlinal ridges of the Columbia Plateau are appropriate analogs to the first-order ridges, supporting tectonic interpretations for the ridges.

Watters, Thomas R.↗

NASA NTRS1987

Thin and thick-skinned deformation in the Tharsis Region of Mars

The ridge system of the Tharsis Plateau is a dominant structural form equaled only by the radial fracture system. The structural interpretation of the ridges are: (1) folds formed by regional or local compressional stress; (2) the surface manifestation of reverse or thrust faults; or (3) folds with thrust faulting developing as a result of fold geometry. It has been suggested that the compressional events that generated the ridges occurred after the emplacement of the ridged plains volcanic units, but before the episode of faulting that generated the majority of the observed ridge-fault crosscutting relationships on the ridged plains and that it did not continue beyond the emplacement of the Syria Planum Formation or the basal units of the Tharsis Montes Formation. Models for the origin of the regional stresses involving a combination of isostatic uplift and flexural loading were proposed.

Watters, Thomas R.↗