Search NASA⌕ Search

Engineering topics

Way, J. Douglas

Publications and source records attributed to Way, J. Douglas.

At least 19 records

The impact of helium on plasma-driven hydrogen permeation and implications for direct internal recycling in the fusion fuel cycle

Abstract Metal foil pumps (MFPs) are the leading technology for direct internal recycling (DIR) of hydrogen isotopes from the plasma exhaust in future fusion plants. MFPs rely on the concept of superpermeation, where superthermal H atoms directly absorb into the metal foil, rapidly diffuse, and desorb downstream. To date, studies of superpermeation have predominantly employed either pure hydrogen or in some cases trace levels of impurities. The plasma exhaust is expected to contain just ∼1% helium, but in DIR the source gas would be enriched in helium as hydrogen isotopes are extracted. In this work, we explore the impact of helium on hydrogen superpermeation at low temperature (75 °C–200 °C) using Pd-based foils. To first order, the flux scaled linearly with the hydrogen mole fraction. Stable permeation was observed until the helium fraction reached ∼80%, where the flux began to decline slowly with time. In addition, short term (1–5 min) exposure to pure helium plasma significantly attenuated subsequent hydrogen plasma permeation, and the degree was more dramatic at elevated temperature. This attenuation was correlated with He retention in the foils, which was detected by time-of-flight secondary ion mass spectrometry at low levels (<0.1 at. %) and limited to the near surface (<10 nm). Similar trends were observed among all alloys (Pd, PdAg, PdCu), and the foils were restored to full performance with an Ar + sputter clean. The potential for helium plasma exposure to impact MFP performance under these conditions has not been previously reported, and these findings have significant implications to the design and implementation of practical DIR systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Compression in Palladium Alloy Metal Foil Pumps

Metal foil pumps (MFPs) are key components in the direct internal recycling inner fuel cycle loop for the recovery of hydrogen isotopes from deuterium-tritium fusion exhaust. Operating under vacuum conditions, they utilize superthermal hydrogen as the feed gas in a process called superpermeation. A notable feature of MFPs is their ability to pump against a pressure gradient. This study examines the compression capabilities of PdAg and PdCu MFPs at low temperatures with a constant feed pressure of 10 Pa. At 75°C, compression ratios exceeding 200 were readily achieved, with downstream pressures exceeding 4500 Pa using PdCu. For both alloys, net fluxes decreased by only ~15% at downstream pressures of 1000 Pa, which offers potential simplifications for the downstream pump train. Performance declined markedly when the temperature was elevated to 200°C. Pump curves were constructed and advocated as the most appropriate manner to assess MFP performance. Separate pressure-driven-permeation experiments at relevant conditions were conducted, providing a direct measurement of the hydrogen dissociation constant $k$ d , which was found to be in good agreement with the previous literature. Further, these measurements were used to predict pump curves and maximum compression ratios by balancing superpermeation with pressure-driven permeation, achieving excellent agreement with experiment. Last, experiments using asymmetric MFPs revealed the detrimental impact that surface impurities have on performance in this system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct internal recycling fractions approaching unity

Direct internal recycling (DIR) refers to the process of recovering pure hydrogen isotopes (D/T) from helium and other impurities in the fusion plasma exhaust and directing them back to the fuel injection system. Increasing the exhaust fraction purified through DIR significantly reduces the size and cost of the tritium plant and provides additional benefits including reduced requirements for both the tritium startup inventory and tritium breeding ratio. Metal foil pumps (MFPs) are the dominant technology for this separation, relying on the concept of superpermeation. We recently demonstrated that PdCu foils operated at low temperature provide both exceptional flux and resilience to helium absorption as the DIR fraction is increased. Herein we design and demonstrate continuous and semi-batch DIR processes using PdCu MFPs. Under continuous processing, stable performance was observed for DIR fractions up to 92 %. In addition, we demonstrate a semi-batch process capable of extending the DIR fraction to unity (> 99.8 %). Under the experimental conditions described within a PdCu MFP area of ~22 m 2 would be sufficient to process the fusion exhaust with 92 % DIR fraction at expected flowrates of 100 Pa·m 3 ·s -1 for a future fusion power plant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acceleration of Pd-V intermetallic diffusion by hydrogen

Vanadium-based membranes have great potential for hydrogen purification due to their perfect selectivity, high permeability, and relatively low cost. With appropriate surface cleaning, V efficiently permeates hydrogen at elevated temperature, but performance declines due to its affinity to absorb impurities. Here, the application of palladium thin films maintains a clean surface that catalyzes hydrogen dissociation and recombination. Hydrogen permeation in Pd-V-Pd membranes initially reach theoretical permeability, but declines due to Pd-V interdiffusion. The objective of this work was to quantify the intermetallic diffusion process as a function of temperature and ambient. Pd-V composites were subjected to various annealing treatments and characterized using Auger electron spectroscopy, X-ray diffraction, and energy dispersive X-ray spectroscopy, as well as correlated to measurements of membrane permeability. In an inert environment Pd-V interdiffusion was observable as low as 300 °C, and the diffusion coefficient had an activation energy of 44 kJ/mol. Furthermore, the presence of hydrogen at partial pressures > 10 kPa accelerated interdiffusion six-fold at T = 400 °C. Membrane performance degraded with an activation energy 75 kJ/mol, suggesting that intermetallic diffusion leads to both a loss of catalytic activity and as well as degradation of bulk permeability. These findings provide a baseline for evaluating hydrogen permeable interdiffusion barriers to overcome these challenges.

08 HYDROGEN↗

Compact ammonia reforming at low temperature using catalytic membrane reactors

Ammonia is a leading carrier for the storage and transport of renewable hydrogen, but its deployment requires scalable technologies for efficient decomposition and purification. In this work, we report on the efficient delivery of high purity hydrogen from ammonia decomposition using a catalytic membrane reactor (CMR). Improvements to the electroless plating process reduced the Pd membrane thickness by >35%, resulting in commensurate increases in hydrogen permeance without sacrificing selectivity. To increase throughput a commercial Ru/Al 2 O 3 catalyst was added to the lumen, and the CMR could process ammonia flowrates 10–50 times higher than an equivalent packed bed reactor while maintaining the same level of conversion. It is shown that the earth-abundant zeolite clinoptilolite could reduce ammonia impurities in the permeated H 2 to the levels required by PEM fuel cells (<25 ppb). Performance increased significantly across a >500-h durability test due to improvements in membrane permeability. Finally, the results show that CMRs are a viable technology for distributed production of hydrogen from ammonia.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and operational considerations of catalytic membrane reactors for ammonia synthesis

Production of ammonia using hydrogen derived from renewable electricity instead of hydrocarbon reforming would dramatically reduce the carbon footprint of this commodity chemical. Novel technologies such as catalytic membrane reactors may potentially be more compatible with distributed ammonia production than the conventional Haber-Bosch process. Here, a reactor model is developed based on integrating a standard industrial iron catalyst into a catalytic membrane reactor (CMR) equipped with an inorganic membrane that is selective to NH 3 over N 2 /H 2 . CMR performance is studied as functions of wide ranges of membrane properties and operating conditions. Conversion and ammonia recovery are dictated principally by the ammonia permeance, and the benefits by using membranes become significant above 100 GPU = 3.4 × 10 –8 mol m –2 s –1 Pa –1 . To be effective, the CMR requires a minimum selectivity for ammonia of 10 over both nitrogen and hydrogen, and purity scales with the effective selectivity. Increasing the pressure of operation significantly improves all metrics, and at P = 30 bar with a quality membrane ammonia is almost completely recovered, enabling direct recycle of un-reacted hydrogen and nitrogen without need for recompression. Temperature drives conversion and scales monotonically without thermodynamic limitations in a CMR. Alternatively, the temperature may be reduced as low as 300°C while achieving conversion levels surpassing equilibrium limits at T = 400°C in a conventional reactor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ammonia separation from N 2 and H 2 over LTA zeolitic imidazolate framework membranes

LTA type zeolitic imidazolate framework membranes denoted as ZIF-21 were synthesized and evaluated for the separation of a commodity chemical, ammonia, from nitrogen and hydrogen. Membranes were grown using secondary seeded growth. Ammonia permeances were as high as 1727 GPU, with NH 3 /N 2 , and NH 3 /H 2 ideal selectivities of 35, and 12 respectively. ZIF-21 membranes were also evaluated for gas mixtures composed of 13.8:86.2 NH 3 /N 2 and NH 3 /H 2 , with mixture separation selectivities as high as 7.6 for NH 3 /N 2 . Differences in adsorption, and diffusivities were identified as the key separation mechanisms. Specifically, for both gas pairs the polar-polar interaction between ammonia and the linker polar channels, led to the preferential adsorption of ammonia, and therefore favored thermodynamically the separation of ammonia from nitrogen and hydrogen. In addition, for NH 3 /N 2 gas pair, differences in diffusivities was a contributing separation mechanism. For NH 3 /H 2 gas pair, due to the faster hydrogen diffusivity, the kinetic contribution was a strong competing separation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PdAu/YSZ composite hydrogen separation membranes with enhanced stability in the presence of CO

The effects of gold composition on the tolerance of palladium-based composite membranes to CO exposure was studied under the presence of high CO concentrations. Membranes with PdAu compositions ranging up to 41% by mass were exposed to binary 50/50 H 2 /CO gas atmospheres and both hydrogen flux and purity were monitored over time. It was observed that the highest gold composition (41%) suffered no degradation in membrane performance in terms of permeate hydrogen purity and hydrogen permeation flux during the 48 h exposure. Furthermore, for lower gold compositions, X-ray diffraction patterns suggested that carbon entered the film and could be removed by exposure to a non-CO containing gas mixture over time. However, removal of the carbon adversely affected purity; interestingly, some of the purity decline could be reversed upon re-exposure to the CO gas mixture. It is hypothesized that carbon loading in the palladium films causes lattice expansion and may even fill pore defects, thus lowering leaks through the Pd films. Furthermore, this study suggests that a membrane exposed to a CO mixture should not be cycled between CO and non-CO environments, but rather run continuously for best performance. Additionally, the choice of Pd-alloy and metal composition should be considered in regard to its carbon solubility to best predict lifetime performance.

08 HYDROGEN↗

Barium-Promoted Ruthenium Catalysts on Yittria-Stabilized Zirconia Supports for Ammonia Synthesis

The cost-effective, small-scale, distributed synthesis of ammonia depends on effective catalysts and processes that operate under modest elevated pressure (i.e., p < 20 bar) conditions. The present paper considers Ru as the active catalyst supported on yittria-stabilized zirconia (YSZ). The addition of alkali and alkaline-earth metal promoters is found to increase synthesis rates by an order of magnitude. The rate enhancement is largely insensitive to the promoter concentration, with Cs outperforming Ba and K by a factor of 2. However, Ba is found to be stable whereas Cs degrades more rapidly, which is attributed to the low melting point of its oxide. At 400 °C and 1.0 MPa, the specific synthesis rate over Ba–Ru is measured to be approximately 1410 mmol gRu –1 h –1 , higher than the most active oxide-supported Ru catalysts reported in the literature. The rate becomes inhibited by H 2 absorption at low temperature (below 350 °C), but lower H 2 /N 2 ratios enable the rate to remain comparable to what is observed in stoichiometric mixtures at temperatures below 400 °C. The paper reports a new detailed microkinetic model that accurately captures the observed behavior, revealing that adsorption is coverage dependent. Furthermore, these results provide insight and direction into developing alternatives to Haber–Bosch for distributed synthesis of green ammonia.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Ammonia Decomposition in a Catalytic Membrane Reactor To Enable Hydrogen Storage and Utilization

Liquid ammonia is a high density (17.7 wt. %) hydrogen carrier with a well-established production and distribution infrastructure. Efficient decomposition and purification are essential for its use as a hydrogen storage material. Here we demonstrate the production of high purity (> 99.7%) H 2 from NH 3 using a catalytic membrane reactor (CMR) in which a Ru catalyst is impregnated within a porous yttria-stabilized zirconia (YSZ) tube coated with a thin, 6 µm Pd film by electroless deposition. The intimate proximity of catalyst and membrane eliminates transport resistances that limit performance in the conventional packed bed membrane reactor (PBMR) configuration. The addition of a Cs promoter enabled complete NH 3 conversion at temperatures as low as 400°C, exceeding equilibrium constraints without the need for a sweep gas. A reactor model was developed that captured CMR performance with high fidelity. NH 3 decomposition was observed to follow first order kinetics due to efficient H 2 removal. Relative to a comparable PBMR, the Ru loading in the CMR was reduced an order of magnitude and the H 2 recovery increased 35%, enabling record volumetric productivity rates (> 30 mol m-3 s-1) that validate its promise for efficient, compact H 2 delivery from ammonia.

08 HYDROGEN↗

High temperature deuterium enrichment using TiC coated vanadium membranes

Here, the current technology for hydrogen isotope separation requires enormous capital investment and energy consumption. Palladium-based membranes exhibit hydrogen isotope selectivity and provide a continuous method of isotope enrichment but have high material costs. Here, the authors investigate the potential of titanium carbide thin films coated on vanadium as a low-cost alternative, which enabled operation at high temperatures. Protium and deuterium exhibited nominally identical solubility in TiC coated vanadium over a range of 500–700°C. Permeation tests from 600 to 700°C revealed that protium permeated faster than deuterium, with the separation factor decreasing from 1.34 to 1.15 with increasing temperature. XPS depth-profiling showed a distinct interface between the TiC layer and the V foil in as-fabricated membranes. However, post-test analysis revealed significant V diffusion through TiC and segregation to the surface. Surface limitations resulting from this degradation accounted for changes in flux and may explain why the separation factor was lower than the value of 1.42 expected from high temperature interstitial diffusion of protium/deuterium in vanadium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental and Theoretical Insights into the Potential of V 2 O 3 Surface Coatings for Hydrogen Permeable Vanadium Membranes

A grand challenge of vanadium-based H 2 permeable membranes is the development of effective, cheap, and stable catalysts to facilitate H 2 dissociation and recombination. This article investigates a facile air treatment to form catalytically active vanadium oxide on the surfaces of dense vanadium foils. The treatment consisted of short air exposure followed by H 2 reduction at 823 K, which produced a well-faceted and nanocrystalline V 2 O 3 layer on the foil surfaces. The resulting membranes display stable H 2 permeability of 2 ± 0.25 × 10 -8 mol·m -1 ·s -1 ·Pa -0.5 , but transient declines in permeation are observed when operated at both elevated and reduced temperatures. DFT calculations revealed that V 2 O 3 (0001) surfaces display barriers and adsorption energies for H 2 dissociation/recombination that are comparable to known H 2 activation catalysts. It was found that H 2 dissociation is expected to proceed spontaneously on metal-terminated V 2 O 3 , with recombinative-desorption anticipated as the rate limiting step.

08 HYDROGEN↗

Fabrication and operational considerations of hydrogen permeable Mo 2 C/V metal membranes and improvement with application of Pd

Mo 2 C has previously been demonstrated as an effective catalyst layer to enable stable H 2 permeation through vanadium foils at high temperatures. Here, in this paper, this approach was extended to several group V metal foils (V, Nb, and Ta) as well as mixed gas testing. The best permeability was achieved with V, and an activation process was developed to recover the performance of V foils displaying evidence of oxidation. Nb foils yielded ~20% the permeability of V, while Ta was too brittle to operate effectively. Mo 2 C/V membranes were operated at feed conditions well above the ductile-to-brittle transition pressure without embrittlement; however, the H 2 permeability of Mo 2 C/V membranes was significantly attenuated at lower temperatures (< 600 °C). H 2 permeation was also severely inhibited by the presence of N 2 or CO 2 in mixed gas environments due to strong competitive adsorption. The addition of a Pd catalyst layer on top of Mo 2 C improved mixed gas stability and increased H 2 permeability to 2 × 10 -8 mol·m -1 ·s -1 ·Pa -0.5 at 500 °C for V based membranes. Lastly, as an interlayer, Mo 2 C was demonstrated to be a stable barrier preventing Pd-V interdiffusion at 500 °C while simultaneously allowing significant H 2 permeation.

08 HYDROGEN↗

Apparent activation energy for hydrogen permeation and its relation to the composition of homogeneous PdAu alloy thin-film membranes

PdAu alloy composite membranes are often fabricated by sequential electroless plating of Pd and Au, but this forms a layered structure that must be annealed to form a homogenous alloy. Using ex situ analysis techniques such as X-ray diffraction (XRD) or energy dispersive X-ray spectroscopy (EDS) to judge the extent of homogenization can be time-consuming as the composite membranes must be cooled to ambient temperatures prior to analysis. However, an in situ alternative is to use the apparent activation energy for H 2 permeation (E act ). Here in this work, 27 – 41 wt% Au films were fabricated to expand upon a range of 0 – 21 wt% that has been previously reported. Homogenization (confirmed by XRD and EDS) was achieved by heat treatment in 3 MPa H 2 at 550 °C for up to 120 h. The apparent E act was found to initially decrease with increasing Au composition from 12.2 kJ mol -1 (pure Pd) to 7.5 kJ mol -1 (21 wt% Au) after which it slowly increased to 9.0 kJ mol -1 (41 wt% Au). The two distinct regimes can be explained using the relation E act = ΔH H + E D , wherein E act is the sum of the partial enthalpy of solution of H into the PdAu alloy (ΔH H ) and the activation energy for diffusion of H in the alloy (E D ). Essentially, the two components of E act have opposite signs that counteract each other and cause a non-linear trend with increasing Au compositions.

42 ENGINEERING↗