Search NASA⌕ Search

Engineering topics

Weck, Marcus

Publications and source records attributed to Weck, Marcus.

At least 19 records

Nonorthogonal Cascade Catalysis in Multicompartment Micelles

Multicompartment micelles (MCMs) containing acid and base sites in discrete domains are prepared from poly(norbornene)-based amphiphilic bottlebrush copolymers in aqueous media. Here, the acid and base sites are localized in different compartments of the micelle, enabling the nonorthogonal reaction sequence: deacetalization – Knoevenagel condensation – Michael addition of acetals to 2-amino chromene derivatives. Computational simulations using dissipative particle dynamics (DPD) elucidated the bottlebrush composition required to effectively site-isolate the nonorthogonal catalysts. This contribution presents MCMs as a new class of nanostructures for one-pot multistep nonorthogonal cascade catalysis, laying the groundwork for the isolation of three or more incompatible catalysts to synthesize value-added compounds in a single reaction vessel, in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Polymer Canvas with the Stiffness of the Bone Matrix to Study and Control Mesenchymal Stem Cell Response

Reproducing in vitro the complex multiscale physical features of human tissues creates novel biomedical opportunities and fundamental understanding of cell–environment interfaces and interactions. While stiffness has been recognized as a key driver of cell behavior, systematic studies on the role of stiffness have been limited to values in the KPa–MPa range, significantly below the stiffness of bone. Here, in this work, a platform enabling the tuning of the stiffness of a biocompatible polymeric interface up to values characteristic of human bone is reported, which are in the GPa range, by using extremely thin polymer films on glass and cross-linking the films using ultraviolet (UV) light irradiation. It is shown that a higher stiffness is related to better adhesion, proliferation, and osteogenic differentiation, and that it is possible to switch on/off cell attachment and growth by solely tuning the stiffness of the interface, without any surface chemistry or topography modification. Since the stiffness is tuned directly by UV irradiation, this platform is ideal for rapid and simple fabrication of stiffness patterns and gradients, thus representing an innovative tool for combinatorial studies of the synergistic effect of tissue environmental cues on cell behavior, and creates new opportunities for next-generation biosensors, single-cell patterning, and lab-on-a-chip devices.

60 APPLIED LIFE SCIENCES↗

Customized metallodielectric colloids and their behavior in dielectrophoretic fields

A synthetic strategy for fabricating colloidal particles with spatially segregated amine-functionalized lobes enables regioselective coating with gold to afford metallodielectric particles with a variety of shapes and lobe sizes. This approach can produce either dissymmetric dumbbell-shaped two-lobed Au-TPM particles (Au-T) or dissymmetric or symmetric three-lobed particles with gold coating on one (Au-T-T and T-Au-T) or two lobes (Au-T-Au). Dielectrophoretic (DEP) forces exerted by an AC field confined between two opposing electrodes generate aggregates ranging from 1D chains to 2D close-packed lattices, depending on the particle shape and lobe arrangement. Furthermore, the aggregate structures reflect the lowest energy configurations resulting from the induced dipole moments created in particle lobes within the confined electric field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoresponsive Azobenzene-Functionalized Shell Cross-Linked Micelles for Selective Asymmetric Transfer Hydrogenation

We describe the substrate-selective asymmetric transfer hydrogenation of aromatic ketones using rhodium complexes immobilized on a photoresponsive nanoreactor. The nanoreactor is based on multifunctional amphiphilic poly(2-oxazoline)s that are covalently cross-linked with functionalized azobenzene after micelle formation in water. The nanoreactor switches its morphology upon light irradiation in a wavelength-selective manner as confirmed by dynamic light scattering. Kinetic studies show that the gated behavior induced by the phototriggered reversible isomerization of trans- azobenzene to cis- azobenzene in the cross-linking layer is key to discriminate among substrates and reagents during catalysis. Under UV light irradiation, the diffusion of larger substrates into the core is slower in comparison to smaller substrates. The nanoreactor displays substrate selectivity, converting smaller ketone-substrates faster to the corresponding secondary alcohols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compartmentalisation of molecular catalysts for nonorthogonal tandem catalysis

The development of nonorthogonal tandem catalysis enables the use of a combination of arbitrary catalysts to rapidly synthesize complex products in a substainable, efficient, and timely manner. The key is to compartmentalise the molecular catalysts, thereby overcoming inherent incompatibilities between individual catalysts or reaction conditions. This tutorial review analyses the development of the past two decades in the field of nonorthogonal tandem catalysis with an emphasis on compartmentalisation strategies. Here, we highlight design principles of functional materials for compartmentalisation and suggest future directions in the field of nonorthogonal tandem catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Assembled Thermoresponsive Molecular Brushes as Nanoreactors for Asymmetric Aldol Addition in Water

The manipulation and tunability of self-assembled block copolymers through external stimuli presents an attractive strategy to develop smart polymer-based nanoreactors as supports for non-orthogonal tandem catalysis. We report on thermoresponsive core-shell micelles based on poly[norbornene-poly(2-methyl-2-oxazoline-block-2-propyl-2-oxazoline)]-graft-poly[norbornene L-proline] (P[NB-P(MeOx-b-PropOx)]-graft-P[NB-L-proline]) as catalyst supports for L-proline. These molecular brushes exhibit large differences in lower critical solution temperature behavior and nanostructure size in water depending on the chain-lengths and proline connectivity. L-Proline-mediated aldol reactions expose the efficiency by which the molecular brushes self-assemble into micelles. Molecular brushes with an extended backbone show higher activity and selectivity, suggesting better core-shell segregation of the micelles and exclusion of water from the catalytic site. Catalytic efficiencies are not improved above the cloud point temperature, the catalytic be-havior is rather sensitive to conformational changes of the polymer chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compartmentalization and Photo-Regulating Pathways for Incompatible Tandem Catalysis

This contribution describes an advanced compartmentalized micellar nanoreactor that possesses a reversible photoresponsive feature and its application towards photo-regulating reaction pathways for incompatible tandem catalysis under aqueous conditions. The smart nanoreactor is based on multi-functional amphiphilic poly(2-oxazoline)s and covalently crosslinked with spiropyran upon micelle formation in water. It responds to light irradiation in a wavelength-selective manner switching its morphology as confirmed by dynamic light scattering and cryo-transition electron microscopy. The compartmental structure renders distinct nanoconfinements for two incompatible enantioselective transformations: a rhodium-diene complex-catalyzed asymmetric 1,4-addition occurs in the hydrophilic corona while a Rh-TsDPEN-catalyzed asymmetric transfer hydrogenation proceeds in the hydrophobic core. Control experiments and kinetic studies showed that the gated behavior induced by the photo-triggered reversible spiropyran to merocyanine transition in the cross-linking layer is key to discriminate among substrates/reagents during the catalysis. Here, the smart nanoreactor realized photo-regulation to direct the reaction pathway to give a multi-chiral product with high conversions and perfect enantioselectivities in aqueous media. Our SCM catalytic system, on a basic level, mimics the concepts of compartmentalization and responsiveness Nature uses to coordinate thousands of incompatible chemical transformations into streamlined metabolic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two‐Dimensional (2D) or Quasi‐2D Superstructures from DNA‐Coated Colloidal Particles

Abstract This contribution describes the synthesis of colloidal di‐patch particles functionalized with DNA on the patches and their assembly into colloidal superstructures via cooperative depletion and DNA‐mediated interactions. The assembly into flower‐like Kagome, brick‐wall like monolayer, orthogonal packed single or double layers, wrinkled monolayer, and colloidal honeycomb superstructures can be controlled by tuning the particles’ patch sizes and assembly conditions. Based on these experimental results, we generate an empirical phase diagram. The principles revealed by the phase diagram provide guidance in the design of two‐dimensional (2D) materials with desired superstructures. Our strategy might be translatable to the assembly of three‐dimensional (3D) colloidal structures.

Liu, Mingzhu↗

Two‐Dimensional (2D) or Quasi‐2D Superstructures from DNA‐Coated Colloidal Particles

Abstract This contribution describes the synthesis of colloidal di‐patch particles functionalized with DNA on the patches and their assembly into colloidal superstructures via cooperative depletion and DNA‐mediated interactions. The assembly into flower‐like Kagome, brick‐wall like monolayer, orthogonal packed single or double layers, wrinkled monolayer, and colloidal honeycomb superstructures can be controlled by tuning the particles’ patch sizes and assembly conditions. Based on these experimental results, we generate an empirical phase diagram. The principles revealed by the phase diagram provide guidance in the design of two‐dimensional (2D) materials with desired superstructures. Our strategy might be translatable to the assembly of three‐dimensional (3D) colloidal structures.

Liu, Mingzhu↗

Cost and Time Effective Lithography of Reusable Millimeter Size Bone Tissue Replicas With Sub‐15 nm Feature Size on A Biocompatible Polymer

Abstract The ability to replicate the microenvironment of biological tissues creates unique biomedical possibilities for stem cell applications. Current fabrication methods are limited by either the control on feature size and shape, or by the throughput and size of the replicas. Here, a novel platform is reported that combines thermal scanning probe lithography (tSPL) with innovative methodologies for the low‐cost and high‐throughput nanofabrication of large area quasi‐3D bone tissue replicas with high fidelity, sub‐15 nm lateral precision, and sub‐2 nm vertical resolution. This bio‐tSPL platform features a biocompatible polymer resist that withstands multiple cell culture cycles, allowing the reuse of the replicas, further decreasing costs and fabrication times. The as‐fabricated replicas support the culture and proliferation of human induced mesenchymal stem cells, which display broad therapeutic and biomedical potential. Furthermore, it is demonstrated that bio‐tSPL can be used to nanopattern the bone tissue replicas with amine groups, for subsequent tissue‐mimetic biofunctionalization. The achieved level of time and cost‐effectiveness, as well as the cell compatibility of the replicas, make bio‐tSPL a promising platform for the production of tissue‐mimetic replicas to study stem cell‐tissue microenvironment interactions, test drugs, and ultimately harness the regenerative capacity of stem cells and tissues for biomedical applications.

Liu, Xiangyu↗

Quantifying patterns in optical micrographs of one- and two-dimensional ellipsoidal particle assemblies

Current developments in colloidal science include the assembly of anisotropic colloids with broad geometric diversity. As the complexity of particle assemblies increases, the need for ubiquitous algorithms that quantitatively analyze images of the assemblies to deliver key information such as quantification of crystal structures becomes more urgent. This contribution describes algorithms capable of image analysis for classifying colloidal structures based on abstracted interparticle relationship information and quantitatively analyzing the abundance of each structure in mixed pattern assemblies. The algorithm parameters can be adjusted, allowing for the algorithms to be adapted for different image analyses. Three different ellipsoidal particle assembly images are presented to demonstrate the effectiveness of the algorithms: a one-dimensional (1D) particle chain assembly and two two-dimensional (2D) polymorphic crystals each consisting of assemblies of two distinct plane symmetry groups. Angle relationships between neighbouring particles are calculated and neighbour counts of each particle are determined. Combining these two parameters as rules for classification criteria allows for the labeling and quantification of each particle into a defined symmetry class within an assembly. The algorithms provide a labelled image comprising classification results and particle counts of each defined class. For multiple images or individual frames from a video, the script can be looped to achieve automatic processing. The yielded classification data allow for more in-depth image analysis of mixed pattern particle assemblies. Finally, we envision that these algorithms will have utility in quantitative analysis of images comprising ellipsoidal colloidal materials, nanoparticles, or biological matter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗