Search NASA⌕ Search

Engineering topics

Weck, Philippe F.

Publications and source records attributed to Weck, Philippe F..

At least 19 records

Structural and Spectroscopic Properties of Butanediol-Modified Boehmite Materials

Glycoboehmite (GB) materials are synthesized by a solvothermal reaction to form layered aluminum oxyhydroxide (boehmite) modified by intercalated butanediol molecules. These hybrid materials offer a platform to design materials with potentially novel sorption, wetting, and catalytic properties. Several synthetic methods have been used, resulting in different structural and spectroscopic properties, but atomistic detail is needed to determine the interlayer structure to explore the synthetic control of GB materials. Here, in this study, we use classical molecular dynamics (MD) simulations to compare the structural properties of GB interlayers containing chemisorbed butanediol molecules as a function of diol loading. Accompanying quantum (density functional theory, DFT) static calculations and MD simulations are used to validate the classical model and compute the infrared spectra of various models. Classical MD results reveal the existence of two unique interlayer environments at higher butanediol loading, corresponding to smaller (cross-linked) and expanded interlayers. DFT-computed infrared spectra reveal the sensitivity of the aluminol O–H stretch frequencies to the interlayer environment, consistent with the spectrum of the synthesized material. Insight from these simulations will aid in the characterization of the newly synthesized GB materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-temperature chromium diffusion in austenitic stainless steel: Ab initio molecular dynamics simulations

Chromium self-diffusion through stainless steel (SS) matrix and along grain boundaries is an important mechanism controlling SS structural materials corrosion. For this work, Cr diffusion in austenitic SS was simulated using canonical ab initio molecular dynamics with realistic models of type-316 SS bulk, with and without Cr vacancies, and a low-energy Σ3 twin boundary typically observed at active corrosion sites. Cr self-diffusion coefficients at 750 and 850 °C calculated using Einstein’s diffusion equation are 4.2 × 10 –6 and 8.1 × 10 –6 Å 2 ps –1 in pristine bulk, 3.8 × 10 –3 and 5.5 × 10 –3 Å 2 ps –1 in bulk including Cr vacancies, and 9.5 × 10 –2 and 1.0 × 10 –1 Å 2 ps –1 at a Σ3[1 1 1]60° twin boundary.

36 MATERIALS SCIENCE↗

Pressure-induced phase transformations in Nb 2 O 5 from ab initio molecular dynamics simulations

Here, the equations of state for the H-, L- and T-Nb 2 O 5 polymorphs were investigated with density functional theory. The shock Hugoniot curves were predicted from ab initio molecular dynamics simulations along 300–2500 K isotherms. Enthalpies derived from simulations at 300 K show that the H → L transition occurs at 6.2 GPa, in agreement with the measured value of ~5.9 GPa, and is more favorable than the H → T transition. Pressure-induced amorphization (PIA) of L-Nb 2 O 5 is in the range ~18-25 GPa, consistent with experiments reporting PIA above 21.4 GPa. The simulated PIA of T-Nb 2 O 5 between ~16 and 26 GPa reproduces PIA observed above 19.2 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymorphism and phase transitions in Na 2 U 2 O 7 from density functional perturbation theory

Polymorphism and phase transitions in sodium diuranate, Na 2 U 2 O 7 , are investigated with density functional perturbation theory (DFPT). Thermal properties of crystalline α-, β- and γ-Na 2 U 2 O 7 polymorphs are predicted from DFPT phonon calculations, i.e., the first time for the high-temperature γ-Na 2 U 2 O 7 phase (R$\bar{3}$ with combining macron]m symmetry). The standard molar isochoric heat capacities predicted within the quasi-harmonic approximation are C p (298.15K)= 219.4 and 220.9 J K -1 mol -1 mfor P21/a α-Na 2 U 2 O 7 and C2/m β-Na 2 U 2 O 7 , respectively. Gibbs free energy calculations reveal that α-Na 2 U 2 O 7 (P2 1 /a) and β-Na 2 U 2 O 7 (C2/m) are almost energetically degenerate at low temperature, with β-Na 2 U 2 O 7 becoming slightly more stable than α-Na 2 U 2 O 7 as temperature increases. Here these findings are consistent with XRD data showing a mixture of α and β phases after cooling of γ-Na 2 U 2 O 7 to room temperature and the observation of a sluggish α → β phase transition above ca. 600 K. A recently observed α-Na 2 U 2 O 7 structure with P21 symmetry is also shown to be metastable at low temperature. Based on Gibbs free energy, no direct β → γ solid-solid phase transition is predicted at high temperature, although some experiments reported the existence of such phase transition around 1348 K. This, along with recent experiments, suggests the occurrence of a multi-step process consisting of initial β-phase decomposition, followed by recrystallization into γ-phase as temperature increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational and Experimental Investigation of Thermal-Mechanical- Chemical Mechanisms of High-burnup Spent Nuclear Fuel (SNF) Processes at Elevated Temperatures and Degradation Behavior in Geologic Repositories

The overarching goal of the combined computational and experimental R&D activities proposed in this project is to enhance understanding of the mechanisms and thermal-mechanical-chemical (TMC) parameters controlling the instant release fraction (IRF) and matrix dissolution of high-burnup (HB; burnup) spent nuclear fuels (SNFs) and the subsequent formation, stability, and phase transformations of SNF alteration products under long-term storage and geological disposal conditions. Uranium dioxide may undergo oxidative corrosion/alteration, and the IRF may be increased for HB SNF, both of which may affect environmental systems associated with SNF long-term storage and disposal. The oxidative matrix dissolution may form various complex uranyl-based phases, including a rich variety of oxides, silicates, carbonates and other secondary minerals in varied geological environments (e.g., studtite, metastudtite, amorphous uranyl peroxide, uranium trioxide, triuranium octoxide, schoepite, dehydrated schoepite, metaschoepite, becquerelite, soddyite, rutherfordine,...). These uranyl phases generally have higher mobility UO 2 +2 species than less soluble U 4+ phases. However, limited information on the thermodynamic properties and formation kinetics of these uranyl-bearing phases is available to predict explicitly paragenesis under the conditions relevant to long-term storage or disposal. The proposed project draws on complementary expertise and research backgrounds from the team members: (i) to apply a combined ab initio modeling (UNLV/UTEP and SNL) and experimental (UNLV) strategy investigating the high-temperature TMC mechanisms of alteration of SNF under α-radiolysis conditions; (ii) to investigate the mechanistic of phase transformations in UNF degradation products under various conditions expected in long-term storage systems (e.g. (UO 2 )O 2 (H 2 O) 4 → (UO 2 )O 2 (H 2 O) 2 → U 2 O 7 → UO 3 → U 3 O 8 ); (iii) to determine high-accuracy TMC parameters for complex uranyl-based phases formed in storage or geological disposal environments (e.g. UO 3 (H 2 O) 2 , Ca[(UO 2 ) 6 O 4 (OH) 8 ] 8 H 2 O, (UO 2 ) 2 (SiO 4 ) 3 2H 2 O,…). The unforeseen COVID-19 pandemic led to the laboratory/campus closure since March 2020, that resulted in a significant delay in reaching milestones in a satisfactory manner, due to (i) the statewide recommendation from stop-working to later limited work in the lab and work-from-home (WFH), (ii) no in-person interactions, and (iii) a hiring freeze at UNLV. Therefore, a no cost extension (10/01/2021- 9/30/2022) was requested to help make up the time we lost during the global pandemic in 2020-2021, leading to paradigm shifts in the focus of the project in the following three main tasks: Task 1 (Computational), Task 2 (Experimental), and Task 3 (Final report, due on 12/29/2022).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electron emission from bromouracil and uracil induced by protons and radiosensitization

Absolute double differential cross sections (DDCS) of electrons emitted from uracil and 5-bromouracil (BrU) in collisions with protons of energy 200 keV have been measured for various forward and backward emission angles over wide range of electron energies. The measured DDCS are compared with the continuum distorted wave-eikonal initial state (CDW-EIS) calculations. The optimized structure of the BrU was estimated along with the population analysis of all the occupied orbitals using a self-consistent field density. A comparison between the measured DDCS data for the two molecules show that the cross section of low energy electrons emitted from BrU is substantially larger than that for uracil. The BrU-to-uracil DDCS ratios obtained from the present measurements indicate an enhancement of the electron emission by a factor which is as large as 2.0 to 2.5. These electrons being the major agent for damaging the DNA/RNA of the malignant tissues, the present results are expected to provide an important input for the radiosensitization effect in hadron therapy. It is noteworthy to mention that the CDW-EIS calculations for Coulomb ionization cannot predict such enhancement. A large angular asymmetry is observed for uracil with a broad structure, which is absent in case of BrU.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modeling Activities Related to Waste Form Degradation: Progress Report

This report represents the milestone deliverable M4SF-22SN010309092 “Modeling Activities Related to Waste Form Degradation: Progress Report” that describes the progress of R&D activities of ongoing modeling investigations specifically on nuclear waste glass degradation, Density Functional Theory (DFT) studies on clarkeite structure and stability, and electrochemical model development of spent nuclear fuel (SNF). These activities are part of the Waste Form Testing, Modeling, and Performance work package at Sandia National Laboratories (SNL). This work package is part of the “Inventory and Waste Form Characteristics and Performance” control account that includes various experimental and modeling activities on nuclear waste degradation conducted at Oak Ridge National Laboratory (ORNL), SNL, Argonne National Laboratory (ANL), and Pacific Northwest National Laboratory (PNNL).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of excess Mg to control corrosion in molten MgCl 2 and KCl eutectic salt mixture

Structural alloys may experience corrosion when exposed to molten chloride salts due to selective dissolution of active alloying elements. One way to prevent this is to make the molten salt reducing. For the KCl + MgCl 2 eutectic salt mixture, pure Mg can be added to achieve this. However, Mg can form intermetallic compounds with nickel at high temperatures, which may cause alloy embrittlement. This work shows that an optimum level of excess Mg could be added to the molten salt which will prevent corrosion of alloys like 316 H, while not forming any detectable Ni-Mg intermetallic phases on Ni-rich alloy surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-Resolution Characterization of the Coupling Effects of Molten Salts, High Temperature and Irradiation on Intergranular Fracture

This project focused on providing a fundamental physico-chemical understanding of the coupling mechanisms of corrosion- and radiation-induced degradation at material-salt interfaces in Ni-based alloys operating in emulated Molten Salt Reactor(MSR) environments through the use of a unique suite of aging experiments, in-situ nanoscale characterization experiments on these materials, and multi-physics computational models. The technical basis and capabilities described in this report bring us a step closer to accelerate the deployment of MSRs by closing knowledge gaps related to materials degradation in harsh environments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Electron emission from fluorene (C 13 H 10 ) upon 3.5 MeV/u Si 8+ ion impact: double differential distributions

In this work, we have studied the electron emission from one of the polycyclic aromatic hydrocarbon (PAH) molecules namely, fluorene (C13H10), upon 3.5 MeV/u Si8+ ion impact. The experimentally measured absolute double differential cross sections (DDCS) are compared with the continuum distorted wave-eikonal initial state (CDW-EIS) model and the first Born approximation including correct boundary conditions (CB1). The measurements are carried out in the ejected e⁻-energy range of 1 eV–400 eV and in the angular range of 20°–160°. We have obtained the single differential and the total cross sections (TCSs) of e⁻-emission as well. The CB1 calculation largely underestimates the data. The CDW-EIS model, which is applied for the PAH molecule for the first time, provides an overall better agreement with the double differential, single differential and TCS data. The DDCS data for fluorene has also been compared with that for CH4 molecule, at a few angles. The forward–backward angular asymmetry shows a relatively flatter distribution compared to the theoretical predictions. The contribution due to the giant plasmon resonance could not be clearly observed except a mild indication in the asymmetry parameter. The angular distribution of the carbon KLL Auger electron cross section shows certain variations. The study of the KLL hyper-satellite component indicates the double K-ionization cross section is about 8.6% of the single K-ionization one.

74 ATOMIC AND MOLECULAR PHYSICS↗

OWL and Waste Form Characteristics (Annual Status Update)

This report represents completion of milestone deliverable M2SF-21SN010309012 “Annual Status Update for OWL and Waste Form Characteristics” that provides an annual update on status of fiscal year (FY 2020) activities for the work package SF-20SN01030901 and is due on January 29, 2021. The Online Waste Library (OWL) has been designed to contain information regarding United States (U.S.) Department of Energy (DOE)-managed (as) high-level waste (DHLW), spent nuclear fuel (SNF), and other wastes that are likely candidates for deep geologic disposal, with links to the current supporting documents for the data (when possible; note that no classified or official-use-only (OUO) data are planned to be included in OWL). There may be up to several hundred different DOE-managed wastes that are likely to require deep geologic disposal. This draft report contains versions of the OWL model architecture for vessel information (Appendix A) and an excerpt from the OWL User’s Guide (Appendix B and SNL 2020), which are for the current OWL Version 2.0 on the Sandia External Collaboration Network (ECN).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

OWL Change Control Process

The Online Waste Library (OWL) provides a consolidated source of information on Department of Energy-managed radioactive waste likely to require deep geologic disposal. With the release of OWL Version 1.0 in fiscal year 2019 (FY2019), much of the FY2020 work involved developing the OWL change control process and the OWL release process. These two processes (in draft form) were put into use for OWL Version 2.0, which was released in early FY2021. With the knowledge gained, the OWL team refined and documented the two processes in two separate reports. This report focuses on the change control process and discusses the following: (1) definitions and system components; (2) roles and responsibilities; (3) origin of changes; (4) the change control process including the Change List, Task List, activity categories, implementation examples, and checking and review; and (5) the role of the re lease process in ensuring changes in the Change List are incorporated into a public release.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗