Search NASA⌕ Search

Engineering topics

Wei, Liu

Publications and source records attributed to Wei, Liu.

At least 37 records · Page 2

Crystal structure and magnetic properties of NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl]

A new copper(II) oxide phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], has been synthesized by flux synthesis. Single-crystal X-ray diffraction data show that the title compound crystallizes in the monoclinic system, space group P2{sub 1}/c (No. 14), with lattice parameters a=8.392(2) A, b=6.3960(10) A, c=16.670(2) A, {beta}=109.470(10) Degree-Sign , V=843.6(3) A{sup 3}, Z=4. The crystal structure is characterized by a complex chain of copper-centered polyhedra running along [0 1 0] which are connected by phosphate tetrahedra. The resulting three-dimensional polyhedra framework exhibits channels filled by additional copper and sodium atoms. Field and temperature dependent measurements of the specific heat and the magnetic susceptibility reveal low-dimensional magnetic behavior. The compound starts to decompose at 700 K under release of oxygen and evaporation of Cu{sup I}Cl as shown by simultaneous thermogravimetry and mass spectrometry. - Graphical abstract: The crystal structure of the new copper(II) phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], exhibits linear chains of copper tetrahedra which show low-dimensional magnetic behavior proven by specific heat and magnetic susceptibility measurements. Highlights: Black-Right-Pointing-Pointer A new copper(II) oxide phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], has been synthesized by flux synthesis. Black-Right-Pointing-Pointer The crystal structure comprises chains of Cu{sub 4}O tetrahedra. Black-Right-Pointing-Pointer Low-dimensional behavior has been proven by magnetic and specific heat measurements. Black-Right-Pointing-Pointer On heating, Cu{sup I}Cl and oxygen are released shown by simultaneous thermogravimetry and mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

QUASI-PERIODIC FAST-MODE WAVE TRAINS WITHIN A GLOBAL EUV WAVE AND SEQUENTIAL TRANSVERSE OSCILLATIONS DETECTED BY SDO/AIA

We present the first unambiguous detection of quasi-periodic wave trains within the broad pulse of a global EUV wave (so-called EIT wave) occurring on the limb. These wave trains, running ahead of the lateral coronal mass ejection (CME) front of 2-4 times slower, coherently travel to distances {approx}> R{sub Sun }/2 along the solar surface, with initial velocities up to 1400 km s{sup -1} decelerating to {approx}650 km s{sup -1}. The rapid expansion of the CME initiated at an elevated height of 110 Mm produces a strong downward and lateral compression, which may play an important role in driving the primary EUV wave and shaping its front forwardly inclined toward the solar surface. The wave trains have a dominant 2 minute periodicity that matches the X-ray flare pulsations, suggesting a causal connection. The arrival of the leading EUV wave front at increasing distances produces an uninterrupted chain sequence of deflections and/or transverse (likely fast kink mode) oscillations of local structures, including a flux-rope coronal cavity and its embedded filament with delayed onsets consistent with the wave travel time at an elevated (by {approx}50%) velocity within it. This suggests that the EUV wave penetrates through a topological separatrix surface into the cavity, unexpected from CME-caused magnetic reconfiguration. These observations, when taken together, provide compelling evidence of the fast-mode MHD wave nature of the primary (outer) fast component of a global EUV wave, running ahead of the secondary (inner) slow component of CME-caused restructuring.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of robust optimization in intensity-modulated proton therapy with different dose delivery techniques

Purpose: The distal edge tracking (DET) technique in intensity-modulated proton therapy (IMPT) allows for high energy efficiency, fast and simple delivery, and simple inverse treatment planning; however, it is highly sensitive to uncertainties. In this study, the authors explored the application of DET in IMPT (IMPT-DET) and conducted robust optimization of IMPT-DET to see if the planning technique's sensitivity to uncertainties was reduced. They also compared conventional and robust optimization of IMPT-DET with three-dimensional IMPT (IMPT-3D) to gain understanding about how plan robustness is achieved. Methods: They compared the robustness of IMPT-DET and IMPT-3D plans to uncertainties by analyzing plans created for a typical prostate cancer case and a base of skull (BOS) cancer case (using data for patients who had undergone proton therapy at our institution). Spots with the highest and second highest energy layers were chosen so that the Bragg peak would be at the distal edge of the targets in IMPT-DET using 36 equally spaced angle beams; in IMPT-3D, 3 beams with angles chosen by a beam angle optimization algorithm were planned. Dose contributions for a number of range and setup uncertainties were calculated, and a worst-case robust optimization was performed. A robust quantification technique was used to evaluate the plans' sensitivity to uncertainties. Results: With no uncertainties considered, the DET is less robust to uncertainties than is the 3D method but offers better normal tissue protection. With robust optimization to account for range and setup uncertainties, robust optimization can improve the robustness of IMPT plans to uncertainties; however, our findings show the extent of improvement varies. Conclusions: IMPT's sensitivity to uncertainties can be improved by using robust optimization. They found two possible mechanisms that made improvements possible: (1) a localized single-field uniform dose distribution (LSFUD) mechanism, in which the optimization algorithm attempts to produce a single-field uniform dose distribution while minimizing the patching field as much as possible; and (2) perturbed dose distribution, which follows the change in anatomical geometry. Multiple-instance optimization has more knowledge of the influence matrices; this greater knowledge improves IMPT plans' ability to retain robustness despite the presence of uncertainties.

61 RADIATION PROTECTION AND DOSIMETRY↗

FIRST SDO/AIA OBSERVATION OF SOLAR PROMINENCE FORMATION FOLLOWING AN ERUPTION: MAGNETIC DIPS AND SUSTAINED CONDENSATION AND DRAINAGE

Imaging solar coronal condensation forming prominences was difficult in the past, a situation recently changed by Hinode and the Solar Dynamics Observatory (SDO). We present the first example observed with the SDO/Atmospheric Imaging Assembly, in which material gradually cools through multiple EUV channels in a transequatorial loop system that confines an earlier eruption. Nine hours later, this leads to eventual condensation at the dips of these loops, forming a moderate-size prominence of {approx}10{sup 14} g, to be compared to the characteristic 10{sup 15} g mass of a coronal mass ejection (CME). The prominence mass is not static but maintained by condensation at a high estimated rate of 10{sup 10} g s{sup -1} against a comparable, sustained drainage through numerous vertical downflow threads, such that 96% of the total condensation ({approx}10{sup 15} g) is drained in approximately one day. The mass condensation and drainage rates temporally correlate with the total prominence mass. The downflow velocity has a narrow Gaussian distribution with a mean of 30 km s{sup -1}, while the downward acceleration distribution has an exponential drop with a mean of {approx}1/6 g{sub Sun }, indicating a significant canceling of gravity, possibly by the Lorentz force. Our observations show that a macroscopically quiescent prominence is microscopically dynamic, involving the passage of a significant mass through it, maintained by a continual mass supply against a comparable mass drainage, which bears important implications for CME initiation mechanisms in which mass unloading is important.

79 ASTRONOMY AND ASTROPHYSICS↗

Robust optimization of intensity modulated proton therapy

Purpose: Intensity modulated proton therapy (IMPT) is highly sensitive to range uncertainties and uncertainties caused by setup variation. The conventional inverse treatment planning of IMPT optimized based on the planning target volume (PTV) is not often sufficient to ensure robustness of treatment plans. In this paper, a method that takes the uncertainties into account during plan optimization is used to mitigate the influence of uncertainties in IMPT. Methods: The authors use the so-called ''worst-case robust optimization'' to render IMPT plans robust in the face of uncertainties. For each iteration, nine different dose distributions are computed--one each for {+-} setup uncertainties along anteroposterior (A-P), lateral (R-L) and superior-inferior (S-I) directions, for {+-} range uncertainty, and the nominal dose distribution. The worst-case dose distribution is obtained by assigning the lowest dose among the nine doses to each voxel in the clinical target volume (CTV) and the highest dose to each voxel outside the CTV. Conceptually, the use of worst-case dose distribution is similar to the dose distribution achieved based on the use of PTV in traditional planning. The objective function value for a given iteration is computed using this worst-case dose distribution. The objective function used has been extended to further constrain the target dose inhomogeneity. Results: The worst-case robust optimization method is applied to a lung case, a skull base case, and a prostate case. Compared with IMPT plans optimized using conventional methods based on the PTV, our method yields plans that are considerably less sensitive to range and setup uncertainties. An interesting finding of the work presented here is that, in addition to reducing sensitivity to uncertainties, robust optimization also leads to improved optimality of treatment plans compared to the PTV-based optimization. This is reflected in reduction in plan scores and in the lower normal tissue doses for the same coverage of the target volume when subjected to uncertainties. Conclusions: The authors find that the worst-case robust optimization provides robust target coverage without sacrificing, and possibly even improving, the sparing of normal tissues. Our results demonstrate the importance of robust optimization. The authors assert that all IMPT plans should be robustly optimized.

61 RADIATION PROTECTION AND DOSIMETRY↗

Bouncing plasmonic waves in half-parabolic potentials

We introduce a plasmonic analog for the dynamics of a quantum particle under a linear restoring force bouncing off an impenetrable barrier (''quantum paddle ball''). Paddle-ball-type plasmonic potentials are constructed in quadratically modulated metal-dielectric-metal structures with transverse metallic reflecting walls. We show, both analytically and numerically, the full-wave nature of the phenomenon, including plasmon bouncing and complete wave revivals after interference at the boundary. We show that the plasmon paddle-ball dynamics is effectively wavelength independent, opening opportunities for subwavelength manipulations of polychromatic and ultrashort-pulse plasmons.

36 MATERIALS SCIENCE↗

Concise relation of substitution energy to macroscopic deformation in a deformed system

An ab initio study of the effect of macroscopic deformation on energetics of twelve alloying elements in bcc Fe has been performed under three specially designed strain modes. A concise relation of the macroscopic deformation effect on the substitution energy of alloying elements with linear dependences on defect formation volume and relative volume change was found. Based on this concise relationship, the following behaviors can be predicted by comparing defect formation volumes: the strain-induced solubility change of alloying atoms and then the degree or possibility of redistribution and segregation of alloying atoms, the stability transition between monovacancy and divacancy, and self-interstitial atom reorientation under heavy loading.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near-resonant propagation of short pulses in a two-level medium

We present a numerical method for solving the Maxwell-Bloch equations describing pulse propagation for a two-level medium. The method is accurate, efficient, stable, and well suited for this type of simultaneous equations. By applying the numerical scheme we investigate the evolutions of pulse area, pulse propagation, pulse velocity, and spectral shapes under both homogeneous and inhomogeneous broadening conditions. The results show that the area evolution and pulse-reshaping procedure are significantly influenced by detuning and inhomogeneous line shape, which also impact the oscillation tail and pulse peak. In addition, the pulse-peak traces indicated the pulse velocity always increases with greater deviation in pulse-area value from the value 2{pi}. We also demonstrate the pulse velocity increased for a larger detuning or a wider inhomogeneous line shape. Furthermore, the spectral feature shows that pulse spectra evolve into an oscillating shape.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DIRECT IMAGING OF QUASI-PERIODIC FAST PROPAGATING WAVES OF {approx}2000 km s{sup -1} IN THE LOW SOLAR CORONA BY THE SOLAR DYNAMICS OBSERVATORY ATMOSPHERIC IMAGING ASSEMBLY

Quasi-periodic propagating fast mode magnetosonic waves in the solar corona were difficult to observe in the past due to relatively low instrument cadences. We report here evidence of such waves directly imaged in EUV by the new Atmospheric Imaging Assembly instrument on board the Solar Dynamics Observatory. In the 2010 August 1 C3.2 flare/coronal mass ejection event, we find arc-shaped wave trains of 1%-5% intensity variations (lifetime {approx}200 s) that emanate near the flare kernel and propagate outward up to {approx}400 Mm along a funnel of coronal loops. Sinusoidal fits to a typical wave train indicate a phase velocity of 2200 {+-} 130 km s{sup -1}. Similar waves propagating in opposite directions are observed in closed loops between two flare ribbons. In the k-{omega} diagram of the Fourier wave power, we find a bright ridge that represents the dispersion relation and can be well fitted with a straight line passing through the origin. This k-{omega} ridge shows a broad frequency distribution with power peaks at 5.5, 14.5, and 25.1 mHz. The strongest signal at 5.5 mHz (period 181 s) temporally coincides with quasi-periodic pulsations of the flare, suggesting a common origin. The instantaneous wave energy flux of (0.1-2.6) x 10{sup 7} erg cm{sup -2} s{sup -1} estimated at the coronal base is comparable to the steady-state heating requirement of active region loops.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Prediction of formation of cubic boron nitride by construction of temperature-pressure phase diagram at the nanoscale

The size-dependent phase diagram of BN was developed on the basis of the nanothermodynamic theory. Our studied results suggest that cubic BN (c-BN) is more stable than hexagonal BN (h-BN) in the deep nanometer scale and the triple point of c-BN, h-BN and liquid shifts toward the lower temperature and pressure with decreasing the crystal size. Moreover, surface stress, which is determined by the experimental conditions, is the main reason to influence the formation of c-BN nuclei. The developed phase diagram of BN could help us to exploit new techniques for the fabrication of c-BN nanomaterials. - Graphical abstract: The size-dependent phase diagram of BN was developed on the basis of nanothermodynamic theory and it can be used to predict whether cubic BN (c-BN) can be formed at a given condition. Highlights: > Size-dependent phase diagram of BN is constructed. > Cubic BN is more stable than hexagonal BN in the deep nanometer scale. > Formation of nanosized cubic BN depends on surface stress.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Particle energization in 3D magnetic reconnection of relativistic pair plasmas

We present large scale 3D particle-in-cell simulations to examine particle energization in magnetic reconnection of relativistic electron-positron (pair) plasmas. The initial configuration is set up as a relativistic Harris equilibrium without a guide field. These simulations are large enough to accommodate a sufficient number of tearing and kink modes. Contrary to the non-relativistic limit, the linear tearing instability is faster than the linear kink instability, at least in our specific parameters. We find that the magnetic energy dissipation is first facilitated by the tearing instability and followed by the secondary kink instability. Particles are mostly energized inside the magnetic islands during the tearing stage due to the spatially varying electric fields produced by the outflows from reconnection. Secondary kink instability leads to additional particle acceleration. Accelerated particles are, however, observed to be thermalized quickly. The large amplitude of the vertical magnetic field resulting from the tearing modes by the secondary kink modes further help thermalizing the non-thermal particles generated from the secondary kink instability. Implications of these results for astrophysics are briefly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Residual stress-dependent electric conductivity of sputtered co-doped CeO{sub 2} thin-film electrolyte

Sm{sup 3+} and Nd{sup 3+} co-doped ceria thin-film electrolytes have been deposited on polycrystalline alumina substrates via RF magnetron sputtering. Electric conductivity is evaluated with respect to the residual stress in the film by sin{sup 2} {psi}-methodology, indicating that an in-plane tensile stress is applied to the as-deposited film. The stress in the film increases as annealing temperature decreases, and there is an enlarged crystal lattice. The results also reveal that the annealed film with a greater stress shows a higher electric conductivity, which might be due to the lower activation energy. The conductivity of the film annealed at 600 deg. C is as high as 0.009 S cm{sup -1} at 500 deg. C, and the residual stress is determined to be 542.70 MPa at room temperature.

36 MATERIALS SCIENCE↗

Diffraction barrier breakthrough in coherent anti-Stokes Raman scattering microscopy by additional probe-beam-induced phonon depletion

We provide an approach to significantly break the diffraction limit in coherent anti-Stokes Raman scattering (CARS) microscopy via an additional probe-beam-induced photon depletion (APIPD). The additional probe beam, whose profile is doughnut shaped and whose wavelength is different from the Gaussian probe beam, depletes the phonons to yield an unwanted anti-Stokes signal within a certain bandwidth at the rim of the diffraction-limited spot. When the Gaussian probe beam that follows immediately arrives, no anti-Stokes signal is generated in this region, resembling stimulated emission depletion (STED) microscopy, and the spot-generating useful anti-Stokes signals by this beam are substantially suppressed to a much smaller dimension. Scanning the spot renders three-dimensional, label-free, and chemically selective CARS images with subdiffraction resolution. Also, resolution-enhanced images of the molecule, specified by its broadband even-total CARS spectral signals not only by one anti-Stokes signal for its special chemical bond, can be obtained by employing a supercontinuum source.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atmospheric pressure cold plasma as an antifungal therapy

A microhollow cathode based, direct-current, atmospheric pressure, He/O{sub 2} (2%) cold plasma microjet was used to inactive antifungal resistants Candida albicans, Candida krusei, and Candida glabrata in air and in water. Effective inactivation (>90%) was achieved in 10 min in air and 1 min in water. Antifungal susceptibility tests showed drastic reduction of the minimum inhibitory concentration after plasma treatment. The inactivation was attributed to the reactive oxygen species generated in plasma or in water. Hydroxyl and singlet molecular oxygen radicals were detected in plasma-water system by electron spin resonance spectroscopy. This approach proposed a promising clinical dermatology therapy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FIRST SDO AIA OBSERVATIONS OF A GLOBAL CORONAL EUV 'WAVE': MULTIPLE COMPONENTS AND 'RIPPLES'

We present the first Solar Dynamics Observatory Atmospheric Imaging Assembly (AIA) observations of a global coronal EUV disturbance (so-called 'EIT wave') revealed in unprecedented detail. The disturbance observed on 2010 April 8 exhibits two components: one diffuse pulse superimposed, on which are multiple sharp fronts that have slow and fast components. The disturbance originates in front of erupting coronal loops and some sharp fronts undergo accelerations, both effects implying that the disturbance is driven by a coronal mass ejection. The diffuse pulse, propagating at a uniform velocity of 204-238 km s{sup -1} with very little angular dependence within its extent in the south, maintains its coherence and stable profile for {approx}30 minutes. Its arrival at increasing distances coincides with the onsets of loop expansions and the slow sharp front. The fast sharp front overtakes the slow front, producing multiple 'ripples' and steepening the local pulse, and both fronts propagate independently afterward. This behavior resembles the nature of real waves. Unexpectedly, the amplitude and FWHM of the diffuse pulse decrease linearly with distance. A hybrid model, combining both wave and non-wave components, can explain many, but not all, of the observations. Discoveries of the two-component fronts and multiple ripples were made possible for the first time thanks to AIA's high cadences ({<=}20 s) and high signal-to-noise ratio.

79 ASTRONOMY AND ASTROPHYSICS↗

Evolution of cementite morphology in pearlitic steel wire during wet wire drawing

The evolution of the cementite phase during wet wire drawing of a pearlitic steel wire has been followed as a function of strain. Particular attention has been given to a quantitative characterization of changes in the alignment and in the dimensions of the cementite phase. Scanning electron microscope observations show that cementite plates become increasingly aligned with the wire axis as the drawing strain is increased. Measurements in the transmission electron microscope show that the cementite deforms plastically during wire drawing , with the average thickness of the cementite plates decreasing from 19 nm ({epsilon} = 0) to 2 nm ({epsilon} = 3.7) in correspondence with the reduction in wire diameter. The deformation of the cementite is strongly related to plastic deformation in the ferrite, with coarse slip steps, shear bands and cracks in the cementite plates/particles observed parallel to either {l_brace}110{r_brace}{sub {alpha}} or {l_brace}112{r_brace}{sub {alpha}} slip plane traces in the ferrite.

36 MATERIALS SCIENCE↗

AN INTRIGUING CHROMOSPHERIC JET OBSERVED BY HINODE: FINE STRUCTURE KINEMATICS AND EVIDENCE OF UNWINDING TWISTS

We report a chromospheric jet lasting for more than 1 hr observed by the Hinode Solar Optical Telescope in unprecedented detail. The ejection occurred in three episodes separated by 12-14 minutes, with the amount and velocity of material decreasing with time. The upward velocities range from 438 to 33 km s{sup -1}, while the downward velocities of the material falling back have smaller values (mean: -56km s{sup -1}) and a narrower distribution (standard deviation: 14km s{sup -1}). The average acceleration inferred from parabolic spacetime tracks is 141 m s{sup -2}, a fraction of the solar gravitational acceleration. The jet consists of fine threads (0.''5-2'' wide), which exhibit coherent, oscillatory transverse motions perpendicular to the jet axis and about a common equilibrium position. These motions propagate upward along the jet, with the maximum phase speed of 744+-11 km s{sup -1}at the leading front of the jet. The transverse oscillation velocities range from 151 to 26 km s{sup -1}, amplitudes from 6.0 to 1.9 Mm, and periods from 250 to 536 s. The oscillations slow down with time and cease when the material starts to fall back. The falling material travels along almost straight lines in the original direction of ascent, showing no transverse motions. These observations are consistent with the scenario that the jet involves untwisting helical threads, which rotate about the axis of a single large cylinder and shed magnetic helicity into the upper atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of ultraviolet irradiation on luminescence properties of undoped ZnS and ZnS:Ag nanoparticles

Undoped ZnS and ZnS:Ag nanoparticles have been prepared through hydrothemal synthesis. The changes of luminescence properties induced by ultraviolet irradiation have been investigated. For both samples, the initial slight increase in luminescence is ascribed to the fast electron filling, while the succedent decrease is supposed to be caused by nonradiative pathways originating from some unknown photochemical products. The more remarkable decrease in ZnS:Ag is put down to the segregation of Ag on the surfaces of ZnS:Ag nanoparticles. Multipeaks Gaussian fitting is applied to the emission spectra. The fitting peaks around 490 nm in both samples are related with the surface states emission and the fitting peaks around 456 nm in ZnS nanoparticles and 443 nm in ZnS:Ag nanoparticles are attributed to the type of donor-acceptor pair luminescence, which corresponds to the transition between different donor levels and acceptor levels in different samples. A model of stretched exponential function is used to fit the fluorescence decay spectra. Result shows that the introduction of Ag{sup +} ions causes a spectacular lifetime shortening of ZnS. Experiment result also verifies the model as that the lifetimes of both samples are notably shortened after irradiation for 2 h.

77 NANOSCIENCE AND NANOTECHNOLOGY↗