Engineering topics
Wei, Ping
Publications and source records attributed to Wei, Ping.
High-performance n-type Yb x Co 4 Sb 12 : from partially filled skutterudites towards composite thermoelectrics
The filling fraction limit (FFL) of skutterudites, that is, the complex balance of formation enthalpies among different species, is an intricate but crucial parameter for achieving high thermoelectric performance. In this work, we synthesized a series of Yb x Co 4 Sb 12 samples with x=0.2–0.6 and systemically studied the FFL of Yb, which is still debated even though this system has been extensively investigated for decades. Our combined experimental efforts of X-ray diffraction, microstructural and quantitative compositional analyses clearly reveal a Yb FFL of ~0.29 in CoSb 3 , which is consistent with previous theoretical calculations. For the excess Yb in samples with x>0.35 mainly form metallic YbSb 2 precipitates, the Fermi level increases significantly and thus increases the electrical conductivity and decreasing the Seebeck coefficient. Our result is further corroborated by the numerical calculations based on the Bergman’s composite theory, which accurately reproduces the transport properties of the x>0.35 samples based on nominal Yb 0.35 Co 4 Sb 12 and YbSb 2 composites. A maximum ZT of 1.5 at 850 K is achieved for Yb 0.3 Co 4 Sb 12 , which is the highest value for a single-element-filled CoSb 3 . The high ZT originates from the high-power factor (in excess of 50 μW cm - K -2 ) and low lattice thermal conductivity (well below 1.0 W m - K -1 ). More importantly, the large average ZTs, for example, ~1.05 for 300–850 K and ~1.27 for 500–850 K, are comparable to the best values for n-type skutterudites. The high thermoelectric and thermomechanical performances and the relatively low air and moisture sensitivities of Yb make Yb-filled CoSb 3 , a promising candidate for large-scale power generation applications.
Minimum Thermal Conductivity in Weak Topological Insulators with Bismuth-Based Stack Structure
Explore the source record for details and available documents.
Electronegative Guests in CoSb 3
Introducing guests into a host framework to form a so called inclusion compound can be used to design materials with new and fascinating functionalities. The vast majority of inclusion compounds have electropositive guests with neutral or negatively charged frameworks. Here, we show a series of electronegative guest filled skutterudites with inverse polarity. The strong covalent guest-host interactions observed for the electronegative group VIA guests, i.e., S and Se, feature a unique localized cluster vibration which significantly influences the lattice dynamics, together with the point-defect scattering caused by element substitutions, resulting in very low lattice thermal conductivity values. The findings of electronegative guests provide a new perspective for guest-filling in skutterudites, and the covalent filler/lattice interactions lead to an unusual lattice dynamics phenomenon which can be used for designing high-efficiency thermoelectric materials and novel functional inclusion compounds with open structures.
Enhanced thermoelectric performance in Cu-intercalated BiTeI by compensation weakening induced mobility improvement
The low weighted carrier mobility has long been considered to be the key challenge for improvement of thermoelectric (TE) performance in BiTeI. The Rashba-effect-induced two-dimensional density of states in this bulk semiconductor is beneficial for thermopower enhancement, which makes it a prospective compound for TE applications. In this report, we show that intercalation of minor Cu-dopants can substantially alter the equilibria of defect reactions, selectively mediate the donor-acceptor compensation, and tune the defect concentration in the carrier conductive network. Consequently, the potential fluctuations responsible for electron scattering are reduced and the carrier mobility in BiTeI can be enhanced by a factor of two to three between 10 K and 300 K. The carrier concentration can also be optimized by tuning the Te/I composition ratio, leading to higher thermopower in this Rashba system. Cu-intercalation in BiTeI gives rise to higher power factor, slightly lower lattice thermal conductivity, and consequently improved figure of merit. Compared with pristine BiTe 0.98 I 1.02 , the TE performance in Cu 0.05 BiTeI reveals a 150% and 20% enhancement at 300 and 520 K, respectively. Ultimately, these results demonstrate that defect equilibria mediated by selective doping in complex TE and energy materials could be an effective approach to carrier mobility and performance optimization.
Part-crystalline part-liquid state and rattling-like thermal damping in materials with chemical-bond hierarchy
Understanding thermal and phonon transport in solids has been of great importance in many disciplines such as thermoelectric materials, which usually requires an extremely low lattice thermal conductivity (LTC). Here, by analyzing the finite-temperature structural and vibrational characteristics of typical thermoelectric compounds such as filled skutterudites and Cu 3 SbSe 3 , we demonstrate a concept of part-crystalline part-liquid state in the compounds with chemical-bond hierarchy, in which certain constituent species weakly bond to other part of the crystal. Such a material could intrinsically manifest the coexistence of rigid crystalline sublattices and other fluctuating noncrystalline sublattices with thermally induced large-amplitude vibrations and even flow of the group of species atoms, leading to atomic-level heterogeneity, mixed part-crystalline part-liquid structure, and thus rattling-like thermal damping due to the collective soft-mode vibrations similar to the Boson peak in amorphous materials. Lastly, the observed abnormal LTC close to the amorphous limit in these materials can only be described by an effective approach that approximately treats the rattling-like damping as a “resonant” phonon scattering.
Enhanced thermoelectric performance of (Ba,In) double-filled skutterudites via randomly arranged micropores
Porous (Ba,In) double-filled skutterudite materials with pore diameter about 1–4 μm were prepared by the decomposition of metastable ZnSb inclusions induced by the Zn sublimation. Transport measurements revealed that the Seebeck coefficient was increased due to the electron filtering effect induced by nanostructures in the surfaces of pores, the electrical conductivity was almost unchanged because of the percolation effect of conducted network composed of filled skutterudites, and the lattice thermal conductivity was dramatically suppressed due to the enhanced pore-edge boundary scattering of long-wavelength phonons. As a result, a maximum ZT of 1.36 was obtained, increased by 22.5% as compared to that of the bulk material with same chemical composition. This work demonstrates that by introducing porous structures is thought to be an efficient approach to improve the thermoelectric performance of bulk materials.
Crystal structure and bonding characteristics of In-doped {beta}-Zn{sub 4}Sb{sub 3}
The effects of indium impurity on the crystal structure and bonding characteristics of In-doped {beta}-Zn{sub 4}Sb{sub 3} were investigated by powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The XRD Rietveld refinement indicates that the indium impurity preferentially substitutes one of Sb atoms in Sb-Sb dimer at the 12c Sb(2) site and simultaneously leads to the increase of Zn occupancy. The observations of binding energy shift and a new valence state in Sb 3d core-level XPS spectra can be attributed to the charge transfer from In and Zn to Sb. As a result, more electropositive Zn atoms are needed to maintain the charge balance. The reduction of the lattice thermal conductivity is ascribed to the formation of the asymmetric Sb-In bond, resulting in much low lattice thermal conductivity of 0.49 W{sup -1} K{sup -1} of Zn{sub 4}Sb{sub 2.96}In{sub 0.04}. - Graphical abstract: The indium impurity substitutes one of Sb atoms in Sb-Sb dimer, resulting the charge transfer from In to Sb, which leads to the binding energy of Sb 3d core level XPS spectra shift to low value. Highlights: Black-Right-Pointing-Pointer The indium impurity preferentially substitutes one of Sb atoms in Sb-Sb dimer at the 12c Sb(2) site. Black-Right-Pointing-Pointer The occupancy of Zn increases by the In substitution for Sb, whereas that of Sb keeps constant. Black-Right-Pointing-Pointer The binding energy of Sb 3d shifts to low value. Black-Right-Pointing-Pointer The charge transfer occurs from In and Zn to Sb.