Search NASA⌕ Search

Engineering topics

Weisshaar, T. A.

Publications and source records attributed to Weisshaar, T. A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The design of a long range megatransport aircraft

Megatransport objectives and constraints are briefly reviewed, and certain solutions developed by student design teams at Perdue University are summarized. Particular attention is given to the market needs and the economic risks involved in such a project; and the different approaches taken to solve the problem and difficulties faced by the design teams. A long range megatransport aircraft is aimed at carrying more than 600 passengers at reduced cost, and at the same time, reducing airport and airway congestion. The design effort must take into account airport terminal facilities; passenger loading and unloading; and defeating the 'square-cube' law to design large structures.

Weisshaar, T. A.↗
NASA NTRS1991

Controlling panel flutter using adaptive materials

The effectiveness of using adaptive materials to control panel flutter is examined. Adaptive materials are those whose strain or mechanical properties can be controlled by the application of an external stimulus. Two such material types are piezoelectric (ceramics or polymers) and shape memory alloys. These materials experience controllable strain when subjected to applied voltage and heat, respectively. The present study investigates the use of both material types to modify the flutter characteristics of a simply supported panel in supersonic flow. Piezoelectric materials respond quickly to applied voltages and can be used with feedback control for active vibration suppression. The adaptive process of the shape memory alloy used in this study (geometry and stiffness change) is a relatively low frequency phenomenon; therefore, it is considered for passive (on/off) control schemes only. Nondimensional parameters for these adaptive materials are used with linear panel models, yielding results which allow for a better understanding of their capabilities in controlling aeroelastic responses.

Scott, R. C.↗
NASA NTRS1990

Static aeroelastic behavior of an adaptive laminated piezoelectric composite wing

The effect of using an adaptive material to modify the static aeroelastic behavior of a uniform wing is examined. The wing structure is idealized as a laminated sandwich structure with piezoelectric layers in the upper and lower skins. A feedback system that senses the wing root loads applies a constant electric field to the piezoelectric actuator. Modification of pure torsional deformaton behavior and pure bending deformation are investigated, as is the case of an anisotropic composite swept wing. The use of piezoelectric actuators to create an adaptive structure is found to alter static aeroelastic behavior in that the proper choice of the feedback gain can increase or decrease the aeroelastic divergence speed. This concept also may be used to actively change the lift effectiveness of a wing. The ability to modify static aeroelastic behavior is limited by physical limitations of the piezoelectric material and the manner in which it is integrated into the parent structure.

Weisshaar, T. A.↗
NASA NTRS1986

Aeroelastic tailoring - Theory, practice, and promise

Aeroelastic tailoring technology is reviewed with reference to the historical background, the underlying theory, current trends, and specific applications. The specific application discussed include the Transonic Aircraft Technology program, an Advanced Design Composite Aircraft, the Wing/Inlet Advanced Development program, and the forward-swept wing. Finally, the future of aeroelastic tailoring and the development of an aeroelastic tailoring analysis and design tool under the Automated Strength-Aeroelastic Design program are examined.

Shirk, M. H.↗
NASA NTRS1986

Integrated aeroservoelastic tailoring of lifting surfaces

An approach to the integration of two design activities, structural design and active control design, for a highly idealized aeroservoelastic system is presented. The particular design goal for this study is the maximization of the stable airspeed envelope of an idealized model of an aeroservoelastic system through rational and systematic variation of structural and control design parameters. The steady-state linear quadratic regulator is used to model the control subsystem; the structural subsystem is assigned characteristic design parameters, such as shear center position. The application of the procedure described here produces optimally controlled structures with stability characteristics superior to those of open-loop and initial closed-loop designs.

Zeiler, T. A.↗
NASA NTRS1986

Integrated structure/control design - Present methodology and future opportunities

Attention is given to current methodology applied to the integration of the optimal design process for structures and controls. Multilevel linear decomposition techniques proved to be most effective in organizing the computational efforts necessary for ISCD (integrated structures and control design) tasks. With the development of large orbiting space structures and actively controlled, high performance aircraft, there will be more situations in which this concept can be applied.

Weisshaar, T. A.↗
NASA NTRS1985

Interactive aircraft flight control and aeroelastic stabilization

Aeroservoelastic optimization techniques were studied to determine a methodology for maximization of the stable flight envelope of an idealized, actively controlled, flexible airfoil. The equations of motion for the airfoil were developed in state-space form to include time-domain representations of aerodynamic forces and active control. The development of an optimization scheme to stabilize the aeroelastic system over a range of airspeeds, including the design airspeed is outlined. The solution approach was divided in two levels: (1) the airfoil structure, with a design variable represented by the shear center position; and (2) the control system. An objective was stated in mathematical form and a search was conducted with the restriction that each subsystem be constrained to be optimal in some sense. Analytical expressions are developed to compute the changes in the eigenvalues of the closed-loop, actively controlled system. A stability index is constructed to ensure that stability is present at the design speed and at other airspeeds away from the design speed.

Weisshaar, T. A.↗
NASA NTRS1985

Interactive aircraft flight control and aeroelastic stabilization

An analytical model of a 3-D airfoil was used to study an optimization procedure formulated to enhance stability of an airfoil through integrated structural and control synthesis. This procedure is discussed together with preliminary results. These results show that a sensitivity derivative approach utilizing structural parameters, weighting matrix parameters and optimal control parameters (in this case, the design airspeed) is effective in determining the best structural/control design.

Weisshaar, T. A.↗
NASA NTRS1984

Interactive aircraft flight control and aeroelastic stabilization

An analytical model has been used to study the problem of integrated control system/structural dynamic design. This model utilizes the traditional typical section lifting surface with a control surface attached in 2-D unsteady incompressible flow. The studies have as their purpose the examination of the use of the location of the elastic axis of the airfoil as a design variable in the search for an actively controlled configuration that has a specified flutter margin. Items of interest include the determination of flutter speed and divergence speed as functions of a nondimensional parameter, a sub c, that measures the location (in semi-chords) of the elastic axis with respect to the airfoil midchord. All other parameters are fixed. The behavior of velocity root locus curves with changes in a sub c is illustrated. Also shown is an example of the use of sensitivity derivatives to reposition poles of the open loop system. The behavior of the actively controlled or closed loop system is also discussed. A set of examples are presented to indicate how the shear center parameter, a sub c, affects the design of the controlled system.

Weisshaar, T. A.↗
NASA NTRS1984

Interactive aircraft flight control and aeroelastic stabilization

The potential benefits and costs of optimizing both the structural stiffness and the active control of aircraft in a rational manner are investigated. The ultimate goal is to arrive at a unified treatment of structural and active control design for the stability augmentation of flexible aircraft. An exhaustive literature evaluation in the area of passive tailoring for aircraft performance is undertaken. A mathematical technique to be used for aeroservoelastic tailoring studies is described. Two analytical models, one elementary, the other sophisticated, are developed to illustrate the potential for aeroservoelastic tailoring. Both models have essential features of real world hardware, yet the physical understanding is not buried in a myriad of detail. These models are also described.

Weisshaar, T. A.↗
NASA NTRS1983

Dynamics and control of forward swept wing aircraft

Aspects of non-zero differential game theory with application to multivariable control synthesis and optimal linear control law design using optimum parameter sensitivity analysis are discussed.

Schmidt, D. K.↗
NASA NTRS1983

Aeroelastic stability of forward swept composite winged aircraft

This paper reviews the author's past and present aeroelastic stability and performance studies related to forward swept, composite wing aircraft. The influence of laminate elastic bend/twist coupling upon wing divergence, lateral control, and lift effectiveness will be illustrated by means of closed-form solutions, numerical analysis and simple wind-tunnel experiments. In addition, results of analyses of a freely flying flexible FSW aircraft are discussed to indicate the possible effects of the flexible forward swept wing on aircraft dynamic stability. These studies show, both theoretically and experimentally, that, if the aircraft is not carefully designed, a phenomenon referred to as body freedom flutter may appear.

Weisshaar, T. A.↗
NASA NTRS1982

Dynamic stability of flexible forward swept wing aircraft

This paper describes potential vehicle instability modes for forward swept wing aircraft and other divergence prone aircraft. Examples show that either body-freedom flutter or aircraft aeroelastic divergence may occur depending upon the airplane planform geometry and mass distribution. These vehicle instabilities may occur at speeds very different than the clamped wing aeroelastic divergence speed.

Weisshaar, T. A.↗
NASA NTRS1982

An exact plane-stress solution for a class of problems in orthotropic elasticity

An exact solution for the stress field within a rectangular slab of orthotropic material is found using a two dimensional Fourier series formulation. The material is required to be in plane stress, with general stress boundary conditions, and the principle axes of the material must be parallel to the sides of the rectangle. Two load cases similar to those encountered in materials testing are investigated using the solution. The solution method has potential uses in stress analysis of composite structures.

Erb, D. A.↗