Search NASASearch

Engineering topics

Wells, G.

Publications and source records attributed to Wells, G..

Unlocking the Full Potential of Earth Observation During the 2015 Texas Flood Disaster

Intense rainfall during late April and early May 2015 in Texas and Oklahoma led to widespread and sustained flooding in several river basins. Texas state agencies relevant to emergency response were activated when severe weather then ensued for 6 weeks from 8 May until 19 June following Tropical Storm Bill. An international team of scientists and flood response experts assembled and collaborated with decision-making authorities for user-driven high-resolution satellite acquisitions over the most critical areas; while experimental automated flood mapping techniques provided daily ongoing monitoring. This allowed mapping of flood inundation from an unprecedented number of spaceborne and airborne images. In fact, a total of 27,174 images have been ingested to the USGS Hazards Data Distribution System (HDDS) Explorer, except for the SAR images used. Based on the Texas flood use case, we describe the success of this effort as well as the limitations in fulfilling the needs of the decision-makers, and reflect upon these. In order to unlock the full potential for Earth observation data in flood disaster response, we suggest in a call for action(i) stronger collaboration from the onset between agencies, product developers, and decision-makers;(ii) quantification of uncertainties when combining data from different sources in order to augment information content; (iii) include a default role for the end-user in satellite acquisition planning; and(iv) proactive assimilation of methodologies and tools into the mandated agencies.

Texas

Using Visual Programming to Simulate, Test, and Display a Telemetry Stream

Advantages of using visual programming to create, modify, test and display a telemetry stream are presented. Commercial visual programming software is being used to test new algorithms as part of the ground support for the Galileo spacecraft Test Bed.

visual programming real-time data display text-bas

Using LabVIEW for Telemetry Monitoring and Display

Part of the Jet Propulsion Laboratory's (JPL's) Instrumentation Section, the Measurement Technology Center (MTC) evaluates data acquisition hardware and software products for inclusion into the Instrument Loan Pool, which are the made available to JPL experimenters.

off-the-shelf products turn-key measurement system

Searching for impact craters using space shuttle photography

Extrapolation of impact cratering rates derived from Canada and Europe suggests that in the cratonic regions of Australia, India, Africa, and Brazil, 14-15 impact craters 20 km diameter should have formed during the last 120 my, and survived erosional erasure. In fact, in these areas, only 2 craters are known that approximately qualify: (1) Gosses Bluff, 22 km, 130 + or - 6 my old, and; Strangways, 24 km and 150 + or - 70 my old. It is therefore likely that about a dozen relatively large and preserved impact craters await discovery in these less explored cratons. A larger number of younger and smaller craters must also exist. An informal search is reported for impact craters using photographs obtained by Shuttle astronauts. Photographs taken with the 250 mm lens on Hassalblad cameras have a resolution of 25 m and cover a nominal area of 50x60 sq km. A larger format Linhof camera with similar resolution but 4 times larger area was flown March 1984, and will fly again in the future. Shuttle imagery has numerous advantages in looking for impact craters and for other types of Earth observations.

Wood, C. A.

Propeller propulsion integration, phase 1

A bibliography was compiled of all readily available sources of propeller analytical and experimental studies conducted during the 1930 through 1960 period. A propeller test stand was developed for the measurement of thrust and torque characteristics of full scale general aviation propellers and installed in the LaRC 30 x 60 foot full scale wind tunnel. A tunnel entry was made during the January through February 1980 period. Several propellers were tested, but unforseen difficulties with the shaft thrust torque balance severely degraded the data quality.

Bennett, G.

Cryogenic trap valve has no moving parts

Aluminum-body trap valve with an invar stem keeps cryogenic materials in the liquid state while entering the final component of a system. The valve has no moving parts and is self-actuated and self-monitoring.

Branum, L. W.