Search NASA⌕ Search

Engineering topics

Wen, Jianguo

Publications and source records attributed to Wen, Jianguo.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Uniaxial Spin Texture in a Superconducting Electron Gas Revealed by Exchange Interactions

Two-dimensional (2D) superconductors with spin-textured Fermi surfaces can be a platform for realizing unconventional pairing states and are of substantial interest in the context of quantum information science and superconducting spintronics/orbitronics. We observed an unusual in-plane uniaxial anisotropy in the superconducting 2D electron gas (2DEG) formed at EuOx/KTaO3 (110) interfaces. This anisotropy is not evident in AlOx/KTaO3 (110) where the overlayer is nonmagnetic. Our results are consistent with a highly anisotropic “half-Rashba” spin-textured Fermi surface in 2DEGs formed at the KTaO3 (110) interface that is hidden from external magnetic fields due to a near cancellation between orbital and spin moments but revealed by exchange interactions of the electrons in the 2DEG with Eu moments near the EuOx/KTaO3 (110) interface. The interactions between the uniaxial spin texture and the magnetic overlayer offer previously unexplored ways to explore the interplay between magnetism and 2D superconductivity.

Yang, Junyi↗
DOE OSTI2024

Revealing subterahertz atomic vibrations in quantum paraelectrics by surface-sensitive spintronic terahertz spectroscopy

Understanding surface collective dynamics in quantum materials is crucial for advancing quantum technologies. For example, surface phonon modes in quantum paraelectrics are thought to be essential in facilitating interfacial superconductivity. However, detecting these modes, especially below 1 terahertz, is challenging because of limited sampling volumes and the need for high spectroscopic resolution. Here, we report surface soft transverse optical (TO1) phonon dynamics in KTaO 3 and SrTiO 3 by surface-sensitive spintronic terahertz spectroscopy that can sense the collective modes only a few nanometers deep from the surface. In KTaO 3 , the TO1 mode softens and sharpens with decreasing temperature, leveling off at 0.7 terahertz. In contrast, this mode in SrTiO 3 broadens substantially below the quantum paraelectric crossover and coincides with the hardening of a sub–milli–electron volt phonon mode related to the antiferrodistortive transition. These observations that deviate from their bulk properties may have implications for interfacial superconductivity and ferroelectricity. The developed technique opens opportunities for sensing low-energy surface collective excitations.

Chu, Zhaodong↗
DOE OSTI2024

Single-Atom Manganese-Based Catalysts for the Oxidative Dehydrogenation of Propane

Combinatorial screening of 150 supported metal oxide (manganese and additives) catalysts was carried out via a high-throughput synthesis platform and parallel reactors for the oxidative dehydrogenation (ODH) of propane to propylene. Specifically, an organomanganese (0.05-2.5 Mn atoms/nm 2 ) complex was grafted on metal oxide supports (Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ) premodified with either Lewis acid (Al, Ti, Zn, and Zr) or redox-active (Cu, Cr, Ga Ni, V) additives at various surface coverages (25, 50, and 75%). Catalysts were characterized by high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, and UV-vis spectroscopy. Catalysts 0.05 Mn/V(50%)/Al 2 O 3 and 0.05 Mn/Ni(50%)/ZrO 2 showed the highest combined propane conversion and propylene selectivities (31/41% and 15/85%), with excellent stability at 500 degrees C for 25 h. The presence of Ni in Mn/Ni/ZrO 2 resulted in a 6-fold increase in turnover frequency (TOF) over the Mn/ZrO 2 . HRTEM identified single Mn atoms after 500 degrees C heat treatment. For the Mn/Ni/ZrO 2 system, Mn was incorporated into the support lattice due to the similar ionic radius of Mn 2+ and Zr 4+ , which was also enhanced by the presence of Ni. For the Mn/V/Al 2 O 3 system, highly active MnO was prevalent as observed by Raman. Both V and Mn contributed to an increase in mutual dispersion, but both species remained on the surface. Finally, it is proposed that the highly dispersed atom and interactions between Mn with either Ni or V are responsible for the ODH performance and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Selective single-atom adsorption for precision separation of lead ions in tap water via capacitive deionization

Capacitive deionization (CDI) offers a cost-effective and low-energy method for selective removal of Pb 2+ from drinking water. Modifying CDI electrode surfaces with functional groups presents a versatile approach to enhancing selective ion adsorption capacity. However, a comprehensive understanding of the selectivity and removal efficiency of Pb 2+ among diverse functional groups remains unexplored. Here, we investigated the effects of different functional groups (-SH, -COOH, and -NH 2 ) attached to the graphene oxide (GO) electrode surfaces on Pb 2+ selectivity and removal efficiency. Surprisingly, GO-COOH demonstrated single-atom adsorption of Pb 2+ , displaying superior removal efficiency and selectivity compared with -SH and -NH 2 , although -SH possesses significant chelation capability for Pb 2+ . Both density functional theory (DFT) calculations and X-ray pair distribution function (PDF) analyses confirmed that Pb 2+ exhibits a theoretically higher affinity to -COOH. Further, this research deepens our understanding of the interactions between functional groups and heavy metal ions, enabling selective and rapid separation of target cations for water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Acid Etching‐Driven Self‐Assembly of Mn‐Shell Inducing Rock‐Salt Phase for Enhanced Single‐Crystal Ni‐Rich Cathodes

With the wide adoption of Li‐ion batteries, Ni‐rich cathode is considered as one of the most promising candidates of cathodes due to its high energy density and low cost. However, stability decreased with increasing Ni content in the Ni‐rich cathode. To solve this bottleneck, many strategies, such as coating, doping, surface modification, and special morphologies, have been developed. Herein, we introduce a groundbreaking approach for enhancing Ni‐rich cathode through an innovative acid etching process that promotes Mn shell self‐assembly, inducing a rock‐salt phase on the surface. This method not only simplifies the Ni‐rich cathode modification process, but also significantly improves the structural stability and electrochemical performance of Ni‐rich cathode. Our findings demonstrate that developed single‐crystal Ni‐rich cathode shows 3–34 % better stability compared to both commercial modified Ni‐rich cathode and unmodified counterparts. The unique Mn shell effectively mitigates reversible phase shifts during cycling, contributing to a remarkable enhancement in cycling stability. Additionally, this novel fabrication technique paves the way for cost‐effective production of high‐performance cathode materials, offering substantial benefits for lithium‐ion battery technology. And this study proves the potential of this method in advancing the design and development of durable, high‐capacity cathode materials for next‐generation batteries.

Ni-rich cathode↗
DOE OSTI2024

Optical and microstructural studies of erbium-doped TiO 2 thin films on silicon, SrTiO 3 , and sapphire

Rare-earth ion doped oxide thin films integrated on silicon substrates provide a route toward scalable, chip-scale platforms for quantum coherent devices. Erbium-doped TiO 2 is an attractive candidate: the Er 3+ optical transition is compatible with C-band optical fiber communications, while TiO 2 is an insulating dielectric compatible with silicon process technology. Through structural and optical studies of Er-doped TiO 2 thin films grown via molecular beam deposition on silicon, SrTiO 3 , and sapphire substrates, we have explored the impact of polycrystallinity and microstructure on the optical properties of the Er emission. Comparing polycrystalline TiO 2 (rutile)/Si with single-crystalline TiO 2 (rutile)/r-sapphire and polycrystalline TiO 2 (anatase)/Si with single-crystalline TiO 2 (anatase)/SrTiO 3 , we observe that the inhomogeneous linewidth (Γ inh ) of the most prominent peak in the Er spectrum (the Y 1 –Z 1 transition, 1520 and 1533 nm in rutile and anatase TiO 2 ) is significantly narrower in the polycrystalline case. This implies a relative insensitivity to extended structural defects and grain boundaries in such films (as opposed to, e.g., point defects). We show that the growth of an undoped, underlying TiO 2 buffer on Si can reduce Γ inh by a factor of 4–5. Expectedly, Γ inh also reduces with decreasing Er concentrations: we observe a ∼2 order of magnitude reduction from ∼1000 ppm Er to ∼10 ppm Er. Γ inh then gets limited to a residual value of ∼5 GHz that is insensitive to further reduction in the Er concentration. Based upon the above results, we argue that the optical properties in these thin films are limited by the presence of high “grown-in” point defect concentrations.

Chemical elements↗
DOE OSTI2024

Transformational faulting in Mn 2 GeO 4 from olivine to wadsleyite structure: Implications for physical mechanism of deep-focus earthquakes

High-pressure and temperature deformation experiments interfaced with acoustic emission (AE) monitoring have been conducted to study transformational faulting in Mn 2 GeO 4 olivine, which transforms to the β phase, isostructural to wadsleyite. Metastable Mn 2 GeO 4 olivine exhibits a marked embrittlement behavior at temperatures between 800 and 1100 K, emitting numerous AEs. At each temperature, brittle deformation is characterized by a two-stage process: (1) a “preparation” stage with numerous diffusedly located low-magnitude AEs and large b values (>2), and (2) a failure stage where larger-magnitude AEs form a planar distribution with b values about 1. Microstructure analysis reveals extensive kink band development in olivine grains in the recovered samples. Kink band boundaries (KBBs), with a typical thickness of ∼100 nm, are filled with a nanometric β-Mn 2 GeO 4 “gouge”. A dense array of secondary shear localizations is often present within the kink bands, suggesting significant shear deformation therein. The combined observations suggest that faulting in metastable Mn 2 GeO 4 olivine is a self-similar process, from grain-scale to the sample-scale. Both observed embrittlement behavior and the microstructure of metastable Mn 2 GeO 4 olivine are essentially identical to those in Mg 2 GeO 4 olivine we have reported previously, indicating that the physical mechanism of faulting in metastable olivine is insensitive to the specific crystallographic structure of the high-pressure phase. The low b values (about 1) observed in the faulting process in our experiments are similar to those of deep focus earthquakes in cold subduction zones. Our observed mechanism explains deep focus seismicity in cold metastable mantle wedges, provided that the self-similarity assumption holds to geological scales.

58 GEOSCIENCES↗
DOE OSTI2024

Atomistic evidence of nucleation mechanism for the direct graphite-to-diamond transformation

The direct graphite-to-diamond transformation mechanism has been a subject of intense study and remains debated concerning the initial stages of the conversion, the intermediate phases, and their transformation pathways. Here, we successfully recover samples at the early conversion stage by tuning high-pressure/high-temperature conditions and reveal direct evidence supporting the nucleation-growth mechanism. Atomistic observations show that intermediate orthorhombic graphite phase mediates the growth of diamond nuclei. Furthermore, we observe that quenchable orthorhombic and rhombohedra graphite are stabilized in buckled graphite at lower temperatures. These intermediate phases are further converted into hexagonal and cubic diamond at higher temperatures following energetically favorable pathways in the order: graphite → orthorhombic graphite → hexagonal diamond, graphite → orthorhombic graphite → cubic diamond, graphite → rhombohedra graphite → cubic diamond. Furthermore, these results significantly improve our understanding of the transformation mechanism, enabling the synthesis of different high-quality forms of diamond from graphite.

Graphite-diamond phase transformation↗
DOE OSTI2024

Surface Atomic Rearrangement with High Cation Ordering for Ultra-Stable Single-Crystal Ni-Rich Co-Less Cathode Materials

It is crucial to minimize cobalt content in Ni-rich layered single-crystal cathodes due to their high price and limited availability, yet it will inevitably lead to cation disordering, capacity degradation, and thermal issues. Herein, to overcome the intrinsic trade-off between performance and composition of Ni-rich Co-less single-crystal cathodes, a precursor engineering strategy with an epitaxially grown cobalt enrichment on the surface is innovatively proposed. In contrast to traditional coating modifications with random orientation and rigid surface-bulk boundary, the epitaxially enriched surface cobalt layer on the precursor undergoes rapid interdiffusion with the internal Ni 3+ during the optimized sintering process. This interdiffusion eliminates the surface-bulk boundary, promoting the uniform distribution of cobalt and synergistically addressing the Li/Ni intermixing. Moreover, an enhanced surface Li + diffusion is obtained, thereby suppressing the Li + concentration gradient and intragranular cracks generation. Consequently, the modified LiNi 0.7 Co 0.07 Mn 0.23 O 2 exhibits impressive cycling stability with increased capacity retention in both coin-type half-cells and pouch-type full-cells (91% after 1000 cycles), even under the harsh condition of high-temperature, surpassing the majority of previously reported Ni-rich cathodes. Finally, this work opens new avenues toward the low cost, high energy density, thermal stability, and long cyclic life for Ni-rich Co-less cathodes and sheds light on large-scale commercial production.

25 ENERGY STORAGE↗
DOE OSTI2024

Ultrastable cathodes enabled by compositional and structural dual-gradient design

Cathodes for next-generation batteries are pressed for higher voltage operation (≥4.5 V) to achieve high capacity with long cyclability and thermal tolerance. Current cathodes fail to meet these requirements owing to structural and electrochemical strains at high voltages, leading to fast capacity fading. Here, in this work, we present a cathode with a coherent architecture ranging from ordered to disordered frameworks with concentration gradient and controllable Ni oxidation activities, which can overcome voltage ceilings imposed by existing cathodes. This design enables simultaneous high-capacity and high-voltage operation at 4.5 V without capacity fading, and up to 4.7 V with negligible capacity decay. Multiscale diffraction and imaging techniques reveal the disordered surface is electrochemically and structurally indestructible, preventing surface parasitic reactions and phase transitions. Structural coherence from ordering to disordering limits lattice parameter changes, mitigating lattice strain and enhancing morphological integrity. The dual-gradient design also notably improves thermal stability, driving the advancement of high-performance cathode materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrochemical reactivity and passivation of organic electrolytes at spinel MgCrMnO 4 cathode interfaces for rechargeable high voltage magnesium-ion batteries

Magnesium transition metal oxides such as MgCr 2−x Mn x O 4 are promising high-voltage and high-capacity cathode materials for rechargeable magnesium batteries (RMBs). Understanding and improving the chemical and electrochemical stability of the cathode–electrolyte interface (CEI) has been the primary technical emphasis to enable this category of cathode materials, which has been significantly underexplored. Herein, in this study, we focus on investigating the fundamental mechanism of parasitic reactions at the charged surface of the high-voltage MgCrMnO 4 model cathode with different organic electrolytes. The aim is to reveal the underlying effect of anions and solvents responsible for the passivation behavior of the cathode by using three exemplary anions: [(CF 3 SO 2 ) 2 N] − (TFSI − ), Al[OC(CF 3 ) 3 ] 4 − (TPFA − ), and [CB 11 H 12 ] − (MC) and three solvents: diglyme (G2), triglyme (G3), and 3-methoxypropylamine (MPA). High precision leakage current measurements during potentiostatic hold reveal that the electrolyte solvent chemistry has a more profound impact than anion's on the passivation of the MgCrMnO 4 cathode surface during deintercalation of Mg 2+ . X-ray photoelectron spectroscopy exhibits the differences in CEI composition. Amine solvents like MPA show poor passivation due to a higher degree of solvent decomposition, while the thin and anion-derived CEI in glyme-based electrolytes is directly linked with the better passivation behavior on the cathode. Furthermore, we leverage the knowledge from these findings to modify the electrolyte structure by adding a solvent additive, with the goal of reducing the parasitic reaction.

25 ENERGY STORAGE↗
DOE OSTI2024

Advancing the Performance of Lithium-Rich Oxides in Concert with Inherent Complexities: Domain-Selective Substitutions

Historically, modifications to Li- and Mn-rich (LMR) cathodes have been studied in relation to their efficacy in solving challenges such as oxygen loss and voltage fade, which are inherent to the activation process of these electrodes. However, even in the presence of these phenomena, well-optimized LMR cathodes show considerable promise as earth-abundant options, particularly if other barriers to implementation can be overcome or mitigated. As the complex mechanisms of LMR electrodes are known to stem from the local, chemical inhomogeneities that define the nanocomposite domain nature of these oxides, strategies aimed at manipulating the performance of activated electrodes, irrespective of voltage fade, through domain-selective modifications, could prove instructive. In this work, we use a novel synthesis process aimed at influencing the site occupancy of substituted Sn 4+ , as an example 4+ cation, into a Co-free Li 1.13 Mn 0.57(1–x) Sn 0.57x Ni 0.3 O 2 LMR oxide. We show that Sn 4+ can be selectively substituted into Li-rich environments. The consequences are revealed to be both chemical and morphological, and the domain-selective doping strategy provides a knob for directed control of the low state-of-charge impedance behavior. In conclusion, these results reveal new clues and insights with respect to further advancing the practical relevance of LMR cathode particles and electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanochemically Robust LiCoO 2 with Ultrahigh Capacity and Prolonged Cyclability

Pushing intercalation-type cathode materials to their theoretical capacity often suffers from fragile Li-deficient frameworks and severe lattice strain, leading to mechanical failure issues within the crystal structure and fast capacity fading. This is particularly pronounced in layered oxide cathodes because the intrinsic nature of their structures is susceptible to structural degradation with excessive Li extraction, which remains unsolved yet despite attempts involving elemental doping and surface coating strategies. Herein, a mechanochemical strengthening strategy is developed through a gradient disordering structure to address these challenges and push the LiCoO 2 (LCO) layered cathode approaching the capacity limit (256 mAh g -1 , up to 93% of Li utilization). This innovative approach also demonstrates exceptional cyclability and rate capability, as validated in practical Ah-level pouch full cells, surpassing the current performance benchmarks. Comprehensive characterizations with multiscale X-ray, electron diffraction, and imaging techniques unveil that the gradient disordering structure notably diminishes the anisotropic lattice strain and exhibits high fatigue resistance, even under extreme delithiation states and harsh operating voltages. Consequently, this designed LCO cathode impedes the growth and propagation of particle cracks, and mitigates irreversible phase transitions. In conclusion, this work sheds light on promising directions toward next-generation high-energy-density battery materials through structural chemistry design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unrecoverable lattice rotation governs structural degradation of single-crystalline cathodes

Transitioning from polycrystalline to single-crystalline nickel-rich cathodes has garnered considerable attention in both academia and industry, driven by advantages of high tap density and enhanced mechanical properties. However, cathodes with high nickel content (>70%) suffer from substantial capacity degradation, which poses a challenge to their commercial viability. Here, leveraging multiscale spatial resolution diffraction and imaging techniques, we observe that lattice rotations occur universally in single-crystalline cathodes and play a pivotal role in the structure degradation. These lattice rotations prove unrecoverable and govern the accumulation of adverse lattice distortions over repeated cycles, contributing to structural and mechanical degradation and fast capacity fade. These findings bridge the previous knowledge gap that exists in the mechanistic link between fast performance failure and atomic-scale structure degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Deciphering the morphology of transition metal carbonate cathode precursors

The performance and life of Li-ion battery cathode materials are determined by both the composition (crystal structure and transition metal ratio) and the morphology (particle size, size distribution, and surface area). Careful control of these two aspects is the key to long lasting, high-energy batteries that can undergo fast charge. Developing such cathodes requires manipulation of the synthesis conditions, namely the coprecipitation process to develop the precursor and a calcination step to lithiate and convert it to a transition metal oxide. In this paper, we utilize a combination of controlled synthesis, microscopic and spectroscopic characterization, and multi-scale mathematical modeling to shed light on the synthesis of cathode precursors. The complex interplay between the various chemical reactions in the co-precipitation process is studied to provide experimentalists with guidance on achieving composition control during synthesis. Further, the formation of a variety of morphologies of the primary particles and the driving force for agglomeration is mathematically described, for the first time, based on an energy minimization approach. Results suggest that the presence of Ni and/or Co significantly lowers the reaction rate constant compared to Mn, resulting in agglomerated growth in the former and single crystal growth in the latter. Modeling studies are used to provide a phase map describing the synthesis conditions needed to control the secondary particle size and corresponding size distribution. Finally, this paper represents an important step in developing a computationally guided approach to the synthesis of battery cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling Morphology and Crystallinity Dynamics in Ni x Mn 1– x CO 3 Cathode Precursors through Batch-Mode Coprecipitation

This study delves into the synthesis and control of Ni x Mn 1–x CO 3 , a critical class of Mn-rich, Co-free precursors vital for cathode-oxide materials in energy storage and conversion technologies. Employing batch-mode coprecipitation, we systematically generated samples with varying Ni concentrations (x = 0, 0.1, 0.3, 0.5, 0.7, and 0.9) and conducted a comprehensive analysis of their compositions, crystallinities, transition-metal distributions, and particle morphologies through both experimental and computational methods. A significant variation in particle size and crystallinity was observed, contingent on the Ni content. Further, a pivotal transition emerged at Ni concentrations above x = ~0.5, transforming uniform morphologies, such as spherical, monodisperse, pseudo-single-crystalline particles, into bimodal, polycrystalline structures. Furthermore, the study highlights the role of Ni–ammonia complexes leading to Ni-deficient precipitates and underscores the importance of ammonia concentration in achieving precise Ni content control. This study unveils critical reaction conditions governing Mn-rich precursor properties that are vital for cathode-oxides, emphasizing the need for meticulous synthetic control and offering the potential for practical applications in advanced energy storage and conversion systems.

25 ENERGY STORAGE↗
DOE OSTI2024

Optimized In Situ Doping Strategy Stabling Single-Crystal Ultrahigh-Nickel Layered Cathode Materials

Single-crystal Ni-rich cathodes offer promising prospects in mitigating intergranular microcracks and side reaction issues commonly encountered in conventional polycrystalline cathodes. However, the utilization of micrometer-sized single-crystal particles has raised concerns about sluggish Li + diffusion kinetics and unfavorable structural degradation, particularly in high Ni content cathodes. Herein, we present an innovative in situ doping strategy to regulate the dominant growth of characteristic planes in the singlecrystal precursor, leading to enhanced mechanical properties and effectively tackling the challenges posed by ultrahigh-nickel layered cathodes. Compared with the traditional dry-doping method, our in situ doping approach possesses a more homogeneous and consistent modifying effect from the inside out, ensuring the uniform distribution of doping ions with large radius (Nb, Zr, W, etc). Further, this mitigates the generally unsatisfactory substitution effect, thereby minimizing undesirable coating layers induced by different solubilities during the calcination process. Additionally, the uniformly dispersed ions from this in situ doping are beneficial for alleviating the two-phase coexistence of H2/H3 and optimizing the Li + concentration gradient during cycling, thus inhibiting the formation of intragranular cracks and interfacial deterioration. Consequently, the in situ doped cathodes demonstrate exceptional cycle retention and rate performance under various harsh testing conditions. Our optimized in situ doping strategy not only expands the application prospects of elemental doping but also offers a promising research direction for developing high-energy-density single-crystal cathodes with extended lifetime.

25 ENERGY STORAGE↗