Engineering topics

Wen, Xixing

Publications and source records attributed to Wen, Xixing.

4 records

DOE OSTI2023

Water-Assisted Lift-Off Process for Flexible CdTe Solar Cells

In recent years, various lift-off methods have been developed to fabricate lightweight and flexible cadmium telluride (CdTe)-based solar cells. In this work, we report flexible cadmium sulfide (CdS)/CdTe solar cells using a water-assisted lift-off approach. Here we demonstrate that an additional cadmium chloride treatment for the CdS film is critical to improve the grain size of CdS and the post-deposited CdTe film and the electron conductivity of the CdS film. As a result, the quality of the CdS/CdTe front junction is significantly improved with reduced nonradiative recombination. Finally, our lightweight and flexible polycrystalline CdTe solar cells demonstrate a champion power conversion efficiency of 12.6%.

14 SOLAR ENERGY↗

DOE OSTI2022

Ultrathin Ruthenium Films on Graphene Buffered SiO 2 via Quasi Van der Waals Epitaxy

In this study, we demonstrate a quasi van der Waals epitaxy approach to prepare single crystalline Ru ultrathin film on large scale, monolayer graphene. Physical and epitaxial properties of bulk, near surface and surface of ultrathin Ru films were comprehensively studied using various structural, morphological, compositional, and electrical characterization techniques. Here, we confirm that Ru can epitaxially grow on single, monolayer graphene using magnetron sputtering at elevated temperature of 600 °C. The epitaxial Ru films with film thickness ranging from 94.2 nm down to 3.9 nm show the (0001) out-of-plane orientation. The epitaxial relationships between Ru and graphene are out-of-plane Ru(0001) || graphene(0001) and in-plane Ru[$11\bar20$] || graphene[$11\bar20$]. All the Ru films show smooth surfaces with root-mean-square roughness less than 0.8 nm and have negligible oxide layer on the surfaces. The Ru films on graphene demonstrate significantly reduced electrical resistivity comparing to their counterpart grown on bare SiO 2 , which show polycrystalline nature. For 7.1 to 3.9 nm film thicknesses, the resistivity of Ru on graphene shows 38 to 45% resistivity decrease from that of Ru film on bare SiO 2 without graphene. Our observations suggest the existence of the above-classical van der Waals interaction between Ru and graphene. On the other hand, graphene is capable of effectively blocking the inter-diffusion/interaction between Ru and SiO 2 during a 1000 °C annealing process.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Surface and interface structures of epitaxial Sb 2 Se 3 on mica

Sb 2 Se 3 thin film is an emerging photon absorber used in solar cells. We report the study of surface and interface structures of Sb2Se3(1 2 0) film grown on mica substrate by a high-rate vapor transport method. The interface epitaxial relationship between Sb 2 Se 3 and mica examined by the cross- sectional TEM images and diffraction patterns along the [0 0 1] and [10] directions of Sb 2 Se 3 reveal a rectangular structure with lengths of 4.03 ± 0.1 Å and 5.29 ± 0.1 Å, consistent with the [1 2 0] out-of-plane direction of Sb 2 Se 3 bulk lattice parameters. In contrast, the two-dimensional reciprocal space map (2D map) constructed from azimuthal reflection high-energy electron diffraction (ARHEED) patterns from the surface exhibits a decorated hexagonal structure. This surface structure emerges from six epitaxial orientation domains/rods and each domain has a rectangular unit mesh of 3.94 ± 0.09 Å and 26.95 ± 1.16 Å along the [0 0 1] and [10] directions. The 26.95 Å is consistent with the unit mesh of the outermost layer of the Sb 2 Se 3 (1 2 0) domains/rods. Overall, our 2D map reveals surface information that are not easily observed by other diffraction techniques.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

Orientation-Controlled Large-Area Epitaxial PbI 2 Thin Films with Tunable Optical Properties

Lead iodide (PbI 2 ) as a layered material has emerged as an excellent candidate for optoelectronics in the visible and ultraviolet regime. Micrometer-sized flakes synthesized by mechanical exfoliation from bulk crystals or by physical vapor deposition have shown a plethora of applications from low-threshold lasing at room temperature to high-performance photodetectors with large responsivity and faster response. However, large-area centimeter-sized growth of epitaxial thin films of PbI 2 with well-controlled orientation has been challenging. Additionally, the nature of grain boundaries in epitaxial thin films of PbI 2 remains elusive. Here, we use mica as a model substrate to unravel the growth mechanism of large-area epitaxial PbI 2 thin films. The partial growth leading to uncoalesced domains reveals the existence of inversion domain boundaries in epitaxial PbI 2 thin films on mica. Combining the experimental results with first-principles calculations, we also develop an understanding of the thermodynamic and kinetic factors that govern the growth mechanism, which paves the way for the synthesis of high-quality large-area PbI 2 on other substrates and heterostructures of PbI 2 on single-crystalline graphene. Here, the ability to reproducibly synthesize high-quality large-area thin films with precise control over orientation and tunable optical properties could open up unique and hitherto unavailable opportunities for the use of PbI 2 and its heterostructures in optoelectronics, twistronics, substrate engineering, and strain engineering.

2D materials↗