Search NASA⌕ Search

Engineering topics

Wenk, Hans-Rudolf

Publications and source records attributed to Wenk, Hans-Rudolf.

At least 19 records

Residual strain orientation in rolled titanium determined with synchrotron X-ray Laue microdiffraction

Previously, synchrotron X-ray Laue microdiffraction has been used to measure the magnitudes of residual strain in materials. Recently the method was advanced to determine the orientation of the strain ellipsoid and applied to naturally deformed quartzites; however, the deformation history of these quartzites is ambiguous due to their natural origin. Here, in this study, synchrotron X-ray Laue microdiffraction (µXRD) is used to measure the residual strain for the first time in a sample with known stress history, rolled titanium. A deviatoric strain tensor is calculated from each Laue diffraction image collected with two µXRD scans of a rolled titanium sheet in different sample orientations. The principal strain axes are calculated using an eigen decomposition of the deviatoric strain tensors. The results show that the principal axis of compression is aligned with the normal direction of the titanium sheet, and the principal axis of extension is aligned with the rolling direction. Pole figures are used to represent the 3D distribution of residual strain axes.

36 MATERIALS SCIENCE↗

XtalCAMP: a comprehensive program for the analysis and visualization of scanning Laue X-ray micro-/nanodiffraction data

XtalCAMP is a software package based on the MATLAB platform, which is suitable for, but not limited to, the analysis and visualization of scanning Laue X-ray micro-/nanodiffraction data. The main objective of the software is to provide complementary functionalities to the Laue indexing software packages used at several synchrotron beamlines. Here, the graphical user interfaces allow the easy analysis of characteristic microstructure features, including real-time intensity mapping for a quick examination of phase, grain and defect distribution, 2D color-coded mapping of microstructural properties from the output of other Laue indexing software, crystal orientation visualization, grain boundary characterization based on orientation/misorientation calculation, principal strain/stress analysis, and strain ellipsoid representation, as well as a series of additional toolkits. As an example, XtalCAMP is applied to the microstructural investigation of a solution-heat-treated Ni-based superalloy manufactured using a laser 3D-printing technique, and a deformed natural quartzite from Val Bregaglia in the Central Alps.

36 MATERIALS SCIENCE↗

Residual lattice strain in quartzites as a potential palaeo-piezometer

SUMMARY If a crystal lattice is subjected to a stress, it becomes distorted and no longer represents the ideal crystal symmetry, and if the stress introduces defects such as dislocations, some of this distortion is preserved after the applied stress is removed. In this study, we investigate lattice distortion in quartz at the micron scale with synchrotron X-ray Laue diffraction. From Laue images the local deviatoric strain tensor is derived and corresponding stresses are calculated based on elastic properties. The method is applied to metasedimentary quartzites from the Bergell Alps that were deformed at conditions of greenschist facies metamorphism. The residual palaeostrain is represented in maps of the deviatoric strain tensor components and with deviatoric strain axis pole figures. Data suggest overall shortening perpendicular to the schistosity plane but with considerable asymmetry relative to foliation and lineation, probably attributed to simple shear. Crystallographic pole figures from Laue diffraction agree with neutron diffraction and EBSD measurements and display quartz c-axes girdle distributions with maxima also perpendicular to schistosity. The method shows promise to be used as a palaeo-piezometer to unravel the stress field during tectonic deformation.

58 GEOSCIENCES↗

Deformation heterogeneity and intragrain lattice misorientation in high strength contrast, dual-phase bridgmanite/periclase

A bridgmanite/periclase aggregate is investigated due to its prevalence in the Earth’s lower mantle and its importance for understanding geodynamic processes. In dual-phase polycrystalline aggregates, both strength contrast between phases and single crystal elastic and plastic anisotropy are known to influence the development of intragrain misorientation, and the evolution of crystallographic texture. In this study, full-field crystal plasticity simulations are performed with a finite element solution method, and applied to an aggregate of a mechanically strong orthorhombic phase with perovskite structure (bridgmanite, MgSiO 3 ), and a relatively weaker cubic phase (periclase, MgO). The relative strengths of the phases are parameterized to elucidate the effect that strength contrast has on texture evolution and single-phase simulations are performed for comparison. Altogether, results indicate that the relative strength between the two phases influences the development of plasticity, and the overall texture evolution. Results are discussed in light of trends related to the evolution of plasticity and misorientation in the aggregate, and their dependence on both the strength contrast between phases as well as the spatial distribution of grains and phases.

36 MATERIALS SCIENCE↗

A simple variant selection in stress-driven martensitic transformation

Significance Variant selection plays an important role during martensitic transformations in both metals and oxides. Due to its great effects on the crystallographic texture, it has received a great deal of attention in fields of physics, material science, and even Earth science. Previously, most studies focused on transitions in metals induced by temperature. Here, we investigate more complex oxides structures during the pressure/stress-driven martensitic transformation and find a very simple variant selection in cubic/orthorhombic Mn 2 O 3 . The high-pressure orthorhombic phase inherits texture from the low-pressure cubic phase. Only one of the six cubic {110} planes becomes the orthorhombic (100) plane: the one perpendicular to the compression direction. This will become a reference to demonstrate the variant selection behavior under high pressure.

42 ENGINEERING↗

Fallout melt debris and aerodynamically-shaped glasses in beach sands of Hiroshima Bay, Japan

An intricate association of millimeter-sized, aerodynamically-shaped debris, including glass spherules, glass filaments, and composite-fused melt particles was recovered from beach sands on the shores of the Motoujina Peninsula in Hiroshima Bay, Japan. Based on optical microscopy, this debris comprises six morphological groups ranging from clear glasses to rubber-like constituents. Scanning electron microscopy and synchrotron X-ray microdiffraction revealed dominant aluminum, silicon and calcium (Al-Si-Ca) elemental composition with some iron, mainly in glass, associated with precipitates of mullite and anorthite microcrystals, hematite dendrites and iron-chromium globules, indicative of original temperature conditions >1800 °C. Aerodynamically-shaped fallout debris, including glass spherules described in this study, are generally produced by single high-energy catastrophic events, such as an extraterrestrial body impacting Earth or a nuclear explosion. Our work interprets the large volumes of fallout debris generated under extreme temperature conditions as products of the Hiroshima August 6th, 1945 atomic bomb aerial detonation. The chemical composition of the melt debris provides clues to their origin, particularly with regard to city building materials. This study is the first published record and description of fallout resulting from the destruction of an urban environment by atomic bombing.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Microlite orientation in obsidian flow measured by synchrotron X-ray diffraction

Clinopyroxene and plagioclase (andesine) microlites in an obsidian flow from Glass Mountain (NE California, USA) display strong alignment. Synchrotron X-ray diffraction, coupled with Rietveld analysis, was used to quantify crystallographic-preferred orientation (CPO). Clinopyroxene, with a rod-shaped morphology, shows a strong alignment of [001] in the flow direction and (010) aligned parallel to the inferred flow plane. Andesine, with a platy morphology, displays an alignment of (010) platelets in the flow plane. Some pole densities exceed 90 multiples of random distribution. Applying a model of rigid ellipsoidal inclusions in a viscous matrix, the local pure shear strains are between 2 and 3.

58 GEOSCIENCES↗

Anisotropy in the deep Earth

Not provided.Seismic anisotropy has been found in many regions of the Earth's interior. Its presence in the Earth's crust has been known since the 19th century, and is due in part to the alignment of anisotropic crystals in rocks, and in part to patterns in the distribution of fractures and pores. In the upper mantle, seismic anisotropy was discovered 50 years ago, and can be attributed for the most part, to the alignment of intrinsically anisotropic olivine crystals during large scale deformation associated with convection. There is some indication for anisotropy in the transition zone, particularly in the vicinity of subducted slabs. Here we focus on the deep Earth – the lower mantle and core, where anisotropy is not yet mapped in detail, nor is there consensus on its origin. Most of the lower mantle appears largely isotropic, except in the last 200–300 km, in the D" region, where evidence for seismic anisotropy has been accumulating since the late 1980s, mostly from shear wave splitting measurements. Recently, a picture has been emerging, where strong anisotropy is associated with high shear velocities at the edges of the large low shear velocity provinces (LLSVPs) in the central Pacific and under Africa. These observations are consistent with being due to the presence of highly anisotropic MgSiO3 post-perovskite crystals, aligned during the deformation of slabs impinging on the core-mantle boundary, and upwelling flow within the LLSVPs. In this report we also discuss mineral physics aspects such as ultrahigh pressure deformation experiments, first principles calculations to obtain information about elastic properties, and derivation of dislocation activity based on bonding characteristics. Polycrystal plasticity simulations can predict anisotropy but models are still highly idealized and neglect the complex microstructure of polyphase aggregates with strong and weak components. A promising direction for future progress in understanding the origin of seismic anisotropy in the deep mantle and its relation to global mantle circulation, is to link macroscopic information from seismology and microscopic information mineral physics through geodynamics modeling. Anisotropy in the inner core was proposed 30 years ago to explain faster P wave propagation along the direction of the Earth's axis of rotation as well as anomalous splitting of core sensitive free oscillations. There is still uncertainty about the origin of this anisotropy. In particular, it is difficult to explain its strength, based on known elastic properties of iron, as it would require almost perfect alignment of iron crystals. Indeed, the strongly anomalous P travel times observed on paths from the South Sandwich Islands to Alaska may or may not be due to inner core anisotropy, and will need to be explained before consensus can be reached on the strength of anisotropy in the inner core and its origin.

58 GEOSCIENCES↗

Seismic anisotropy of the D'' layer induced by (001) deformation of post-perovskite

Crystallographic preferred orientation (CPO) of post-perovskite (Mg,Fe)SiO 3 (pPv) has been believed to be one potential source of the seismic anisotropic layer at the bottom of the lower mantle (D'' layer). However, the natural CPO of pPv remains ambiguous in the D'' layer. Here we have carried out the deformation experiments of pPv-(Mg 0.75 ,Fe 0.25 )SiO 3 using synchrotron radial X-ray diffraction in a membrane-driven laser-heated diamond anvil cell from 135 GPa and 2,500 K to 154 GPa and 3,000 K. Our results show that the intrinsic texture of pPv-(Mg 0.75 ,Fe 0.25 )SiO 3 should be (001) at realistic P–T conditions of the D'' layer, which can produce a shear wave splitting anisotropy of ~3.7% with V SH >V SV . Considering the combined effect of both pPv and ferropericlase, we suggest that 50% or less of deformation is sufficient to explain the origin of the shear wave anisotropy observed seismically in the D'' layer beneath the circum-Pacific rim.

58 GEOSCIENCES↗

Compressional residual stress in Bastogne boudins revealed by synchrotron X-ray microdiffraction

Lattice distortions in crystals can be mapped at the micron scale using synchrotron X-ray Laue microdiffraction (μXRD). From lattice distortions the shape and orientation of the elastic strain tensor can be derived and interpreted in terms of residual stress. We apply the new method to vein quartz from the original boudinage locality at Bastogne, Belgium. Furthermore, a long-standing debate surrounds the kinematics of the Bastogne boudins. The μXRD measurements reveal a shortening residual elastic strain, perpendicular to the vein wall, corroborating the model that the Bastogne boudins formed by layer-parallel shortening and not by layer-parallel extension, as is in the geological community generally inferred by the process of boudinage.

58 GEOSCIENCES↗

Seismic anisotropy of serpentinite from Val Malenco, Italy

Serpentinites, deformed in mantle subduction zones, are thought to contribute significantly to seismic anisotropy of the upper mantle and have therefore been of great interest with studies on deformation, preferred orientation, and elastic properties. Here we present a combined study of a classical sample from Val Malenco, Italy, investigating the microstructure and texture with state-of-the art synchrotron X-ray and neutron diffraction methods and measuring ultrasonic velocities both with a multi-anvil apparatus and a novel instrument to measure 3-D velocities on spheres. Both, results from diffraction methods and velocity measurements are compared, discussing advantages and disadvantages. From spherical velocities, elastic tensor properties can be derived by inversion. Also from quantitative texture measurements, elastic properties can be modeled by self-consistent averaging. We report good agreement between the velocity and microstructural models is observed.

58 GEOSCIENCES↗