Search NASA⌕ Search

Engineering topics

Wermer, Joseph Raymond

Publications and source records attributed to Wermer, Joseph Raymond.

The u 3 si 2 -H system

U 3 Si 2 is of interest to the nuclear industry as a candidate fuel material due to its high uranium density and high thermal conductivity. However, it has been observed to react with hydrogen, resulting in material decrepitation. As a result, it is important to understand the thermodynamics of the U 3 Si 2 -H system. In this study, the thermodynamics of the hydrogen absorption reaction of USi were determined experimentally using Sievert’s gas absorption and related to crystallographic evolution with hydrogen content using X-ray diffraction. Experimentally-determined thermodynamic parameters were compared with results from density functional theory modeling. Results from this study were also compared with those determined in previous work. Sievert’s gas absorption results were used to develop the pressure-composition-temperature (PCT) curves of the U 3 Si 2 -H system. It was found that the hydride phase exhibited a maximum stoichiometry between U 3 Si 2 H 1.8 and U 3 Si 2 H 2 . The two-phase region for hydride formation from U 3 Si 2 exhibited a miscibility gap with a critical temperature between 623 and 673 K, as calculated from the PCT curves. Analysis of the PCT curves also showed that both the enthalpy and entropy of the hydrogen absorption reaction increased with hydrogen content but were lower than the values for uranium trihydride formation from uranium metal. The enthalpy of reaction for hydrogen absorption was calculated to range between -86.9 and -94.8 kJ mol -1 , while the entropy of reaction was calculated to range between 101.9 and 138.8 J mol -1 K -1 . Furthermore, DFT modeling of the thermoydnamic stability of the USi hydride phases yielded a decomposition temperature of U 3 Si 2 H 2 of approximately 600 K, which was consistent with the experimental results. Similarly, the DFT-calculated enthalpy and entropy of reaction to form USiH were determined to be -106.5kJ mol and 121.8J mol -1 K -1 , respectively, which were both in close agreement with the experimentally-determined values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermophysical properties of high-density, sintered monoliths of yttrium dihydride in the range 373–773 K

Yttrium dihydride is a promising nuclear reactor moderator for high-temperature, thermal micro-reactors due to its ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. However, it is difficult to fabricate yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to challenges associated with the hydrogen absorption process. Here, high-density monoliths of yttrium dihydride were prepared by powder metallurgical methods. The lattice strain and thermal expansion coefficient were measured using neutron diffraction of powders of directly-hydrided yttrium, while the molar heat capacity and thermal diffusivity of sintered yttrium dihydride were measured using differential scanning calorimetry (DSC) and laser flash analysis (LFA), respectively. The molar heat capacity of yttrium dihydride was also calculated using density functional theory (DFT) for comparison. These parameters were used to then calculate the thermal conductivity and resistivity of yttrium dihydride as a function of temperature. The thermophysical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgical methods, this result indicated that the sintered monoliths were of high quality and that powder metallurgy is a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗

Elastic moduli of high-density, sintered monoliths of yttrium dihydride

Yttrium dihydride has been considered as potential nuclear reactor moderator for micro-reactors operating in the thermal energy spectrum due to their ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. Despite these advantages, it is difficult to prepare yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to volume expansion upon hydriding and the pyrophoric nature of the material. In this work, high-density monoliths of yttrium dihydride were prepared by direct hydriding and using powder metallurgical methods. Resonant ultrasound spectroscopy was used to measure the elastic moduli of the sintered monoliths, while nanoindentation was used to determine the Young’s modulus and hardness of the directly-hydrided yttrium and the sintered monoliths. Single crystal elastic constants and related properties of yttrium dihydride were also determined using density functional theory (DFT) for comparison. We report mechanical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgy, this result indicated that the monoliths produced by powder metallurgy were of high quality. To that end, powder metallurgy is believed to be a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗

Assessment of Hydriding in the U-Si System

Fuels with high uranium densities have been considered in the Nuclear Technology Research and Development program’s Advanced Fuels Campaign as potential replacements for uranium(IV) oxide in commercial light water reactors. One such candidate fuel is U 3 Si 2 , which has been observed to readily oxidize and potentially hydride in steam and simulated pressurized water reactor conditions. The hydrogen absorption properties of U 3 Si 2 , in particular, are not well-understood. Research this FY has focused on developing a better understanding of the hydrogen absorption characteristics of U 3 Si 2 in steam and in pure hydrogen. Pellets of U 3 Si 2 were exposed to 75% steam at various temperatures and monitored for mass changes using thermogravimetric analysis, while pellets and ingots exposed to pure hydrogen in a Sieverts’ apparatus exhibited signs of hydrogen absorption. It was observed that hydrogen absorption of U 3 Si 2 required higher pressures of hydrogen than those required to hydride uranium metal at similar temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Report on Current Assessment of Fabrication Routes to Large-Scale UN Production

Uranium mononitride has been proposed for nuclear fuels, given its favorable uranium atom density and thermal conductivity. Current synthesis routes are either cost prohibitive or leave behind unwanted carbon or oxygen contaminants. Here, a route known as oxidative ammonolysis is explored to convert uranium tetrafluoride to uranium dinitride. Reaction products have been examined and phases determined. The study here shows the possibility to convert uranium fluoride phases to uranium nitride phases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗