Search NASA⌕ Search

Engineering topics

Werner, P

Publications and source records attributed to Werner, P.

Study of processes of self-catalyzed growth of gaas crystal nanowires by molecular-beam epitaxy on modified Si (111) surfaces

The processes of growth of self-catalyzed GaAs crystal nanowires on Si (111) surfaces modified by three different methods are studied. For the technology of production of the GaAs nanowires, molecular-beam epitaxy is used. It is found that, in the range of substrate temperatures between 610 and 630 Degree-Sign C, the surface density of nanowires and their diameter sharply increases, whereas the temperature dependence of the nanowire length exhibits a maximum at 610 Degree-Sign C. An increase in the temperature to 640 Degree-Sign C suppresses the formation of nanowires. The method that provides a means for the fabrication of purely cubic GaAs nanowires is described. A theoretical justification of the formation of the cubic phase in self-catalyzed GaAs nanowires is presented.

36 MATERIALS SCIENCE↗

InGaAs tunnel-injection structures with nanobridges: Excitation transfer and luminescence kinetics

Methods of optical spectroscopy and electron microscopy have been used to study tunnel-injection nanostructures the active region of which consisted of an upper In{sub 0.15}Ga{sub 0.85} As quantum-well layer and a lower layer of In{sub 0.6}Ga{sub 0.4}As quantum dots as a light emitter; both layers were separated by a GaAs barrier layer. Deviations from the semiclassical Wentzel-Kramers-Brillouin model are observed in the dependence of the tunneling time on barrier's thickness. Reduction of the transfer time to several picoseconds at a barrier thickness smaller than 6 nm is accounted for by formation of InGaAs nanobridges between tops of quantum dots and the quantum-well layer; the nanobridges include those with their own hole state. The effect of an electric field induced by tunneling on the carriers' transfer time in a tunnel-injection nanostructure is taken into account.

36 MATERIALS SCIENCE↗

Effect of parameters of Ge(Si)/Si(001) self-assembled islands on their electroluminescence at room temperature

The electroluminescence (EL) of multilayered p-i-n structures with the self-assembled Ge(Si)/Si(001) islands are investigated. It is found that the structures with islands grown at 600{sup o}C have the highest intensity of the electroluminescence signal at room temperature in the wavelength range of 1.3-1.55 {mu}m. The annealing of structures with the Ge(Si) islands leads to an increase in the EL-signal intensity at low temperatures and hampers the temperature stability of this signal, which is related to the additional Si diffusion into islands during annealing. The found considerable increase in the electroluminescence-signal intensity with the thickness of the separating Si layer is associated with a decrease in the elastic stresses in the structure with an increase in this layer's thickness. The highest EL quantum efficiency in the wavelength range of 1.3-1.55 {mu}m obtained in investigated structures amounted to 0.01% at room temperature.

36 MATERIALS SCIENCE↗

Seeing Inside Materials by Aberration-Corrected Electron Microscopy

The motivation for aberration correction in electron microscopy was primarily to improve lateral resolution, and its successful achievement enabled the direct imaging of sub- ngstrom lattice spacings in a crystal. However, the smaller probe results in greatly enhanced sensitivity for imaging individual atoms, and in addition, the wider useable aperture results in a smaller depth of field.

Aberration-Corrected Electron↗

Investigation of Point Defects by Aberration-Corrected STEM and First-Principles Theory

The successful correction of aberrations in scanning transmission electron microscopy (STEM) has improved lateral resolution by more than a factor of two [1], brought greatly enhanced sensitivity for imaging individual atoms, and depth resolution of a few nanometers [2-4]. In zone axis crystals, columnar channeling tends to reduce the depth resolution, and image simulations are necessary to establish the depth sensitivity [5]. To illustrate this capability, images from Si nanowires grown by a Au-catalyzed vapour-liquid-solid method will be presented [6]. A high density of Au atoms are seen not only on the surface of the nanowires, but, by changing focus, are seen also in the bulk of the nanowire, as shown in Fig. 1. The gold atoms move under the influence of the beam, and may not be present in the as-grown material. However, substitutional and three interstitial configurations are found, which are confirmed by density functional calculations to be stable (substitutional) or metastable (interstitial) sites. Furthermore, the number density of the different configurations correlates with their calculated defect formation energies. As a second example of the identification of a point defect complex, the origin of ferromagnetism in Co-doped anatase will be shown by a combination of imaging, EELS and theory to be a Co-Ti+3-VO complex [7].

Pennycook, Stephen J↗