Search NASA⌕ Search

Engineering topics

Whitelam, Stephen

Publications and source records attributed to Whitelam, Stephen.

At least 37 records · Page 2

Evolutionary reinforcement learning of dynamical large deviations

In this work, we show how to bound and calculate the likelihood of dynamical large deviations using evolutionary reinforcement learning. An agent, a stochastic model, propagates a continuous-time Monte Carlo trajectory and receives a reward conditioned upon the values of certain path-extensive quantities. Evolution produces progressively fitter agents, potentially allowing the calculation of a piece of a large-deviation rate function for a particular model and path-extensive quantity. For models with small state spaces, the evolutionary process acts directly on rates, and for models with large state spaces, the process acts on the weights of a neural network that parameterizes the model's rates. This approach shows how path-extensive physics problems can be considered within a framework widely used in machine learning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long-Range Exciton Diffusion in Two-Dimensional Assemblies of Cesium Lead Bromide Perovskite Nanocrystals

Förster resonant energy transfer (FRET)-mediated exciton diffusion through artificial nanoscale building block assemblies could be used as an optoelectronic design element to transport energy. However, so far, nanocrystal (NC) systems supported only diffusion lengths of 30 nm, which are too small to be useful in devices. In this work, we demonstrate a FRET-mediated exciton diffusion length of 200 nm with 0.5 cm 2 /s diffusivity through an ordered, two-dimensional assembly of cesium lead bromide perovskite nanocrystals (CsPbBr 3 PNCs). Exciton diffusion was directly measured via steady-state and time-resolved photoluminescence (PL) microscopy, with physical modeling providing deeper insight into the transport process. This exceptionally efficient exciton transport is facilitated by PNCs' high PL quantum yield, large absorption cross section, and high polarizability, together with minimal energetic and geometric disorder of the assembly. This FRET-mediated exciton diffusion length matches perovskites' optical absorption depth, thus enabling the design of device architectures with improved performances and providing insight into the high conversion efficiencies of PNC-based optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct evaluation of dynamical large-deviation rate functions using a variational ansatz

We describe a simple form of importance sampling designed to bound and compute large-deviation rate functions for time-extensive dynamical observables in continuous-time Markov chains. We start with a model, defined by a set of rates, and a time-extensive dynamical observable. We construct a reference model, a variational ansatz for the behavior of the original model conditioned on atypical values of the observable. Direct simulation of the reference model provides an upper bound on the large-deviation rate function associated with the original model, an estimate of the tightness of the bound, and, if the ansatz is chosen well, the exact rate function. The exact rare behavior of the original model does not need to be known in advance. We use this method to calculate rate functions for currents and counting observables in a set of network- and lattice models taken from the literature. Straightforward ansätze yield bounds that are tighter than bounds obtained from Level 2.5 of large deviations via approximations that involve uniform scalings of rates. Here, we show how to correct these bounds in order to recover the rate functions exactly. Our approach is complementary to more specialized methods and offers a physically transparent framework for approximating and calculating the likelihood of dynamical large deviations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalystlike role of impurities in speeding layer-by-layer growth

Molecular self-assembly is usually done at low supersaturation, leading to low rates of growth, in order to allow time for binding mistakes to anneal. However, such conditions can lead to prohibitively long assembly times where growth proceeds by the slow nucleation of successive layers. Here we use a lattice model of molecular self-assembly to show that growth in this regime can be sped up by impurities, which lower the free-energy cost of layer nucleation. Under certain conditions impurities behave almost as a catalyst in that they are present at high concentration at the surface of the assembling structure, but at low concentration in the bulk of the assembled structure. In this work, extrapolation of our numerics using simple analytic arguments suggests that this mechanism can reduce growth times by orders of magnitude in parameter regimes applicable to molecular systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ordering, flexibility and frustration in arrays of porphyrin nanorings

The regular packing of atoms, molecules and nanoparticles provides the basis for the understanding of structural order within condensed phases of matter. Typically the constituent particles are considered to be rigid with a fixed shape. Here we show, through a combined experimental and numerical study of the adsorption of cyclic porphyrin polymers, nanorings, on a graphite surface, that flexible molecules can exhibit a rich and complex packing behaviour. Depending on the number of porphyrin sub-units within the nanoring we observe either a highly ordered hexagonal phase or frustrated packing driven by directional interactions which for some arrangements is combined with the internal deformation of the cyclic polymer. Frustration and deformation occur in arrays of polymers with ten sub-units since close packing and co-alignment of neighbouring groups cannot be simultaneously realised for nanorings with this internal symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimizing thermodynamic trajectories using evolutionary reinforcement learning

Using a model heat engine we show that neural network-based reinforcement learning can identify thermodynamic trajectories of maximal efficiency. We use an evolutionary learning algorithm to evolve a population of neural networks, subject to a directive to maximize the efficiency of a trajectory composed of a set of elementary thermodynamic processes; the resulting networks learn to carry out the maximally-efficient Carnot, Stirling, or Otto cycles. Given additional irreversible processes this evolutionary scheme learns a hitherto unknown thermodynamic cycle. Our results show how the reinforcement learning strategies developed for game playing can be applied to solve physical problems conditioned upon path-extensive order parameters.

97 MATHEMATICS AND COMPUTING↗

Stereochemistry of polypeptoid chain configurations

Abstract Like polypeptides, peptoids, or N ‐substituted glycine oligomers, have intrinsic conformational preferences due to their amide backbones and close spacing of side chain substituents. However, the conformations that peptoids adopt are distinct from polypeptides due to several structural differences: the peptoid backbone is composed of tertiary amide bonds that have trans and cis conformers similar in energy, they lack a backbone hydrogen bond donor, and have an N ‐substituent. To better understand how these differences manifest in actual peptoid structures, we analyzed 46 high quality, experimentally determined peptoid structures reported in the literature to extract their backbone conformational preferences. One hundred thirty‐two monomer dihedral angle pairs were compared to the calculated energy landscape for the peptoid Ramachandran plot, and were found to fall within the expected minima. Interestingly, only two regions of the backbone dihedral angles ϕ and ψ were found to be populated that are mirror images of each other. Furthermore, these two conformers are present in both cis and trans forms. Thus, there are four primary conformers that are sufficient to describe almost all known backbone conformations for peptoid oligomers, despite conformational constraints imposed by a variety of side chains, macrocyclization, or crystal packing forces. Because these conformers are predominant in peptoid structure, and are distinct from those found in protein secondary structures, we propose a simple naming system to aid in the description and classification of peptoid structure.

Spencer, Ryan K.↗

Unconstrained peptoid tetramer exhibits a predominant conformation in aqueous solution

Abstract Conformational control in peptoids, N ‐substituted glycines, is crucial for the design and synthesis of biologically‐active compounds and atomically‐defined nanomaterials. While there are a growing number of structural studies in solution, most have been performed with conformationally‐constrained short sequences (e.g., sterically‐hindered sidechains or macrocyclization). Thus, the inherent degree of heterogeneity of unconstrained peptoids in solution remains largely unstudied. Here, we explored the folding landscape of a series of simple peptoid tetramers in aqueous solution by NMR spectroscopy. By incorporating specific 13 C‐probes into the backbone using bromoacetic acid‐2‐ 13 C as a submonomer, we developed a new technique for sequential backbone assignment of peptoids based on the 1, n ‐Adequate pulse sequence. Unexpectedly, two of the tetramers, containing an N ‐(2‐aminoethyl)glycine residue (Nae), had preferred conformations. NMR and molecular dynamics studies on one of the tetramers showed that the preferred conformer (52%) had a trans‐cis‐trans configuration about the three amide bonds. Moreover, >80% of the ensemble contained a cis amide bond at the central amide. The backbone dihedral angles observed fall directly within the expected minima in the peptoid Ramachandran plot. Analysis of this compound against similar peptoid analogs suggests that the commonly used Nae monomer plays a key role in the stabilization of peptoid structure via a side‐chain‐to‐main‐chain interaction. This discovery may offer a simple, synthetically high‐yielding approach to control peptoid structure, and suggests that peptoids have strong intrinsic conformational preferences in solution. These findings should facilitate the predictive design of folded peptoid structures, and accelerate application in areas ranging from drug discovery to biomimetic nanoscience.

Roe, Leah T.↗

Strong bonds and far-from-equilibrium conditions minimize errors in lattice-gas growth

We use computer simulation to study the layer-by-layer growth of particle structures in a lattice gas, taking the number of incorporated vacancies as a measure of the quality of the grown structure. A dynamic scaling relation describes the quality of structures in and out of equilibrium and reveals that the highest-quality structures are obtained, for fixed observation time, using strong interactions and far-from-equilibrium growth conditions. This result contrasts with the usual assumption that weak interactions and mild nonequilibrium conditions are the best way to minimize errors during assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simple coarse graining and sampling strategies for image recognition

A conceptually simple way to recognize images is to directly compare test-set data and training-set data. The accuracy of this approach is limited by the method of comparison used, and by the extent to which the training-set data covers the required configuration space. Here we show that this coverage can be substantially increased using simple strategies of coarse graining (replacing groups of images by their centroids) and sampling (using distinct sets of centroids in combination). We use the MNIST data set to show that coarse graining can be used to convert a subset of training images into about an order of magnitude fewer image centroids, with no loss of accuracy of classification of test-set images by direct (nearest-neighbor) classification. Distinct batches of centroids can be used in combination as a means of sampling configuration space, and can classify test-set data more accurately than can the unaltered training set. The approach works most naturally with multiple processors in parallel.

97 MATHEMATICS AND COMPUTING↗

Design Rules for Self-Assembly of 2D Nanocrystal/Metal–Organic Framework Superstructures

Here, we demonstrate the guiding principles behind simple two dimensional self-assembly of MOF nanoparticles (NPs) and oleic acid capped iron oxide (Fe 3 O 4 ) NCs into a uniform two-dimensional bi-layered superstructure. This self-assembly process can be controlled by the energy of ligand–ligand interactions between surface ligands on Fe 3 O 4 NCs and Zr 6 O 4 (OH) 4 (fumarate) 6 MOF NPs. Scanning transmission electron microscopy (TEM)/energy-dispersive X-ray spectroscopy and TEM tomography confirm the hierarchical co-assembly of Fe 3 O 4 NCs with MOF NPs as ligand energies are manipulated to promote facile diffusion of the smaller NCs. First-principles calculations and event-driven molecular dynamics simulations indicate that the observed patterns are dictated by combination of ligand–surface and ligand–ligand interactions. This study opens a new avenue for design and self-assembly of MOFs and NCs into high surface area assemblies, mimicking the structure of supported catalyst architectures, and provides a thorough fundamental understanding of the self-assembly process, which could be a guide for designing functional materials with desired structure.

74 ATOMIC AND MOLECULAR PHYSICS↗

Design Rules for Self-Assembly of 2D Nanocrystal/Metal-Organic Framework Superstructures

Here we demonstrate the guiding principles behind simple two dimensional self-assembly of MOF nanoparticles (NPs) and oleic acid capped iron oxide (Fe 3 O 4 ) NCs into a uniform two-dimensional bi-layered superstructure. This self-assembly process can be controlled by the energy of ligand–ligand interactions between surface ligands on Fe 3 O 4 NCs and Zr 6 O 4 (OH) 4 (fumarate) 6 MOF NPs. Scanning transmission electron microscopy (TEM)/energy-dispersive X-ray spectroscopy and TEM tomography confirm the hierarchical co-assembly of Fe 3 O 4 NCs with MOF NPs as ligand energies are manipulated to promote facile diffusion of the smaller NCs. First-principles calculations and event-driven molecular dynamics simulations indicate that the observed patterns are dictated by combination of ligand–surface and ligand–ligand interactions. This study opens a new avenue for design and self-assembly of MOFs and NCs into high surface area assemblies, mimicking the structure of supported catalyst architectures, and provides a thorough fundamental understanding of the self-assembly process, which could be a guide for designing functional materials with desired structure.

36 MATERIALS SCIENCE↗

Cooperative Gas Adsorption without a Phase Transition in Metal-Organic Frameworks

Cooperative adsorption of gases by porous frameworks, which permits more efficient uptake and removal than the more usual noncooperative (Langmuir-type) adsorption, usually results from a phase transition of the framework. Here in this paper, we show how cooperativity emerges in the class of metal-organic frameworks mmen-M 2 (dobpdc) in the absence of a phase transition. Our study provides a microscopic understanding of the emergent features of cooperative binding, including the position, slope, and height of the isotherm step, and indicates how to optimize gas storage and separation in these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-point nonequilibrium umbrella sampling and associated fluctuation relations

We describe a simple method of umbrella trajectory sampling for Markov chains. The method allows the estimation of large-deviation rate functions, for path-extensive dynamic observables, for an arbitrary number of models within a certain family. The general relationship between probability distributions of dynamic observables of members of this family is an extended fluctuation relation. When the dynamic observable is chosen to be entropy production, members of this family include the forward Markov chain and its time reverse, whose probability distributions are related by the expected simple fluctuation relation.

97 MATHEMATICS AND COMPUTING↗

Large deviations in the presence of cooperativity and slow dynamics

We study simple models of intermittency, involving switching between two states, within the dynamical large-deviation formalism. Singularities appear in the formalism when switching is cooperative or when its basic time scale diverges. In the first case the unbiased trajectory distribution undergoes a symmetry breaking, leading to a change in shape of the large-deviation rate function for a particular dynamical observable. In the second case the symmetry of the unbiased trajectory distribution remains unbroken. Comparison of these models suggests that singularities of the dynamical large-deviation formalism can signal the dynamical equivalent of an equilibrium phase transition but do not necessarily do so.

97 MATHEMATICS AND COMPUTING↗

Conformations of peptoids in nanosheets result from the interplay of backbone energetics and intermolecular interactions

Significance Commonly observed secondary structures of proteins, such as α -helices and β -sheets, are built from a trans- amide backbone with residues sampling a single region of the Ramachandran plot. Here we report a secondary structure displayed by biomimetic peptoid polymers in which the backbone exhibits the cis conformation and alternating residues display rotational states of opposed (pseudo)chirality. This structure is linear and untwisted and enables strands to pack densely into extended bilayer nanosheets.

36 MATERIALS SCIENCE↗

Phase separation and large deviations of lattice active matter

Off-lattice active Brownian particles form clusters and undergo phase separation even in the absence of attractions or velocity-alignment mechanisms. Arguments that explain this phenomenon appeal only to the ability of particles to move persistently in a direction that fluctuates, but existing lattice models of hard particles that account for this behavior do not exhibit phase separation. Here we present a lattice model of active matter that exhibits motility-induced phase separation in the absence of velocity alignment. Using direct and rare-event sampling of dynamical trajectories, we show that clustering and phase separation are accompanied by pronounced fluctuations of static and dynamic order parameters. In conclusion, this model provides a complement to off-lattice models for the study of motility-induced phase separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for cis Amide Bonds in Peptoid Nanosheets

Peptoid nanosheets are supramolecular protein-mimetic materials that form from amphiphilic polypeptoids with aromatic and ionic side chains. Nanosheets have been studied at the nanometer scale, but the molecular structure has been difficult to probe. We introduce the use of 13 C- 13 C dipolar recoupling solid-state NMR measurements to reveal the configuration of backbone amide bonds selected by 13 C isotopic labeling of adjacent α-carbons. Measurements on the same molecules in the amorphous state and in nanosheets revealed that amide bonds in the center of the amino block of peptoid (NaeNpe) 7 -(NceNpe) 7 (B28) favor the trans configuration in the amorphous state and the cis configuration in the nanosheet. This unexpected conclusion contrasts with previous NMR and theoretical studies of short solvated peptoids. Moreover, examination of the amide bond at the junction of the two charged blocks within B28 revealed a mixture of both cis and trans configurational states, consistent with the previously predicted brickwork-like intermolecular organization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗