Search NASA⌕ Search

Engineering topics

Wieselquist, William

Publications and source records attributed to Wieselquist, William.

At least 73 records · Page 4

Modernization of ORIGEN Library Creation in the SCALE Computer Code

The modernization of SCALE features has been a target for recent SCALE releases. ORIGEN, the activation and depletion code in SCALE, is one such legacy code that has been targeted for modernization. A part of these modernization efforts has been to develop capabilities within ORIGEN to directly read ENDF-formatted data files. In addition, the input format for the COUPLE library creation utility was rewritten to a format more accessible to newer SCALE users. Finally, the ability of COUPLE to create ORIGEN libraries without sublibrary data has been added.KEYWORDS: ORIGEN, depletion, SCALE, API

Hart, Shane↗

Nuclear Data Sensitivity Study for the EBR-II Fast Reactor Benchmark Using SCALE with ENDF/B-VII.1 and ENDF/B-VIII.0

The EBR-II benchmark, which was recently included in the International Handbook of Evaluated Reactor Physics Benchmark Experiments, served as a basis for assessing the performance of the SCALE code system for fast reactor analyses. A reference SCALE model was developed based on the benchmark specifications. Great agreement was observed between the eigenvalue calculated with this SCALE model and the benchmark eigenvalue. To identify potential gaps and uncertainties of nuclear data for the simulation of various quantities of interest in fast spectrum systems, sensitivity and uncertainty analyses were performed for the eigenvalue, reactivity effects, and the radial power profile of EBR-II using the two most recent ENDF/B nuclear data library releases. While the nominal results are consistent between the calculations with the different libraries, the uncertainties due to nuclear data vary significantly. The major driver of observed uncertainties is the uncertainty of the 235 U ( n,γ ) reaction. Since the uncertainty of this reaction is significantly reduced in the ENDF/B-VIII.0 library compared to ENDF/B-VII.1, the obtained output uncertainties tend to be smaller in ENDF/B-VIII.0 calculations, although the decrease is partially compensated by increased uncertainties in 235 U fission and ν ¯ .

42 ENGINEERING↗

Hierarchical Data Format for Nuclear Data Sensitivities

The SCALE code system includes capabilities for sensitivity and uncertainty (S/U) analysis as part of its TSUNAMI code suite. The sensitivity of a quantity of interest (for example, an application’s $k_{eff}$) to nuclear data is stored as a profile in a text-based file, which is known as a sensitivity data file (SDF). The sensitivity profile can be used to calculate uncertainties, correlation coefficients, and similarity indices. One of the goals of the present work was to seek general performance improvements in the TSUNAMI code suite, starting with the TSUNAMI-IP code for calculating similarity indices. Through profiling, it was found that reading the text-based sensitivity files was a performance bottleneck in the TSUNAMI-IP code. In a typical TSUNAMI-IP calculation, an application might be compared to thousands of benchmarks, thus requiring the reading of thousands of SDFs. Reading of binary-based data is generally faster than reading text-based data. Hierarchical Data Format 5 (HDF5) is a binary-based format that also benefits from being portable, and it can be inspected with nonproprietary tools. This paper describes an HDF5-based file format that has been introduced for SDFs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Initial Efforts Organizing WPNCS SG-8: Preservation of Expert Knowledge and Judgement Applied to Criticality Benchmarks

The Working Party on Nuclear Criticality Safety (WPNCS) under the guidance of the Organization for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) has over 20 years of experience addressing concerns related to static and transient configurations encountered within the nuclear fuel cycle: fuel fabrication, transportation, reprocessing, storage, and geological disposal. One of the cornerstone activities of the WPNCS is the International Criticality Safety Benchmark Evaluation Project (ICSBEP), which was established to identify a comprehensive set of criticality benchmark data, evaluate the data, including quantification of overall uncertainties; compile the data into a standardized format, perform sample calculations utilizing modern nuclear data sets and codes utilized in nuclear criticality safety, and formally document the work into a single source of verified benchmark data. Annually, members of the ICSBEP Technical Review Group (TRG) contribute evaluated benchmark data that undergoes comprehensive technical review prior to publication in the ICSBEP Handbook. In the years since the ICSBEP was established, there has been much work to prepare benchmark data to support validation activities in nuclear criticality safety. The 2020 edition of the ICSBEP Handbook contains acceptable benchmark specifications for 5,053 critical, subcritical, or near-critical configurations in 582 benchmark evaluations. Modern benchmark development benefits from decades of experienced international participants, a well-established handbook format, supplementary guides to deal with uncertainty quantification, and a comprehensive review process based upon independent reviews from international experts. The ICSBEP Handbook also contains 838 configurations deemed unacceptable to support criticality safety efforts. They are recorded, with the reasoning for their rejection, to preserve the experimental data, prevent reevaluation of data that are incomplete or contain known errors, and/or to potentially allow future reevaluation of the experiment pending the identification of sufficient data to resolve identified inconsistencies and errors. Users of the ICSBEP Handbook today might notice that the rigor and quality of modern criticality safety benchmarks is much greater than those prepared within the initial decade of the project. Benchmarks with 1s uncertainties in k eff greater than 1% were traditionally rejected unless they were identified as unique experiment types that encompassed materials, fuels, or designs not available from other benchmark experiments. However, benchmarks developed using modern experimental techniques and practices typically have uncertainties on the order of a few tenths of a percent. There have been ongoing efforts to improve the overall quality of previously published benchmark evaluations. Seventy-eight evaluations, containing approximately 600 configurations, have been revised just within the past decade. An additional eleven benchmarks are under revision for updated release in the 2020 edition of the ICSBEP Handbook. If some of the historic benchmarks were resubmitted in their current form to the TRG today, they would be rejected due to lack of data, missing components in the uncertainty analysis, or incomplete benchmark model development. The use of historic criticality safety benchmarks that underestimate the total uncertainty, lack properly quantified biases, or provide inadequate benchmark specifications do not sufficiently support modern criticality safety and nuclear data efforts. Although the ICSBEP Handbook is recognized by regulating bodies to support criticality safety, users are required to justify their reasons to ignore historic benchmark data and include additional safety margins within their designs. Discussions were held at the WPNCS 23rd Annual Meeting in September 2019 regarding the aforementioned issues. The resultant decision was to establish Subgroup 8 (SG-8): Preservation of Expert Knowledge and Judgement Applied to Criticality Benchmarks. The current activities of SG-8 are discussed herein.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Secondary-Source Core Reload Modeling with VERA

The CASL reactor simulation package VERA has been adapted to provide high-fidelity simulation capabilities for modeling source range detector response during subcritical reactor configurations. New features include the activation and shuffling of secondary-source assemblies, use of burned fuel neutron emission data from the ORIGEN depletion solver to the MPACT deterministic neutron transport solver, allowance of user-defined sources in MPACT based on material composition, ability to solve the subcritical source-driven system with neutron multiplication using the MPACT diffusion solver, and transfer of the calculated fission source from MPACT to the continuous-energy Monte Carlo solver Shift for final detector response evaluation using the CADIS methodology for variance reduction. These new capabilities were benchmarked against Watts Bar Unit 1 plant operating data for the first few fuel loading steps and were found to demonstrate excellent agreement with the measured data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

(α,n) nuclear data scoping study

Neutrons from the (α,n) reaction are an important component of nondestructive assay techniques to determine enriched uranium and other actinide inventories in a variety of critical points in the nuclear fuel cycle. However, uncertainties in the cross section, total neutron yield and neutron spectrum, and gamma emissions from these reactions, such as 19 F(α,n) and 17,18 O(α,n), introduce large uncertainties in the determination of mass of actinides of interest and can represent several significant quantities in unaccounted material in certain facility processes. Calculations and measurements depend on accurate nuclear data; however, much of the relevant data in use today was measured in the 1980s and earlier and has not been updated. Thus, the current uncertainties in the cross sections and neutron emission spectra are unacceptably large. This report documents the results of a scoping study of (α,n) reaction data that considered the current state of the data and recommends areas of improvement. It also addresses the codes use to calculate the (α,n) neutron and gamma source terms and recommends code improvements to support required analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Lattice Physics Calculations Using the Embedded Self-Shielding Method in Polaris, Part I: Methods and Implementation

Polaris is a 2-dimensional multigroup lattice physics capability in the SCALE code system for the analysis of light water reactor fuel designs. The goal of light water reactor lattice physics codes is to generate few-group homogenized cross sections for downstream full-core nodal diffusion calculations. Additionally, lattice physics calculations contain three primary components: the cross section processing calculation, the 2D transport calculation, and the depletion calculation. This paper summarizes the calculational methods and their implementation into Polaris, with an emphasis on implementation of the embedded self-shielding method. The accuracy of the embedded self-shielding method depends on the procedure used to generate self-shielding factors on the multigroup library. Numerical benchmarks calculations reveal that the accuracy of Polaris eigenvalue predictions is enhanced by (1) using heterogeneous unit cell models to generate the self-shielding factors on the library and (2) using self-shielding factors for within-group scattering cross section.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Improvement of SCALE-XSPROC Multigroup Cross Section Processing Based on the CENTRM Pointwise Slowing Down Calculation

The SCALE-XSProc multigroup (MG) cross section processing procedure based on the CENTRM pointwise slowing down calculation is the primary procedure to process problem-dependent self-shielded MG cross sections and scattering matrices for neutron transport calculations.This procedure supports various cell-based geometries including slab, 1-D cylindrical, 1-D spherical and 2-D rectangular configurations and doubly heterogeneous particulate fuels. Recently, this procedure has been significantly improved to be applied to any advanced reactor analysis covering thermal and fast reactor systems, and to be comparable to continuous energy (CE) Monte Carlo calculations. Some reactivity bias and reaction rate differences have been observed compared with CE Monte Carlo calculations, and several areas for improvement have been identified in the SCALE-XSProc MG cross section processing: (1) resonance self-shielding calculations within the unresolved resonance range, (2) 10 eV thermal cut-off energy for the free gas model, (3) on-the-fly adjustments to the thermal scattering matrix, (4) normalization of the pointwise neutron flux, and (5) fine MG energy structure. This procedure ensures very accurate MG cross section processing for high-fidelity deterministic reactor physics analysis for various advanced reactor systems.

Kim, Kang Seog↗

Monte Carlo Uncertainty Quantification in UF 6 Cylinder Neutron Emissions

In order to provide timely detection of the diversion of nuclear material, the international community needs to develop technology for safeguarding the entire fuel cycle. As such, there is significant interest in securing the front end of the fuel cycle through precise and accurate material accountancy prior to fuel irradiation. One particularly attractive solution for such problems is the development of unattended enrichment verification monitors for uranium hexafluoride (UF 6 ) transit cylinders. Systems such as the Unattended Cylinder Verification Station (UCVS) promise to provide independent nuclear material accountancy (i.e. measurements of relative enrichment, 235 U mass and total uranium mass) for all UF 6 cylinders entering and/or leaving any enrichment or fuel fabrication facilities.

07 ISOTOPE AND RADIATION SOURCES↗

Summary: Verification of the ENDF/B-VII.1 and VIII.0 AMPX 1597-group Libraries for Advanced Reactor Analysis

The SCALE/AMPX multigroup (MG) cross section processing procedure has been updated to minimize reactivity differences for various advanced thermal and fast reactor designs, as observed for the current MG libraries, resulting in excellent agreement between the calculations with the new MG libraries and the continuous-energy reference calculations. The SCALE MG calculations are widely applied to thermal spectrum light-water reactor systems, as well as fast spectrum metallic systems. Due to growing interest from industry and regulators in applying SCALE for the design of fast spectrum reactors—both sodium and molten salt—it was desirable to review and improve the SCALE/AMPX procedure for unresolved resonance self-shielded data and high-energy neutron spectra. The data were improved by generating MG unresolved resonance data based on the analytic probability table method with the narrow resonance approximation and by using very fine and intermediate group structures that are typical for fast system analysis. This study focused on verifying the improved SCALE/AMPX MG cross section processing procedure and the new AMPX 1597-group library with the ENDF/B-VII.1 and VIII.0 evaluated nuclear data. The verification was made by performing reaction rate analysis and benchmark calculations for various thermal and fast reactor systems. Results indicate that the improved SCALE/AMPX MG cross section processing and libraries provide excellent results for advanced reactor analysis.

Kim, Kang Seog↗

Molten Salt Reactor Fuel Depletion Tools in SCALE

Molten salt reactor depletion modeling and simulation tools have been implemented into the SCALE suite for reactor analysis and design developed by Oak Ridge National Laboratory. For depletion with material feeds and removals, additional removal and feed rate functionalities are being developed in ORIGEN to account for these flows during depletion. To track separate fuel and waste materials, additional functions and an iterative scheme are being added to the SCALE/TRITON lattice physics tool. The functionality of these tools has been demonstrated in part for previous analyses using external scripts that manage SCALE/TRITON calculations. Direct implementation of these functionalities into SCALE provides for a more ecient, more accurate material accountability methodology that is accessible to external SCALE users with a new input definition. These implementations are being tested for accuracy and to demonstrate their applicability to predefined molten salt reactor use case problems. This work demonstrates the capability of the SCALE modeling and simulation tools for reactor physics and fuel cycle analysis of molten salt reactor concepts.

Betzler, Benjamin↗

SCALE/Sampler Sensitivity Indices

The Sampler sequence of the SCALE code system for random sampling–based uncertainty analyses has recently been extended by including a sensitivity analysis. In uncertainty analyses with respect to uncertainties in the nuclear data, the determination of two multiple correlation coefficients—R2 and SPC2—allows for the identification of nuclide reactions that are significantly contributing to the investigated output uncertainty. Individual nuclide reactions are ranked by importance, allowing suggestions for additional measurements and evaluations to significantly reduce the observed output uncertainty. A brief description of the theory is provided herein, followed by application of this analysis to a sodium-cooled fast reactor pin cell.

Bostelmann, Rike↗