Search NASA⌕ Search

Engineering topics

Wiesner, Ulrich

Publications and source records attributed to Wiesner, Ulrich.

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The emerging field of block copolymer self-assembly-directed quantum materials

The area of functional materials derived from block copolymers (BCPs) as structure-directing agents for various inorganic materials has seen substantial growth as a result of the immense scientific as well as technological promise associated with such hybrid materials. Further, the convergence of BCP self-assembly with the fast-growing field of quantum materials now promises solution-based synthetic approaches to classes of materials that to date are dominated by stringent high-vacuum physical deposition techniques and bulk solid state chemical reactions. Moreover, the ensuing periodic nano- and mesostructures, a characteristic of BCP self-assembly, offer a unique platform for manipulating quantum-level properties, in turn resulting in substantial changes of macroscopic properties. This article will make a case for, review the existing work of, and provide our perspectives on this emerging field of block copolymer self-assembly directed quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Oxides and Nitrides with Asymmetric Pore Structure from Block Copolymer Co–Assembly and Non–Solvent Induced Phase Separation

Materials combining an asymmetric pore structure with mesopores everywhere enable high surface area accessibility and fast transport, making them attractive for e.g., energy conversion and storage applications. Block copolymer (BCP)/inorganic precursor co-assembly combined with non-solvent induced phase separation (NIPS) provides a route to materials in which a mesoporous top surface layer merges into an asymmetric support with graded porosity along the film normal and mesopores throughout. Here, the co-assembly and non-solvent-induced phase separation (CNIPS) of poly(isoprene)-b-poly(styrene)-b-poly(4-vinylpyridine) (ISV) triblock terpolymer and titanium dioxide (TiO 2 ) sol-gel nanoparticlesare reported. Heat-treatment in air results in free-standing asymmetric porous TiO 2 . Further thermal processing in ammonia results in free-standing asymmetric porous titanium nitride (TiN). processing changes alter structural membrane characteristics is demonstrated. Changing the CNIPS evaporation time results in various membrane cross-sections ( finger-like to sponge-like). Further, oxide and nitride material composition, crystallinity, and porosity are tuned by varying thermal processing conditions. Finally, thermal processing condition effects are probed on phase-pure asymmetric nitride membrane behavior using cyclic voltammetry to elucidate their influence, e.g., on specific capacitance. Results provide further insights into improving asymmetric and porous materials for applications including energy conversion and storage, separation, and catalysis and motivate a further expansion of CNIPS to other (in)organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rapid Identification of Synthetic Routes to Functional Metastable Phases Using X-ray Probed Laser Anneal Mapping (XPLAM) Time-Temperature Quench Maps

Many material systems have known or predicted functional phases that are metastable at standard temperature and pressure. While substantial advances have been made in the high-throughput and combinatorial synthesis of materials with a range of stoichiometries, investigation of thermal processing remains largely the domain of iterative uniform anneals or static gradients. Here we develop X-ray probed laser anneal mapping (XPLAM), a high throughput technique coupling spatially resolved X-ray diffraction with microsecond to millisecond laser gradient anneals to produce temperature–dwell–transformation (TDT) diagrams of the phase as a function of quench time and temperature. In addition to showing regimes where specific metastable phases form preferentially, TDT diagrams provide insight into the submillisecond kinetics of solid–solid phase transitions. This is a unique tool for mapping reaction pathways for metastable phases. As a first demonstration of XPLAM, we study Bi2O3, which has a rich set of polytypes, including the d-phase with an exceptionally high oxygen ion conductivity. We demonstrate the first annealing-driven synthesis of room temperature d-Bi2O3. We expect XPLAM to prove a powerful technique for rapid identification of synthetic routes to metastable phases and to generate the exhaustive data sets required for machine learning-guided exploration of materials processing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Superconducting Quantum Metamaterials from Convergence of Soft and Hard Condensed Matter Science

Superconducting quantum metamaterials are expected to exhibit a variety of novel properties, but have been a major challenge to prepare as a result of the lack of appropriate synthetic routes to high-quality materials. Here, the discovery of synthesis routes to block copolymer (BCP) self-assembly-directed niobium nitrides and carbonitrides is described. The resulting materials exhibit unusual structure retention even at temperatures as high as 1000 °C and resulting critical temperature, T c , values comparable to their bulk analogues. Applying the concepts of soft matter self-assembly, it is demonstrated that a series of four different BCP-directed mesostructured superconductors are accessible from a single triblock terpolymer. Resulting materials display a mesostructure-dependent T c without substantial variation of the XRDmeasured lattice parameters. Lastly, field-dependent magnetization measurements of a sample with double-gyroid morphology show abrupt jumps comparable in overall behavior to flux avalanches. Results suggest a fruitful convergence of soft and hard condensed matter science.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Porous cage-derived nanomaterial inks for direct and internal three-dimensional printing

The convergence of 3D printing techniques and nanomaterials is generating a compelling opportunity space to create advanced materials with multiscale structural control and hierarchical functionalities. While most nanoparticles consist of a dense material, less attention has been payed to 3D printing of nanoparticles with intrinsic porosity. Here, we combine ultrasmall (about 10 nm) silica nanocages with digital light processing technique for the direct 3D printing of hierarchically porous parts with arbitrary shapes, as well as tunable internal structures and high surface area. Thanks to the versatile and orthogonal cage surface modifications, we show how this approach can be applied for the implementation and positioning of functionalities throughout 3D printed objects. Furthermore, taking advantage of the internal porosity of the printed parts, an internal printing approach is proposed for the localized deposition of a guest material within a host matrix, enabling complex 3D material designs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrochemical generation of hexacyanoferrate and hexacyanoruthanate electroactive films at nickel electrode surfaces: A promising synthetic approach for new electrode materials in metal ion batteries and supercapacitors

Prussian blue analogues (PBAs) have been recently investigated as promising electrode materials for battery and supercapacitor applications. While most explorations have focused on PBA nanoparticles, very little attention has been focused on PBA films deposited on a metallic support. In this work, we have examined electrogenerating hexacyanoferrate (HCF) and hexacyanoruthenate (HCR) films on nickel surfaces via cyclic voltammetry. We found that the total material deposited was influenced by the metal cation present in the electrolyte solution and that, on average, the rate of deposition of the surface adsorbed/immobilized species was dependent on the species in solution. In particular, films electrogenerated in the presence of Na + and K + had the highest deposition rates. The cyclic voltammetric profiles exhibited dramatic differences depending on the cation present in the electrolyte solution. In addition, we found that all films were electrochemically irreversible in the presence of Li + and Mg 2+ containing electrolyte solutions. Further, and as a proof of concept, we modified high surface area nickel electrodes with HCF in sodium-based electrolytes, finding that these electrodes could operate reversibly at equivalent C-rates as high as 1667C.

25 ENERGY STORAGE↗
DOE OSTI2020

Two‐Dimensional Superstructures of Silica Cages

Abstract Despite extensive studies on mesoporous silica since the early 1990s, the synthesis of two‐dimensional (2D) silica nanostructures remains challenging. Here, mesoporous silica is synthesized at an interface between two immiscible solvents under conditions leading to the formation of 2D superstructures of silica cages, the thinnest mesoporous silica films synthesized to date. Orientational correlations between cage units increase with increasing layer number controlled via pH, while swelling with oil and mixed surfactants increase micelle size dispersity, leading to complex clathrate type structures in multilayer superstructures. The results suggest that a three‐dimensional (3D) crystallographic registry within cage‐like superstructures emerges as a result of the concerted 3D co‐assembly of the organic and inorganic components. Mesoporous 2D superstructures can be fabricated over macroscopic film dimensions and stacked on top of each other. The realization of previously inaccessible mesoporous silica heterostructures with separation or catalytic properties unachievable via conventional bulk syntheses is envisioned.

Aubert, Tangi↗