Search NASA⌕ Search

Engineering topics

Wijesinghe, Sidath

Publications and source records attributed to Wijesinghe, Sidath.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

From ionic clusters dynamics to network constraints in ionic polymer solutions

Physical networks formed by ionizable polymers with ionic clusters as crosslinks are controlled by coupled dynamics that transcend from ionic clusters through chain motion to macroscopic response. Here, the coupled dynamics, across length scales, from the ionic clusters to the networks in toluene swollen polystyrene sulfonate networks, were directly correlated, as the electrostatic environment of the physical crosslinks was altered. The multiscale insight is attained by coupling neutron spin echo measurements with molecular dynamics simulations, carried out to times typical of relaxation of polymers in solutions. The experimental dynamic structure factor is in outstanding agreement with the one calculated from computer simulations, as the networks are perturbed by elevating the temperature and changing the electrostatic environment. In toluene, the long-lived clusters remain stable over hundreds of ns across a broad temperature range, while the polymer network remains dynamic. In conclusion, though the size of the clusters changes as the dielectric constant of the solvent is modified through the addition of ethanol, they remain stable but morph, enhancing the polymer chain dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Clustering Effects on the Structure of Ionomer Solutions: A Combined SANS and Simulations Study

Ionic assemblies, or clusters, determine the structure and dynamics of ionizable polymers and enable their many applications. Fundamental to attaining well-defined materials is controlling the balance between van der Waals interactions that govern the backbone behavior and the forces that drive the formation of ionic clusters. Here, using small angle neutron scattering and fully atomistic molecular dynamics simulations, the structure of a model ionomer, sulfonated polystyrene in toluene solutions, was investigated as the cluster cohesion was tweaked by the addition of ethanol. The static structure factor was measured by both techniques and correlated with the size of the ionic clusters as the polymer concentration was varied. The conjunction of SANS results and molecular insight from MD simulations enabled the determination of the structure in these inhomogeneous networks on multiple length scales. Additionally, we find that across the entire concentration range studied, a network driven by the formation of ionic clusters was formed, where the size of the clusters drives the inhomogeneity of these systems. Tweaking the ionic clusters through the addition of ethanol impacts the packing of the sulfonated groups, their shape, and their size distribution, which in turn, affects the structure of these networks.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Molecular Insight into the Effects of Clustering on the Dynamics of Ionomers in Solutions

Ionizable groups tethered to polymers enable their many current and potential applications. However, these functionalities drive the formation of physical networks through clustering of the ionic groups, resulting in constrained dynamics of the macromolecules. Understanding the molecular origin of this hindrance remains a critical fundamental question, whose solution will directly impact the processing of ionizable polymers from molecules to viable materials. Here, in this work, using quasielastic neutron scattering accompanied by molecular dynamics simulations, segmental dynamics of slightly sulfonated polystyrene is studied in solutions as the cohesion of the ionic assemblies is tuned. We find that in cyclohexane the ionic assemblies act as centers of confinement, affecting dynamics both on macroscopic lengths and in the vicinity of the ionic assemblies. Addition of a small amount of ethanol affects the packing of the ionizable groups within the assemblies, which in turn enhances the chain dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Damage to Polystyrene Polymer Film by Shock Wave Induced Bubble Collapse

Metallic surfaces that are in contact with solutions are commonly used in numerous applications where these surfaces can be damaged by shock wave induced bubble collapse. Use of polymer films that coat such surfaces to prevent them from damage requires a better understanding of how much harm collapsing bubbles produce in the films. In this study, we report the results from coarse-grained molecular dynamics simulations to study the damage to polystyrene (PS) films coating a hard surface. The damage was caused by a collapsing nanobubble located in the proximity of the film and interacting with an impinging shock wave. This collapse produces a high-speed water jet that impacts the PS film with a greater force than the shock front and creates cavities/pits in the PS film. We observed that polymer molecules located in the jet vicinity undergo conformational extension in the direction perpendicular to the jet motion, while chain molecules in the rest of the film undergo compression. Furthermore, we also observed that damage to the film is sensitive to the strength of the shock wave.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Polymer Topology Effects on Dynamics of Comb Polymer Melts

Controlling polymer viscosity and flow is key to their many applications through strength and processability. The topology of the polymer i.e., linear, stars, and branched, affects the macroscopic flow characteristics of melts, where introducing one branch is sufficient to increase the viscosity significantly. While a number of studies have probed the effects of polymer topology on their rheology, the molecular understanding that underlies the macroscopic behavior remains an open question. The current study uses molecular dynamics simulations to resolve the effects of topology of polymer melts on chain mobility and viscosity in the comb regime using polyethylene as a model system. A coarse-grained model where four methylene groups constitute one bead is used, and the results are transposed to the atomistic level. Here, we find that while the number of branches only slightly affects the chain mobility and viscosity, their length strongly impacts their behavior. Finally, the results are discussed in terms of interplay between the relaxation of the branches and reptation of the backbone where the topology of the polymer affects the tube dimensions.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Temperature response of soft ionizable polymer nanoparticles

The temperature response of luminescent ionizable polymers confined into far from equilibrium nanoparticles without chemical links was studied using molecular dynamics simulations. These nanoparticles, often referred to as polydots, are emerging as a promising tool for nanomedicine. Incorporating ionizable groups into these polymers enables biofunctionality; however, they also affect the delicate balance of interactions that hold these nanoparticles together. Here polydots formed by a model polymer dialkyl p-phenylene ethynylene with varying number of carboxylate groups along the polymer backbone were probed. We find that increasing temperature affects neutral and charged polydots differently, where neutral polydots exhibit a transition above which their structure becomes dynamic and they unravel. The dependence of the transition temperature on the surface to volume ratio of these polydots is much stronger than what has previously been observed in polymeric thin films. In conclusion, charged polydots become dynamic enabling migration of the ionizable groups toward the particle interface, while retaining the overall particle shape.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Luminescent tunable polydots: Charge effects in confined geometry

Long-lived soft nanoparticles, formed by conjugated polymers, constitute a new class of far-from-equilibrium responsive structures for nano-medicine. Tethering ionizable groups to the polymers enables functionality. However concurrently, the ionic groups perturb the delicate balance of interactions that governs these particles. Using fully atomistic molecular dynamics simulations, this study probed the effects of charged groups tethered to poly para phenylene ethynylene substituted by alkyl groups on the polymer conformation and dynamics in confined geometry. As a result, we find that the ionizable groups affect the entire shape of the polydots and impact the conformation and dynamics of the polymer.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Conformation of ionizable poly Para phenylene ethynylene in dilute solutions

The conformation of dinonyl poly para phenylene ethynylenes (PPEs) with carboxylate side chains, equilibrated in solvents of different quality is studied using molecular dynamics simulations. PPEs are of interest because of their tunable electro-optical properties, chemical diversity, and functionality which are essential in wide range of applications. The polymer conformation determines the conjugation length and their assembly mode and affects electro-optical properties which are critical in their current and potential uses. The current study investigates the effect of carboxylate fraction on PPEs side chains on the conformation of chains in the dilute limit, in solvents of different quality. The dinonyl PPE chains are modeled atomistically, where the solvents are modeled both implicitly and explicitly. Dinonyl PPEs maintained a stretched out conformation up to a carboxylate fraction f of 0.7 in all solvents studied. The nonyl side chains are extended and oriented away from the PPE backbone in toluene and in implicit good solvent whereas in water and implicit poor solvent, the nonyl side chains are collapsed towards the PPE backbone. Thus, rotation around the aromatic ring is fast and no long range correlations are seen within the backbone.

74 ATOMIC AND MOLECULAR PHYSICS↗