The Optomechanical Design and Operation of the Ionospheric Mapping and Geocoronal Experiment
The Ionospheric Mapping and Geocoronal Experiment (IMAGER) is a space-based, multispectral, imaging payload, designed at the U.S. Naval Research Laboratory. IMAGER is designed to be at the forefront of space based remote sensing instruments for the study of the ionosphere in regards to the spatial, temporal, and spectral resolutions it will possess. IMAGER S mission is to find, track, and measure ionospheric irregularities as they move across the surface of the Earth and vary with time. IMAGER will observe the ionosphere of the Earth in the extreme and far ultraviolet wavelengths from 83.4 nm to 143.0 nm using the airglow emission from the nighttime and daytime ionosphere. The heart of the instrument consists of a 160mm, F/4.0 telescope which is an off-axial portion of a very fast aplanatic Gregorian. The focal length is 640 mm and the field of view is 2.17 degrees. The modulation transfer function is above 0.90 at 2.8 line pairs/ millimeter over the field corresponding to a 20 km line pair on the Earth. A system of reflective filters is used to select different wavelengths of interest. The telescope will be gimbaled to provide a field of regard encompassing the entire disk and limb of the Earth. The gimbal will also allow the telescope to track the ionospheric irregularities as they move. This paper describes the design of the optical and mechanical systems and their intended performance and includes an overview of the mission and science requirements that defined those aforementioned systems.