Search NASA⌕ Search

Engineering topics

Wilhite, Elmer L

Publications and source records attributed to Wilhite, Elmer L.

Automated Inadvertent Intruder Application

The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) conducts performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. These performance assessments, which result in limits on the amounts of radiological substances that can be placed in the waste disposal facilities, consider numerous potential exposure pathways that could occur in the future. One set of exposure scenarios, known as inadvertent intruder analysis, considers the impact on hypothetical individuals who are assumed to inadvertently intrude onto the waste disposal site. Inadvertent intruder analysis considers three distinct scenarios for exposure referred to as the agriculture scenario, the resident scenario, and the post-drilling scenario. Each of these scenarios has specific exposure pathways that contribute to the overall dose for the scenario. For the inadvertent intruder analysis, the calculation of dose for the exposure pathways is a relatively straightforward algebraic calculation that utilizes dose conversion factors. Prior to 2004, these calculations were performed using an Excel spreadsheet. However, design checks of the spreadsheet calculations revealed that errors could be introduced inadvertently when copying spreadsheet formulas cell by cell and finding these errors was tedious and time consuming. This weakness led to the specification of functional requirements to create a software application that would automate the calculations for inadvertent intruder analysis using a controlled source of input parameters. This software application, named the Automated Inadvertent Intruder Application, has undergone rigorous testing of the internal calculations and meets software QA requirements. The Automated Inadvertent Intruder Application was intended to replace the previous spreadsheet analyses with an automated application that was verified to produce the same calculations and results. The application was extended to calculate full decay chains for a given parent so that an intruder calculation could be performed without any input from transport calculations, i.e. the intruder analysis was decoupled from groundwater analysis. Once this full decay chain capability was in place, the application was extended to perform a transient calculation of the dose to an intruder over a specified time range, from which the maximum dose in time was determined. Use of the transient calculation to find the maximum dose in time was a significant step forward in automating and simplifying the inadvertent intruder analysis. In conclusion: an automated application has been developed to perform inadvertent intruder analysis for SRS low-level waste facilities. The application performs a transient analysis to find the maximum dose in time for each parent considered. Due to its ease of use and the standardization of input and methods, the Automated Inadvertent Intruder Application has been adopted as standard practice for inadvertent intruder analysis at SRS.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SRNL All-Pathways Application

The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) performs performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. One of the performance objectives in the DOE Order is that the radiological dose to representative members of the public shall not exceed 25 mrem in a year total effective dose equivalent from all exposure pathways, excluding radon. Analysis to meet this performance objective is generally referred to as all-pathways analysis. SRNL performs detailed transient groundwater transport analysis for the waste disposal units, which has been used as input for the groundwater part of all-pathways analysis. The desire to better integrate all-pathways analysis with the groundwater transport analysis lead to the development of a software application named the SRNL All-Pathways Application. Another requirement of DOE Order 435.1 is to assess the impact of nuclear waste disposal on water resources, which SRS has interpreted for groundwater protection as meeting the EPA regulations for radionuclides in drinking water. EPA specifies four separate criteria as part of their implementation guidance for radionuclides, which are specified as maximum contaminant levels (MCL). 1. Beta/gamma emitters have a combined dose limit of 4 mrem/year. 2. Alpha emitters have a combined concentration limit of 15 pCi/L (called gross alpha), excluding uranium and radon, but including radium-226. 3. Combined radium-226 and radium-228 have a concentration limit of 5 pCi/L. 4. Isotopes of uranium have a combined concentration limit of 30 {mu}g/L. The All-Pathways Application was designed to be an easy-to-use software application that utilizes transient concentration results from groundwater transport analysis to (1) calculate the groundwater part of all-pathways dose and to (2) evaluate the four EPA criteria for groundwater protection. An application has been developed to streamline the assessment of performance objective criteria for groundwater using concentration results from groundwater transport analyses. The SRNL All-Pathways Application evaluates the groundwater portion of all-pathways analysis and also evaluates EPA groundwater protection criteria. The application can perform a calculation using a specified inventory to determine if that inventory meets performance objectives, or it can perform a sum of fractions calculation to provide results for each parent chain that are subsequently used to establish limits on the amount of parent radionuclides that can be placed in the waste disposal unit.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗