Search NASA⌕ Search

Engineering topics

William Evans

Publications and source records attributed to William Evans.

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Welding of Crack Sensitive Aluminum Alloys for Liquid Rocket Propulsion Applications

In this welding test campaign, electron beam welding (EBW) and manual gas tungsten arc welding (GTAW) processes were utilized to join an additively manufactured aluminum alloy nozzle to a wrought aluminum flange. Both aluminum alloys were 6061, which in their conventional form are susceptible to solidification cracking issues. The AM nozzle utilized a novel high-performance modified version of 6061 which exhibits crack resistant properties during the AM process and during welding. When manually conducting GTAWs a filler wire with the same modified version of 6061 was utilized to weld different combinations of 6061 coupons (either modified or unmodified). Due to the grain refinement technology in the modified 6061, either as filler material or base material, there was complete elimination of weld solidification cracking. During EBW development a combination of wrought 6061 with a modified and additively manufactured 6061 was investigated. The EBWs developed exhibited no crack like defects. Each weld development program utilized non-destructive evaluation, metallography, and mechanical testing to determine the final weld acceptance. Mechanical testing involved hardness evaluation and tension testing on welded coupons. Both welding techniques were successfully developed and exhibited adequate properties for the final test articles and met all requirements of the development campaign. These welds were ultimately developed to be utilized on a set of all-aluminum liquid rocket nozzles to demonstrate additively manufactured aluminum alloys for propulsion applications. These aluminum nozzles were tested at NASA Marshall Space Flight Center’s hot fire test facility and subsequently underwent a test campaign involving a variety of chamber pressures and liquid propellant combinations. Following the hot fire test campaign each weldment was investigated for post operation performance and any defects that may have evolved during testing.

Welding↗
NASA NTRS2023

Additive Manufacturing Process Development DOE for NASA HR-1 using Laser Blown Powder Directed Energy Deposition

NASA HR-1 is a Fe-Ni-Cr alloy that is used for high pressure hydrogen applications such as rocket engines, energy, and oil and gas. This investigation was focused on conducting a design of experiment program aimed at mapping the parameter process window for NASA HR-1 using the laser blown powder directed energy deposition (LP-DED) process. A two phased design of experiments (DOE), the first phase of the experiment was focused on optimizing single bead tracks while the second phase of the experiment was focused on optimizing bead overlap hatching in a multi pass bead build up. During the first phase of the deposition parameters, namely laser power, travel speed, and powder feed rate were varied. A down selection from the single bead parameter set was made and hatching experiments were conducted that focused on the overlap distance. In this paper the approach for conducting the DOE and results are discussed. The results focused on measurement of bead geometry, the as-built microstructural evolution, and porosity within the samples. The team at MSFC saw a variety of results across the process map created during the first phase of experimentation and were able to down select a parameter that created an optimal bead shape with a minimal amount of build porosity. It was determined that laser power and robot travel speed were the most sensitive parameters. The results from this investigation will inform future laser powder directed energy deposition parameter developments.

Parker Shake↗
NASA NTRS2022

Topical. Permanent Low-Earth Orbit Testbed for Welding and Joining: A Path Forward for the Commercialization of Space

NASA, defense, academia, and commercial space companies seek to develop orbital manufacturing to enhance mission capabilities. In-space welding and joining are needed for space-based manufacturing. We propose a permanent low-earth orbital welding and joining testbed for scientific study of relevant physical phenomena and development of welding and joining processes to technical maturity. Such data will enable integrated computational materials engineering(ICME)to elucidate the underlying physical and metallurgical processes needed to achieve critical space welding and joining operations.

In-space manufacturing↗
NASA NTRSDate not supplied

Manufacturing and Metal Extraction Lunar Technology (MMELT)

Extraction processes of oxygen from regolith under development include carbothermal, molten regolith electrolysis (MRE), ionic liquids, and others, all of which result in a metal slag byproduct. The separation of some of these metals from the slag byproduct have been accomplished on small scales. However, no system currently exists that can extract aluminum, from these processes at scale, to create suitable feedstocks for manufacturing. Funding for MMELT will be used to develop a demonstration of the first end-to-end process to additively manufacture aluminum wire from lunar regolith in a simulated environment.

Manufacturing↗