Engineering topics
Publications and source records attributed to William Smith Jr..
NASA LaRC and research partners are analyzing geostationary satellite observations and products available at up to 30-sec frequency, in combination with ground-based and in situ datasets, to better understand and detect aviation and severe weather hazards.
With the launch of a new generation of Geostationary satellites (GEO) such as Himawari and GOES-16 & 17, cloud detection using satellite imager data has been greatly enhanced with increased spectral bands, and higher temporal and spatial resolutions. A concern for all geostationary sensors, however, are changes in instrument sensitivity and algorithm performance at different viewing for daytime and nighttime. CALIPSO lidar observations provide a valuable reference for assessing these impacts as the satellite flies in a sun-synchronous orbit and crosses a wide range of GEO viewing angles each day. This paper will present the cloud mask results using the imager data from Himawari (AHI) and GOES-16&17 (ABI). The detection algorithms have been adapted from the Cloud and Earth’s Radiant Energy System (CERES) MODIS Edition 4 cloud mask, and adjusted and tuned to geo-satellites. They are used operationally for the CERES Time and Space Averaging (TISA) gridded cloud products and for near-real-time retrievals for weather and nowcasting applications.
Explore the source record for details and available documents.
Geostationary satellites provide continuous cloud and meteorological observations over a fixed portion of the Earth’s surface, allowing them to monitor the movement of storm systems and their diurnal variation. For climate studies, geostationary observations provide valuable insight of cloud formation and evolution and how they influence the Earth’s radiation budget. The Geo-Satellite Edition 4 cloud mask (GEO Ed4) is used operationally in NASA’s Cloud and Earth’s Radiant Energy System (CERES) project to help account for diurnal variations in cloudiness on Earth’s radiation budget. The Ed4 cloud mask was applied to imager data on MSG (MeteoSat Second Generation), Himawari, GOES-West, and GOES-East satellites using as much spectral information as possible. That approach led to some discontinuities when a more modern satellite replaced an older satellite with less spectral information. A different strategy is being investigated for the CERES GEO Ed5 cloud mask that only uses spectral channels common on every satellite. Thus, a 3-channel (0.6, 3.9, 11 µm) algorithm for daytime cloud detection, and a 2-channels (3.9 and 11 µm) algorithm for nighttime cloud detection have been implemented and tested for Ed5. The goal of Ed5 cloud mask is to achieve global cloud amount consistency across five geo-satellites, and a smooth transition from an old satellite to a new satellite over each geo-location. This paper compares cloud mask results between Ed4 and a preliminary Ed5 version over the GOES-East region, using GOES-8, GOES-13, and GOES-16 satellites, each with a different spectral channel complement. Instantaneous and monthly regional mean inter-comparisons are performed and evaluated with CALIPSO cloud products to assess the accuracy and consistency of the Ed5 approach relative to that taken in Ed4. Results will be presented and discussed at the conference.
In order to produce a long-term and stable climate record of Earth’s energy budget for NASA’s Clouds and Earth’s Radiant Energy System (CERES) project, a consistent cloud fraction record across different measurement platforms is a crucial first step. As Aqua satellite is approaching the end of its operational lifetime, NOAA-20 VIIRS observations on the JPSS-2 spacecraft will be used for cloud detection to continue the long-term Earth energy budget record. Two steps are designed to achieve this goal. The first step is a quick approach that revises the CERES NOAA-20 VIIRS Edition 1 A (CV Ed1A) cloud mask to incorporate Cross-track Infrared Sounder (CrIS) water vapor and CO_2 channels into the VIIRS cloud mask (CV Ed1B) to produce a consistent cloud fraction with CERES MODIS Edition 4 (CM Ed4) to avoid potential discontinuity when Aqua orbit drifts beyond tolerance before the next Edition is completed. The second step is to develop, as part of CERES next edition (Ed5), a unified MODIS and VIIRS cloud mask using common channels to produce consistent cloud products with improved radiative transfer models, refined clear sky predictions, new GMAO reanalysis products, and the latest radiance collections of MODIS and VIIRS data. This poster will present cloud fraction comparison between CV Ed1B and CM Ed4, as well as the preliminary results of ongoing Ed5 including pixel level cloud mask results, monthly global cloud fraction differences between MODIS and VIIRS (consistency), and initial validation using CALIPSO data (accuracy).
Explore the source record for details and available documents.
A consistent cloud fraction record across various satellite platforms is essential for maintaining a long-term and stable climate data record of Earth's energy budget. With the Aqua satellite nearing the end of its operational lifetime, the continuation of this record relies on utilizing VIIRS observations from NOAA20 for cloud detection in NASA’s Clouds and Earth’s Radiant Energy System (CERES) project. However, integrating data from VIIRS and MODIS instruments poses challenges due to their distinct characteristics, such as varying spatial resolutions and different spectral channels. As a result, deriving consistent cloud properties from these two sensors without introducing artificial discontinuities in the time series remains a complex and challenging task. This paper will present progress toward developing a unified MODIS and VIIRS cloud mask using common channels to produce consistent cloud properties for CERES next edition (Ed5) Earth radiation budget data products. The fundamental approach taken in the CERES cloud mask is to compare the observed radiances to the expected background clear sky radiances. Therefore, one vital step is to compute clear sky radiances with a radiative transfer model that accurately accounts for satellite-specific, spectrally dependent surface reflectance, surface emission, and atmospheric absorption. Refined radiative transfer models and updated ancillary data inputs including surface emissivity maps, IGBP, snow and ice maps are incorporated into the processing framework to improve cloud detection consistency and accuracy. Pixel level cloud mask results and monthly global cloud fraction comparisons between MODIS and VIIRS will be presented to evaluate their consistency. Remaining challenges will be discussed. It is expected that this work will contribute consistent cloud properties for CERES that adequately bridges the MODIS and VIIRS imager data records.