Search NASASearch

Engineering topics

Williams, B. F.

Publications and source records attributed to Williams, B. F..

Neutron Stars and Black Holes in the Small Magellanic Cloud: The SMC NuSTAR Legacy Survey

We present a source catalog from the first deep hard X-ray (E > 10 keV) survey of the Small Magellanic Cloud (SMC), the Nuclear Spectroscopic Telescope Array (NuSTAR) Legacy Survey of the SMC. We observed three fields, for a total exposure time of 1 Ms, along the bar of this nearby star-forming galaxy. Fields were chosen for their young stellar and accreting binary populations. We detected 10 sources above a 3σ significance level (4–25 keV) and obtained upper limits on an additional 40 sources. We reached a 3σ limiting luminosity in the 4–25 keV band of ∼10(exp 35) erg s(exp −1), allowing us to probe fainter X-ray binary (XRB) populations than has been possible with other extragalactic NuSTAR surveys. We used hard X-ray colors and luminosities to constrain the compact-object type, exploiting the spectral differences between accreting black holes and neutron stars at E > 10 keV. Several of our sources demonstrate variability consistent with previously observed behavior. We confirmed pulsations for seven pulsars in our 3σ sample. We present the first detection of pulsations from a BeXRB, SXP 305 (CXO J005215.4–73191), with an X-ray pulse period of 305.69 ± 0.16 s and a likely orbital period of ∼1160–1180 days. Bright sources (≳5 × 10(exp 36) erg s(exp −1) ) in our sample have compact-object classifications consistent with their previously reported types in the literature. Lower-luminosity sources (≲5 × 10(exp 36) erg s(exp −1) ) have X-ray colors and luminosities consistent with multiple classifications. We raise questions about possible spectral differences at low luminosity between SMC pulsars and the Galactic pulsars used to create the diagnostic diagrams

Lazzarini, M.

Black Holes and Neutron Stars in Nearby Galaxies: Insights from NuSTAR

Nearby galaxy surveys have long classified X-ray binaries (XRBs) by the mass category of their donor stars (high-mass and low-mass). The NuSTAR (Nuclear Spectroscopic Telescope Array) observatory, which provides imaging data at E greater than 10 keV (kiloelectronvolts), has enabled the classification of extragalactic XRBs by their compact object type: neutron star (NS) or black hole (BH). We analyzed NuSTAR/Chandra/XMM-Newton observations from a NuSTAR-selected sample of 12 galaxies within 5 Mpc (megaparsecs) having stellar masses (M (sub asterisk)) 10 (sup 7-11) solar masses and star formation rates (SFRs) approximately 0.01-15 solar masses per year. We detected 128 NuSTAR sources to a sensitivity of 10 (sup 38) ergs per second. Using NuSTAR color-intensity and color-color diagrams we classified 43 of these sources as candidate NSs and 47 as candidate BHs. We further subdivide BHs by accretion states (soft, intermediate, and hard) and NSs by weak (Z/Atoll) and strong (accreting pulsar) magnetic field. Using eight normal (Milky Way-type) galaxies in the sample, we confirm the relation between the SFR and galaxy X-ray point source luminosity in the 4-25 and 12-25 keV energy bands. We also constrained galaxy X-ray point source luminosity using the relation L (sub X) equals M (sub asterisk) plus Beta SFR, finding agreement with previous work. The X-ray luminosity function (XLF) of all sources in the 4-25 and 12-25 keV energy bands matches the alpha = 1.6 slope for high-mass XRBs. We find that NS XLFs suggest a decline beginning at the Eddington limit for a 1.4 solar mass NS, whereas the BH fraction shows an approximate monotonic increase in the 4-25 and 12-25 keV energy bands. We calculate the overall ratio of BH to NS to be approximately 1 for 4-25 keV and approximately 2 for 12-25 keV.

Vulic, N.

M31N 2008-12a-The Remarkable Recurrent Nova in M31-Panchromatic Observations of the 2015 Eruption

The Andromeda Galaxy recurrent nova M31N 2008-12a had been observed in eruption 10 times, including yearly eruptions from 2008 to 2014. With a measured recurrence period of Prec = 351+/-13 days (we believe the true value to be half of this) and a white dwarf very close to the Chandrasekhar limit, M31N 2008-12a has become the leading pre-explosion supernova type Ia progenitor candidate. Following multi-wavelength follow-up observations of the 2013 and 2014 eruptions, we initiated a campaign to ensure early detection of the predicted 2015 eruption, which triggered ambitious ground- and space-based follow-up programs. In this paper we present the 2015 detection, visible to near-infrared photometry and visible spectroscopy, and ultraviolet and X-ray observations from the Swift observatory. The LCOGT 2 m (Hawaii) discovered the 2015 eruption, estimated to have commenced at August 28.28 +/- 0.12 UT. The 2013-2015 eruptions are remarkably similar at all wavelengths. New early spectroscopic observations reveal short-lived emission from material with velocities approx. 13,000 km/s, possibly collimated outflows. Photometric and spectroscopic observations of the eruption provide strong evidence supporting a red giant donor. An apparently stochastic variability during the early supersoft X-ray phase was comparable in amplitude and duration to past eruptions, but the 2013 and 2015 eruptions show evidence of a brief flux dip during this phase. The multi-eruption Swift/XRT spectra show tentative evidence of high-ionization emission lines above a high-temperature continuum. Following Henze et al. (2015a), the updated recurrence period based on all known eruptions is Prec 174 +/- 10 days, and we expect the next eruption of M31N 2008-12a to occur around 2016 mid-September.

cataclysmic variables – stars: individual (M31N

Is There a Metallicity Ceiling to Form Carbon Stars? - A Novel Technique Reveals a Scarcity of C-Stars in the Inner M31 Disk

We use medium-band near-infrared (NIR) Hubble Space Telescope WFC3 photometry with model NIR spectra of Asymptotic Giant Branch (AGB) stars to develop a new tool for efficiently distinguish- ing carbon-rich (C-type) AGB stars from oxygen-rich (M-type) AGB stars in galaxies at the edge of and outside the Local Group. We present the results of a test of this method on a region of the inner disk of M31, where we nd a surprising lack of C stars, contrary to the ndings of previous C star searches in other regions of M31. We nd only 1 candidate C star (plus up to 6 additional, less certain C stars candidates), resulting in an extremely low ratio of C to M stars (C=M = (3.3(sup +20)(sub - 0.1) x 10(sup -4)) that is 1-2 orders of magnitude lower than other C/M estimates in M31. The low C/M ratio is likely due to the high metallicity in this region which impedes stars from achieving C/O > 1 in their atmospheres. These observations provide stringent constraints to evolutionary models of metal-rich AGB stars and suggest that there is a metallicity threshold above which M stars are unable to make the transition to C stars, dramatically affecting AGB mass loss and dust production and, consequently, the observed global properties of metal-rich galaxies.

Metallicity

Management of space networks

NASA has proposed missions to the Moon and Mars that reflect three areas of emphasis: human presence, exploration, and space resource development for the benefit of Earth. A major requirement for such missions is a robust and reliable communications architecture. Network management--the ability to maintain some degree of human and automatic control over the span of the network from the space elements to the end users on Earth--is required to realize such robust and reliable communications. This article addresses several of the architectural issues associated with space network management. Round-trip delays, such as the 5- to 40-min delays in the Mars case, introduce a host of problems that must be solved by delegating significant control authority to remote nodes. Therefore, management hierarchy is one of the important architectural issues. The following article addresses these concerns, and proposes a network management approach based on emerging standards that covers the needs for fault, configuration, and performance management, delegated control authority, and hierarchical reporting of events. A relatively simple approach based on standards was demonstrated in the DSN 2000 Information Systems Laboratory, and the results are described.

Markley, R. W.

An industrial perspective of the LANDSAT opportunity

The feasibility of enhancing LANDSAT products to provide the greatest usability low cost data possible can be determined through government sponsorship and finance of one or more task forces composed of a critical number of experts in multiple disciplines from many industries and academia. The synergism of multiple minds addressing singular problems without the creation of permanent or perpetual structures must yield output in the form of implementable specifications, even if presented as alternatives. Changes are needed within the spacecraft in order to account for Sun angle changes. The use of pointing accuracy to make geometric corrections (and possible radiometric corrections, is needed more than onboard data reduction and information extraction, which assume a proper knowledge of application and reduce potential utilization. Multilinear arrays need to be investigated and methods for sensor calibration and for determining the effects of atmospheric inversion, as well as the best way to back out the modulation transfer function must be determined.

Williams, B. F.

Do photovoltaics have a future

There is major concern as to the economic practicality of widespread terrestrial use because of the high cost of the photovoltaic arrays themselves. Based on their high efficiency, photovoltaic collectors should be one of the cheapest forms of energy generators known. Present photovoltaic panels are violating the trend of lower costs with increasing efficiency due to their reliance on expensive materials. A medium technology solution should provide electricity competitive with the existing medium to high technology energy generators such as oil, coal, gas, and nuclear fission thermal plants. Programs to reduce the cost of silicon and develop reliable thin film materials have a realistic chance of producing cost effective photovoltaic panels.

Williams, B. F.

Low-cost solar-cell fabrication

Processing steps are reduced by using technique of electroless plating. Metalization and one doping steps are combined, and only one heat treatment is required. Concept is modification to method of fabricating solar cells by diffusing different dopants into opposite sides of a silicon wafer.

Amick, J. A.

Automated array assembly

Manufacturing techniques are evaluated using expenses based on experience and studying basic cost factors for each step to evaluate expenses from a first-principles point of view. A formal cost accounting procedure is developed which is used throughout the study for cost comparisons. The first test of this procedure is a comparison of its predicted costs for array module manufacturing with costs from a study which is based on experience factors. A manufacturing cost estimate for array modules of $10/W is based on present-day manufacturing techniques, expenses, and materials costs.

Williams, B. F.