Thermal properties of native and densified hardwood, softwoods, and agricultural residue
Not Available
09 BIOMASS FUELS↗
Engineering topics
Williams, C. Luke
Publications and source records attributed to Williams, C. Luke.
Epoxy Coating of Biofiber: An Effective Modifier of Biofiber Physical and Flow Properties for Improved Tensile Behavior of Biofiber-Reinforced Biocomposite
Biocomposites combine renewable, plant-based fibers with degradable polymers and are an attractive option for sustainable, lightweight, and cost-effective materials with a low carbon footprint, especially for large-scale additive manufacturing. One of the major challenges in the widespread adoption of biocomposites is that their mechanical performance is significantly inferior to that of synthetic composites. Surface treatment is a common and effective technique to improve the mechanical properties of the biofibers used in biocomposites. This study aims to investigate the physical and flow properties of surface-treated biofibers, as well as the tensile properties of their PLA-based biocomposite, to gain insights into how surface treatment changes the fiber‘s characteristics and biocomposite‘s mechanical properties. Surface treatment was created using a two-component epoxy system by reacting poly(bisphenol A-co-epichlorohydrin) glycidyl end-capped (PBG) and dicyandiamide (DICY). The treatment was tested on two different biofibers (loblolly pine and corn stover fibers) with three different PBG/DICY molar ratios (0.25, 0.5, and 2). Results showed that surface-treated fibers improved the tensile strength and Young‘s modulus of the biocomposites. Loblolly pine biocomposites from fibers treated with a PBG/DICY ratio of 0.25 exhibited the best tensile properties. The surface treatment resulted in a more loosely dispersed fiber bulk structure, as evidenced by less fiber agglomeration into smaller particle sizes, higher fiber sphericity, and lower loose bulk density. This can enhance stress distribution and the overall mechanical performance of the biocomposites. Additionally, surface-treated fibers exhibited better dynamic flow properties.
36 MATERIALS SCIENCE↗
Characterizing Variability in Lignocellulosic Biomass: A Review
Feedstock variability is a significant barrier to the scale-up and commercialization of lignocellulosic biofuel technologies. Variability in feedstock characteristics and behavior creates numerous challenges to the biorefining industry by affecting continuous operation and biofuels yields. Recently, feedstock variability is understood and explained largely on the basis of chemical composition. Physical and mechanical properties and behavior of lignocellulosic feedstock in various unit operations, studied through advanced analytical methods, can further explain variability. Such studies will enable us in developing processes and designing equipment to improve operation and conversion performance. In this perspective, we review several advanced analytical methods that measure density, moisture content, thermal properties, flowability, grindability, rheology properties, and micromorphological characteristics. We also discuss the correlations and interactions among these properties that reflect the complexity of lignocellulosic biomass as a feedstock and the associated quality metrics and logistics of supplying consistent quality feedstock to a biorefinery. We further examine methods that have not traditionally been used to characterize lignocellulosic feedstocks but have the potential to bridge the gap in our explanation of feedstock variability.
09 BIOMASS FUELS↗