Search NASA⌕ Search

Engineering topics

Williams, E

Publications and source records attributed to Williams, E.

Amplification of light in a plasma by stimulated ion acoustic waves driven by multiple crossing pump beams

Experiments demonstrate the amplification of 351 nm laser light in a hot dense plasma similar to those in inertial confinement fusion ignition experiments. A seed beam interacts with one or two counter-propagating pump beams, each with an intensity of 1.2x10{sup 15} W/cm{sup 2} at 351 nm, crossing the seed at 24.8 deg. at the position where the flow is Mach 1, allowing resonant stimulation of ion acoustic waves. Results show that the energy and power transferred to the seed are increased with two pumps beyond the level that occurs with a single pump, demonstrating that, under conditions similar to ignition experiments where each beam has a low gain exponent, the total scatter produced by the multiple beams can be significantly larger than that of the individual beams. It is further demonstrated that the amplification is greatly reduced when the pump polarization is orthogonal to the seed, as expected from models of stimulated scatter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-beam effects on backscatter and its saturation in experiments with conditions relevant to ignition

To optimize the coupling to indirect drive targets in the National Ignition Campaign (NIC) at the National Ignition Facility, a model of stimulated scattering produced by multiple laser beams is used. The model has shown that scatter of the 351 nm beams can be significantly enhanced over single beam predictions in ignition relevant targets by the interaction of the multiple crossing beams with a millimeter scale length, 2.5 keV, 0.02 - 0.05 x critical density, plasma. The model uses a suite of simulation capabilities and its key aspects are benchmarked with experiments at smaller laser facilities. The model has also influenced the design of the initial targets used for NIC by showing that both the stimulated Brillouin scattering (SBS) and stimulated Raman scattering (SRS) can be reduced by the reduction of the plasma density in the beam intersection volume that is caused by an increase in the diameter of the laser entrance hole (LEH). In this model, a linear wave response leads to a small gain exponent produced by each crossing quad of beams (<~1 per quad) which amplifies the scattering that originates in the target interior where the individual beams are separated and crosses many or all other beams near the LEH as it exits the target. As a result all 23 crossing quads of beams produce a total gain exponent of several or greater for seeds of light with wavelengths in the range that is expected for scattering from the interior (480 to 580 nm for SRS). This means that in the absence of wave saturation, the overall multi-beam scatter will be significantly larger than the expectations for single beams. The potential for non-linear saturation of the Langmuir waves amplifying SRS light is also analyzed with a two dimensional, vectorized, particle in cell code (2D VPIC) that is benchmarked by amplification experiments in a plasma with normalized parameters similar to ignition targets. The physics of cumulative scattering by multiple crossing beams that simultaneously amplify the same SBS light wave is further demonstrated in experiments that benchmark the linear models for the ion waves amplifying SBS. Here, the expectation from this model and its experimental benchmarks is shown to be consistent with observations of stimulated Raman scatter in the first series of energetic experiments with ignition targets, confirming the importance of the multi-beam scattering model for optimizing coupling.

42 ENGINEERING↗

g factors of the low-lying states in {sup 106}Pd: Examination of the vibrational character of {sup 106}Pd

The transient field (TF) technique in inverse kinematics was used to measure the g factors of the low lying 2{sub 1}{sup +}, 4{sub 1}{sup +}, and 2{sub 2}{sup +} states in {sup 106}Pd. The g factor of the 4{sub 1}{sup +} state was determined and the g(2{sub 1}{sup +}) and g(2{sub 2}{sup +}) factors were remeasured. The values of g(2{sub 1}{sup +}) and g(2{sub 2}{sup +}) had been determined earlier in integral perturbed angular correlation (IPAC) experiments and the value of the former served to calibrate the TF. The three g factors, g(2{sub 1}{sup +}), g(2{sub 2}{sup +}), and g(4{sub 1}{sup +}), agree with each other and with the collective Z/A value. The uncertainties in the g(2{sub 2}{sup +}) and g(4{sub 1}{sup +}) factors remain fairly large in spite of long measuring times because of the weak excitation of the two-phonon states. The lifetimes of the 2{sub 2}{sup +} and 4{sub 1}{sup +} states were newly determined from line-shape fits.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effective critical points in finite quantum phase transitional systems

Properties of quantum phase transitional systems in atomic nuclei are explored within the context of the interacting boson model 1 for both first and second order systems. A traditionally experimental approach is used to search for the effective finite-size critical point as a function of system size and angular momentum by studying derivatives of observables across the phase transition region. The effects of angular momentum on quantum phase transitions are investigated, and properties of first order phase transitions within the Casten triangle are examined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Policymaker's Guide to Feed-in Tariff Policy Design

Feed-in tariffs (FITs) are the most widely used renewable energy policy in the world for driving accelerating renewable energy (RE) deployment, accounting for a greater share of RE development than either tax incentives or renewable portfolio standard (RPS) policies. FITs have generated significant RE deployment, helping bring the countries that have implemented them successfully to the forefront of the global RE industry. In the European Union (EU), FIT policies have led to the deployment of more than 15,000 MW of solar photovoltaic (PV) power and more than 55,000 MW of wind power between 2000 and the end of 2009. In total, FITs are responsible for approximately 75% of global PV and 45% of global wind deployment. Countries such as Germany, in particular, have demonstrated that FITs can be used as a powerful policy tool to drive RE deployment and help meet combined energy security and emissions reductions objectives. This policymaker's guide provides a detailed analysis of FIT policy design and implementation and identifies a set of best practices that have been effective at quickly stimulating the deployment of large amounts of RE generation. Although the discussion is aimed primarily at decision makers who have decided that a FIT policy best suits their needs, exploration of FIT policies can also help inform a choice among alternative renewable energy policies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Scaling properties of quantum shape phase transitions in the interacting boson model-1

The evolution of system observables at critical points of quantum phase transitions in atomic nuclei is explored within the context of the interacting boson model-1. The evolution of energies and transition strengths in the ground state band at the infinite-size critical point are examined with respect to system size. Properties of first-order phase transitions away from the U(5)-SU(3) leg of the Casten triangle are examined, and the effects of angular momentum on the evolution of system observables at the critical point are investigated for the first time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New signature of a first order phase transition at the O(6) limit of the IBM

Shape invariants within the interacting boson model are used to describe the {gamma} deformation of the ground state and 0{sub 2}{sup +} state along the {beta}-rigid leg of the extended Casten triangle between the symmetry limits SU(3) and SU(3) via the O(6) limit. Similarly to the recently discovered {beta}-deformation crossing of the ground state with the 0{sub 2}{sup +} state between the symmetry limits U(5) and SU(3), a crossing of those states with respect to the {gamma} deformation is observed between SU(3) and SU(3). The newly introduced order parameter K{sub 3}(0{sub 1}{sup +})-K{sub 3}(0{sub 2}{sup +}) shows a peaking behavior at O(6), which is a signature of a first-order phase transition and is observed at O(6) for the first time. Comparison with existing data and experimental prospects for measuring this signature are presented and differences and similarities between spherical-deformed and prolate-oblate first-order phase transitions are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Beam-based Feedback for the Linac Coherent Light Source

Beam-based feedback control loops are required by the Linac Coherent Light Source (LCLS) program in order to provide fast, single-pulse stabilization of beam parameters. Eight transverse feedback loops, a 6 x 6 longitudinal feedback loop, and a loop to maintain the electron bunch charge were successfully prototyped in MATLAB for the LCLS, and have been maintaining stability of the LCLS electron beam at beam rates up to 30Hz. In the final commissioning phase of LCLS the beam will be operating at up to 120Hz. In order to run the feedback loops at beam rate, the feedback loops will be implemented in EPICS IOCs with a dedicated ethernet multi-cast network. This paper will discuss the design of the beam-based Fast Feedback System for LCLS. Topics include MATLAB feedback prototyping, algorithm for 120Hz feedback, network design for fast data transport, actuator and sensor design for single-pulse control and sensor readback, and feedback configuration and runtime control.

43 PARTICLE ACCELERATORS↗

Successful Completion of the Top-off Upgrade of the Advanced Light Source

An upgrade of the Advanced Light Source to enable top-off operation has been completed during the last four years. The final work centered around radiation safety aspects, culminating in a systematic proof that top-off operation is equally safe as decaying beam operation. Commissioning and transition to full user operations happened in late 2008 and early 2009. Top-off operation at the ALS provides a very large increase in time-averaged brightness (by about a factor of 10) as well as improvements in beam stability. The following sections provide an overview of the radiation safety rationale, commissioning results, as well as experience in user operations.

47 OTHER INSTRUMENTATION↗