Search NASA⌕ Search

Engineering topics

Williams, G.

Publications and source records attributed to Williams, G..

32 records · Page 2

Undercooling, Liquid Separation and Solidification of Cu-Co Alloys

Large undercooling can induce not only various solidification pathways, but also a precursor reaction, or liquid separation. This paper deals with the latter effect of undercooling using examples of the Cu-Co system which has a flattened liquidus. Bulk Cu-Co alloys (about 7mm diameter) at compositions ranging from 10 to 90 wt pct Co were highly undercooled using a fluxing technique. Except for Cu-90 wt pct Co, liquid separation was directly observed as undercooling exceeded a critical value depending on the composition. It was also confirmed by a microstructural transition from dendrites to droplets above the critical undercooling. Finally, theoretical calculations regarding the metastable miscibility boundary and maximum droplet radius were made to analyze the experimental results.

Robinson, M. B.↗

Momentum Transfer Studies and Studies of Linear and Nonlinear Optical Properties of Metal Colloids and Semiconductor Quantum Dots

Phase 1 of this work involved design work on a momentum transfer device. The progress on design and testing will be presented. Phase 2 involved the systematic study of the MPD thruster for dual uses. Though it was designed as a thruster for space vehicles, the characteristics of the plasma make it an excellent candidate for industrial applications. This project sought to characterize the system for use in materials processing and characterization. The surface modification on ZnCdTe, CdTe, and ZnTe will be presented. Phase 3 involved metal colloids and semiconductor quantum dots. One aspect of this project involves a collaborative effort with the Solid State Division of ORNL. The thrust behind this research is to develop ion implantation for synthesizing novel materials (quantum dots wires and wells, and metal colloids) for applications in all optical switching devices, up conversion, and the synthesis of novel refractory materials. The ions of interest are Au, Ag, Cd, Se, In, P, Sb, Ga, and As. The specific materials of interest are: CdSe, CdTe, InAs, GaAs, InP, GaP, InSb, GaSb, and InGaAs. A second aspect of this research program involves using porous glass (25-200 A) for fabricating materials of finite size. The results of some of this work will also be reported.

Collins, W. E.↗

Effect of task load and task load increment on performance and workload

The goal of adaptive automated task allocation is the 'seamless' transfer of work demand between human and machine. Clearly, at the present time, we are far from this objective. One of the barriers to achieving effortless human-machine symbiosis is an inadequate understanding of the way in which operators themselves seek to reallocate demand among their own personal 'resources.' The paper addresses this through an examination of workload response, which scales an individual's reaction to common levels of experienced external demand. The results indicate the primary driver of performance is the absolute level of task demand over the increment in that demand.

Hancock, P. A.↗

Using a microgravity environment to probe wave turbulence

The experimental key to observing stochasticity or turbulence in a distribution of interacting propagating waves is the achievement of high amplitude and the use of a medium with a large coefficient of nonlinearity. The research indicates that capillary waves are the best means of observing this phenomenon; however, gravitational modifications of the capillary wave dispersion law greatly reduce the large coefficient of nonlinearity. Thus, a search for wave turbulence in a large drop of fluid that is positioned in a microgravity experiment was conducted. Capillary waves that run around the surface of the drop are excited, and their power spectrum and higher order correlations are analyzed for wave turbulence. The theoretical calculations indicate that modulations of the power spectrum should propagate as second sound waves. These issues have consequences for signal processing and plasma confinement.

Putterman, S.↗

Dynamical reference frames in the planetary and earth-moon systems

Estimates of the accuracies of the ephemerides are reviewed using data for planetary and lunar systems to determine the efficacy of the inherent dynamical reference frame. The varied observational data are listed and given with special attention given to ephemeris improvements. The importance of ranging data is discussed with respect to the inner four planets and the moon, and the discrepancy of 1 arcsec/century between mean motions determined by optical observations versus ranging data is addressed. The Viking mission data provide inertial mean motions for the earth and Mars of 0.003 arcsec/century which will deteriorate to 0.01 arcsec after about 10 years. Uncertainties for other planets and the moon are found to correspond to approximately the same level of degradation. In general the data measurements and error estimates are improving the ephemerides, although refitting the data cannot account for changes in mean motion.

Standish, E. M.↗

Advances in large inflatable reflectors

For most applications in space for which they were tried, inflatable structures show a significant weight reduction when compared to mechanical structures. Inflatables are unmatched when compared to mechanical structures when packaged volume is considered. The reliability of deployment of inflatable structures was known for years. When properly designed, such a system is inherently more reliable because it has very few points of failure. Fully inflatable vs. rigidized inflatable structures are discussed. The L'Garde solar concentrator experience is described. Reflector surface and cylinder rigidization, improvement in gore design tools, and expected advances in rigidization schemes with near future are examined.

Thomas, M.↗

The relative fluorescent efficiency of sodium salicylate between 90 and 800 eV

The relative fluorescent quantum efficiency of sodium salicylate was measured between 90 and 800 eV (138 -15 A) by the use of synchrotron radiation. A general increase in efficiency was observed in this spectral range except for abrupt decreases in efficiency at the carbon and oxygen K-edges. Beyond the oxygen K-edge (532 eV) the efficiency increased linearly with the incident photon energy to the limit of the present observations.

Angel, G. C.↗

Spectroscopy of cataclysmic variables. I - Observations

Spectroscopic observations of 69 cataclysmic variables are presented. Representative spectra, accurate coordinates, and finding charts are given for each object. Line strengths, equivalent widths, and line widths for all emission lines in 153 spectra are tabulated. The spectra are discussed briefly, and notes to selected objects are given.

Williams, G.↗

Further photometric observations of 2A 0311-227

Simultaneous V, B, and U photometry is presented for the AM Herculis type system 2A 0311-227. A Fourier analysis has failed to detect the 6 minute quasi-periodic oscillation reported earlier. It has, however, revealed the presence of oscillations at 20.2 and 13.7 minutes. These are interpreted in terms of a nonsinusoidal light curve. U, B, and V light curves are given and discussed in terms of current models for AM Her systems. B-V and U-B color curves are also presented, as is the behavior of the system in the color-color plane.

Williams, G.↗

The amazing X-ray light curve of 2A 0311-227

The X-ray light curve of the AM Herculis-type binary 2A 0311-227 is presented. A smooth modulation of the X-ray flux at the orbital period is obtained, along with an eclipse feature that is total for 0.1-0.8 keV photons yet not visible for photons above about 3 keV. This strong and smooth dependence on energy suggests an origin in the obscuration of the X-ray emitting region by a column of accreting gas. Furthermore, very strong quasi-periodic pulsations with a period of about 6 min are found in the soft X-ray light curve. This periodicity is also present in the optical and hard X-ray light curves, and in the circular polarization data. It seems likely that the periodicity arises from a modulation of the mass accretion rate onto the white dwarf, and possible that it originates in pulsations of a disk-magnetosphere boundary.

Patterson, J.↗

Light curve of the optical counterpart of 2A0311-227

Visual and blue light curves are presented for the optical counterpart of the X-ray source 2A0311-227. This system, which is the newest member of the AM Herculis class of binaries, has an orbital period of 81 minutes which also modulates the visual light curve. A Fourier analysis of the data has revealed the presence of a 6-minute oscillation, at least in the visual light curve. Whether or not it is also present in the blue light curve is unclear.

Williams, G.↗

Solar weather/climate predictions

Solar variability influences upon terrestrial weather and climate are addressed. Both the positive and negative findings are included and specific predictions, areas of further study, and recommendations listed.

Schatten, K. H.↗

Optical counterpart of 2A0311-227

Spectrophotometric observations of the optical counterpart of the X-ray source 2A0311-227 are reported. A 1.3-m telescope associated with a photon-counting spectral scanner was used for observations in the range 4000 to 5800 A. Strong emission features are noted for H I, He II at 4686 A and the C III-N III blend at 4640-4650 A. Analyses of radial velocities show the star to be a spectroscopic binary with a period of 81.04 + or - 0.01 min, while blue and yellow light curves reveal variations in stellar color. Similarities between this binary and AM Herculis are noted and a model of a 1.2-solar mass white dwarf with a 0.2-solar mass companion at a separation of 0.7 solar radii is suggested.

Williams, G.↗

Applications of remote sensing to estuarine management

Projects for sewage outfall siting for pollution control in the lower Chesapeake Bay wetlands are reported. A dye-buoy/photogrammetry and remote sensing technique was employed to gather circulation data used in outfall siting. This technique is greatly favored over alternate methods because it is inexpensive, produces results quickly, and reveals Lagrangian current paths which are preferred in making siting decisions. Wetlands data were obtained by interpretation of color and color infrared photographic imagery from several altitudes. Historical sequences of photographs are shown that were used to document wetlands changes. Sequential infrared photography of inlet basins was employed to determine tidal prisms, which were input to mathematical models to be used by state agencies in pollution control. A direct and crucial link between remote sensing and management decisions was demonstrated in the various projects.

Munday, J. C., Jr.↗