Search NASA⌕ Search

Engineering topics

Williamson, Mark

Publications and source records attributed to Williamson, Mark.

Study of Am electrodeposition from AmCl 3 -LiCl-KCl Molten Salt

In this work, the electrodeposition reaction of Am in AmCl 3 -LiCl-KCl molten salt was studied using voltammetry and chronoamperometry. Electrodeposition of Am was shown to proceed via a two – step reaction scheme, involving the one-electron transfer reduction of Am 3+ to Am 2+ , followed by the two-electron transfer reduction of intermediate Am 2+ to Am 0 . A low Coulombic efficiency of Am deposition was measured despite the Am deposition occurring within the thermodynamic stability window of the supporting LiCl-KCl electrolyte. We hypothesize that the low efficiency is due to out-diffusion of the intermediate Am 2+ species away from the electrode surface. Experimental observations provide evidence of a kinetically – limited electrodeposition reaction, which allows for the loss of intermediate Am 2+ via diffusion leading to Am deposition inefficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AL4GAP: Active learning workflow for generating DFT-SCAN accurate machine-learning potentials for combinatorial molten salt mixtures

Machine learning interatomic potentials have emerged as a powerful tool for bypassing the spatiotemporal limitations of ab initio simulations, but major challenges remain in their efficient parameterization. We present AL4GAP, an ensemble active learning software workflow for generating multicomposition Gaussian approximation potentials (GAP) for arbitrary molten salt mixtures. The workflow capabilities include: (1) setting up user-defined combinatorial chemical spaces of charge neutral mixtures of arbitrary molten mixtures spanning 11 cations (Li, Na, K, Rb, Cs, Mg, Ca, Sr, Ba and two heavy species, Nd, and Th) and 4 anions (F, Cl, Br, and I), (2) configurational sampling using low-cost empirical parameterizations, (3) active learning for down-selecting configurational samples for single point density functional theory calculations at the level of Strongly Constrained and Appropriately Normed (SCAN) exchange-correlation functional, and (4) Bayesian optimization for hyperparameter tuning of two-body and many-body GAP models. Here, we apply the AL4GAP workflow to showcase high throughput generation of five independent GAP models for multicomposition binary-mixture melts, each of increasing complexity with respect to charge valency and electronic structure, namely: LiCl–KCl, NaCl–CaCl 2 , KCl–NdCl 3 , CaCl 2 –NdCl 3 , and KCl–ThCl 4 . Our results indicate that GAP models can accurately predict structure for diverse molten salt mixture with density functional theory (DFT)-SCAN accuracy, capturing the intermediate range ordering characteristic of the multivalent cationic melts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of americium trichloride via chlorination of americium oxide using zirconium tetrachloride in LiCl-KCl molten salt

To better inform electrorefining operations of used nuclear fuel, a fundamental understanding of the electrochemical properties of each actinide in the molten salt electrolyte is needed. Access to actinide chlorides is thus required to support measurement of these properties. In this work, we synthesized americium trichloride through a novel pathway comprising chlorination of Am2O3 with ZrCl4 in a LiCl-KCl molten salt at 500 degrees C. The formation of AmCl3 was confirmed by cyclic voltammetry and gamma spectroscopy. This chlorination method does not produce mixed hazardous-radioactive waste and the byproduct, ZrO2, is not electrochemically active and does not affect the actinide electrodeposition reaction.

actinide chloride synthesis↗

Composition-transferable machine learning potential for LiCl-KCl molten salts validated by high-energy x-ray diffraction

Unraveling the liquid structure of multicomponent molten salts is challenging due to the difficulty in conducting and interpreting high-temperature diffraction experiments. Here, motivated by this challenge, we developed composition-transferable Gaussian approximation potential (GAP) for molten LiCl-KCl. A DFT-SCAN accurate GAP is active-learned from only ~1100 training configurations drawn from 10 unique mixture compositions enriched with metadynamics. The GAP-computed structures show strong agreement across high-energy x-ray diffraction experiments, including for a eutectic not explicitly included in model training, thereby opening the possibility of composition discovery.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Future of Nuclear Energy: Electrochemical Reprocessing of Fuel Takes Center Stage

Nuclear power plants use energy-dense fuel and provide dependable baseload energy without generating greenhouse gas emissions. Despite these advantages, the long-term management of used nuclear fuel (UNF) remains a key challenge due to its lifetime (hundreds of thousands of years) and radiotoxicity. The components of UNF that contribute the most to this challenge are the actinide elements. A potential solution to this issue is to separate these radioisotopes from the bulk of the UNF and recycle them as fuel in advanced nuclear reactors. These separations can be achieved using electrochemical reprocessing, which employs electrochemical conversion and electrodeposition in a high-temperature molten salt electrolyte medium to separate the actinides from UNF. In this work, we review the current status, fundamental challenges, and future prospects of electrochemical reprocessing as they relate to UNF recycling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Automated Development of Molten Salt Machine Learning Potentials: Application to LiCl

The in silico modeling of molten salts is critical for emerging "carbon-free" energy applications but is inhibited by the cost of quantum mechanically treating the high polarizabilities of molten salts. Here, we integrate configurational sampling using classical force fields with active learning to automate and accelerate the generation of Gaussian approximation potentials (GAP) for molten salts. This methodology reduces the number of expensive ab initio evaluations required for training set generation to O(100), enabling the facile parametrization of a molten LiCl GAP model that exhibits a 19 000-fold speedup relative to AIMD. The developed molten LiCl GAP model is applied to sample extended spatiotemporal scales, permitting new physical insights into molten LiCl's coordination structure as well as experimentally validated predictions of structures, densities, self-diffusion constants, and ionic conductivities. The developed methodology significantly lowers the barrier to the in silico understanding and design of molten salts across the periodic table.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multielectrode Array Sensors to Enable Long-Duration Corrosion Monitoring and Control of Concentrating Solar Power Systems

Molten mixtures of MgCl2-KCl-NaCl are promising heat transfer fluid (HTF) candidates for the next generation of concentrating solar power systems (Gen3 CSP), because of their low cost, high decomposition temperature, and favorable heat transfer characteristics. However, if the chemistry of the salts is not properly controlled, molten chlorides can cause corrosion of high-temperature metal alloys, such as Inconel (R), in CSP systems. Here we demonstrate a corrosion monitoring system that can be used to monitor the health of the structural alloys over long durations. The monitoring system includes a multielectrode array voltammetry sensor that measures the redox potential of molten MgCl2-KCl-NaCl mixture as well as the presence of corrosion products and impurities. The sensors have been successfully operated in static molten salt environments for long durations, and are capable of detecting corrosion products, such as Cr2+ and Fe2+, quantitatively at low concentrations (i.e., approximately 100 ppm) with less than 4% error.

Concentrated solar power↗

Multi-Physics Simulations for Molten Salt Reactor Evaluation: Chemistry Modeling and Database Development

To aid in design and licensing of molten salt reactors, a framework integrating the complex interaction of reactor neutronics, thermal hydraulics, and chemistry is being developed within the Department of Energy Advanced Reactor Technology Program’s Molten Salt Reactor (MSR) campaign. The challenges of integrating thermochemical and thermophysical behavior into a multi-physics reactor simulations include the following: (1) population of data needed for refinement of current models and development of nonexistent models through experimental measurements, first principles calculations, and development of a machine learning approach (2) thermochemical and thermophysical model development, (3) further development of Thermochimica, an open-source efficient equilibrium solver used to link thermochemical models to the multi-physics code, (4) a framework for integrating kinetic phenomena: nucleation, precipitation, mass/heat transport, and corrosion models, and (5) a computational environment to efficiently utilize the data and models within a multi-physics modeling tool. These challenges are being addressed through a collaboration among Oak Ridge National Laboratory, Argonne National Laboratory, the University of South Carolina, and the University of Ontario Institute of Technology.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Bus bar electrical feedthrough for electrorefiner system

A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.

42 ENGINEERING↗

Argonne explains nuclear recycling in 4 minutes

Currently, when using nuclear energy only about five percent of the uranium used in a fuel rod gets fissioned for energy; after that, the rods are taken out of the reactor and put into permanent storage. There is a way, however, to use almost all of the uranium in a fuel rod. Recycling used nuclear fuel could produce hundreds of years of energy from just the uranium we've already mined, all of it carbon-free. Problems with older technology put a halt to recycling used nuclear fuel in the United States, but new techniques developed by scientists at Argonne National Laboratory address many of those issues. For more information, visit http://www.anl.gov/energy/nuclear-energy.

25 ENERGY STORAGE↗

Developing a Regional Recovery Framework

Abstract A biological attack would present an unprecedented challenge for local, state, and federal agencies; the military; the private sector; and individuals on many fronts ranging from vaccination and treatment to prioritization of cleanup actions to waste disposal. To prepare the Seattle region to recover from a biological attack, the Seattle Urban Area Security Initiative (UASI) partners collaborated with military and federal agencies to develop a Regional Recovery Framework for a Biological Attack in the Seattle Urban Area. The goal was to reduce the time and resources required to recover and restore wide urban areas, military installations, and other critical infrastructure following a biological incident by providing a coordinated systems approach. Based on discussions in small workshops, tabletop exercises, and interviews with emergency response agency staff, the partners identified concepts of operation for various areas to address critical issues the region will face as recovery progresses. Key to this recovery is the recovery of the economy. Although the Framework is specific to a catastrophic, wide-area biological attack using anthrax, it was designed to be flexible and scalable so it could also serve as the recovery framework for an all-hazards approach. The Framework also served to coalesce policy questions that must be addressed for long-term recovery. These questions cover such areas as safety and health, security, financial management, waste management, legal issues, and economic development.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗