Search NASA⌕ Search

Engineering topics

Wilson, R. G.

Publications and source records attributed to Wilson, R. G..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

1.54 micron Emission from Erbium implanted GaN for Photonic Applications

The development of efficient and compact light sources operating at 1.54 micron is of enormous importance for the advancement of new optical communication systems. Erbium (1%) doped fiber amplifiers (EDFA's) or semiconductor lasers are currently being employed as near infrared light sources. Both devices, however, have inherent limitations due to their mode of operation. EDFA's employ an elaborate optical pumping scheme, whereas diode lasers have a strongly temperature dependent lasing wavelength. Novel light emitters based on erbium doped III-V semiconductors could overcome these limitations. Er doped semiconductors combine the convenience of electrical excitation with the excellent luminescence properties of Er(3+) ions. Electrically pumped, compact, and temperature stable optoelectronic devices are envisioned from this new class of luminescent materials. In this paper we discuss the potential of Er doped GaN for optoelectronic applications based on temperature dependent photoluminescence excitation studies.

Thaik, Myo↗
NASA NTRS1990

Temperature automation for a propellant mixer

The analysis and installation of an automatic temperature controller on a propellant mixer is presented. Ultimately, the entire mixing process will come under automation, but since precise adherence to the temperature profile is very difficult to sustain manually, this was the first component to be automated. Automation is not only important for producing a uniform product, but it is necessary for envisioned space-based propellant production.

Vincent, T. L.↗
NASA NTRS1986

Radiometric responsivity determination for Feature Identification and Location Experiment (FILE) flown on space shuttle mission

A procedure was developed to obtain the radiometric (radiance) responsivity of the Feature Identification and Local Experiment (FILE) instrument in preparation for its flight on Space Shuttle Mission 41-G (November 1984). This instrument was designed to obtain Earth feature radiance data in spectral bands centered at 0.65 and 0.85 microns, along with corroborative color and color-infrared photographs, and to collect data to evaluate a technique for in-orbit autonomous classification of the Earth's primary features. The calibration process incorporated both solar radiance measurements and radiative transfer model predictions in estimating expected radiance inputs to the FILE on the Shuttle. The measured data are compared with the model predictions, and the differences observed are discussed. Application of the calibration procedure to the FILE over an 18-month period indicated a constant responsivity characteristic. This report documents the calibration procedure and the associated radiometric measurements and predictions that were part of the instrument preparation for flight.

Wilson, R. G.↗
NASA NTRS1983

Autonomous earth feature classification - Shuttle and aircraft flight test results

The Feature Identification and Location Experiment (FILE) flown on the Shuttle STS-2 mission November 12-14, 1981, tested a technique for autonomous real-time classification of selected earth features, i.e., water; bare land; vegetation; and clouds, snow, and ice. A second instrument, designed for aircraft flights, flew over regions of the west and east coasts of the United States and across the country. In each instrument, two bore-sighted CCD cameras image earth scenes in two spectral bands. Each camera includes a 100-element by 100-element detector array, and classification circuits. A simple algorithm and logic circuit provides classification decisions within a few microseconds. The experiment records the number of picture elements (pixels) representing each feature and the reflected solar radiation for each band. After flight, pixel-by-pixel classification images are constructed and compared with 70-mm color photographs taken simultaneously with the CCD-camera data.

Sivertson, W. E., Jr.↗
NASA NTRS1982

Feature Identification and Location Experiment

The Feature Identification and Location Experiment (FILE), which was flown on the second Space Shuttle flight to test a technique for real-time, autonomous classification of water, vegetation and bare land as well as clouds, snow and ice, senses earth radiation in spectral bands centered at 0.65 and 0.85 microns. The radiance ratio classification algorithm has successfully made automatic data selection decisions. A classification image obtained on the mission is providing data needed to evaluate the FILE algorithm and overall system performance.

Sivertson, W. E., Jr.↗
NASA NTRS1979

Spatial-frequency response of the limb infrared monitor of the stratosphere

Measurements from the Limb Infrared Monitor of the stratosphere (LIMS) are presented and discussed. From the LIMS design model data, the modulation transfer function (MTF) was calculated for the optical system, the detector field mask, the electronics, and the overall system for each channel. The signal output performance of the instrument was predicted from the system MTF data and model input radiance data for each channel. The MTF measurements made on the flight sensor confirmed the analytical results.

Wilson, R. G.↗
NASA NTRS1979

Adaptive remote sensing technology for feature recognition and tracking

A technology development plan designed to reduce the data load and data-management problems associated with global study and monitoring missions is described with a heavy emphasis placed on developing mission capabilities to eliminate the collection of unnecessary data. Improved data selectivity can be achieved through sensor automation correlated with the real-time needs of data users. The first phase of the plan includes the Feature Identification and Location Experiment (FILE) which is scheduled for the 1980 Shuttle flight. The FILE experiment is described with attention given to technology needs, development plan, feature recognition and classification, and cloud-snow detection/discrimination. Pointing, tracking and navigation received particular consideration, and it is concluded that this technology plan is viewed as an alternative to approaches to real-time acquisition that are based on extensive onboard format and inventory processing and reliance upon global-satellite-system navigation data.

Wilson, R. G.↗
NASA NTRS1979

Spatial-frequency response of the Limb Infrared Monitor of the Stratosphere /LIMS/ radiometer

The Limb Infrared Monitor of the Stratosphere (LIMS), an experiment on the Nimbus-7 satellite, is designed to scan the earth's limb vertically and measure spectral emission profiles of trace atmospheric gases believed to be important in processes controlling the stratospheric ozone distribution. Experiment objectives are reviewed and several analyses and measurements are described which were performed to determine the adequacy of the system for satisfying these objectives. Adequate spatial-frequency response for all the spectral channels is required to provide, through inversion of the measured limb-radiance profiles, important information about the temperature, structure, and composition of the atmosphere. From the LIMS design-model data, the MTF was calculated for the optical system, the detector field mask, the electronics, and the overall system, for each channel. The signal output performance of the instrument was predicted from the system MTF data model input radiance data for each channel. MTF measurements made on the flight sensor confirmed the analytical results. The predictions indicate that the instrument can satisfy the basic measurement objectives of the experiment.

Wilson, R. G.↗
NASA NTRS1979

Spectral feature classification and spatial pattern recognition

This paper introduces a spatial pattern recognition processing concept involving the use of spectral feature classification technology and coherent optical correlation. The concept defines a hybrid image processing system incorporating both digital and optical technology. The hybrid instrument provides simplified pseudopattern images as functions of pixel classification from information embedded within a real-scene image. These pseudoimages become simplified inputs to an optical correlator for use in a subsequent pattern identification decision useful in executing landmark pointing, tracking, or navigating functions. Real-time classification is proposed as a research tool for exploring ways to enhance input signal-to-noise ratio as an aid in improving optical correlation. The approach can be explored with developing technology, including a current NASA Langley Research Center technology plan that involves a series of related Shuttle-borne experiments. A first-planned experiment, Feature Identification and Location Experiment (FILE), is undergoing final ground testing, and is scheduled for flight on the NASA Shuttle (STS2/flight OSTA-1) in 1980. FILE will evaluate a technique for autonomously classifying earth features into the four categories: bare land; water; vegetation; and clouds, snow, or ice.

Sivertson, W. E., Jr.↗
NASA NTRS1979

A unique approach to the development of adaptive sensor systems for future spacecraft

In the Shuttle era, it should be possible to develop adaptive remote sensor systems serving more directly specific researcher and user needs and at the same time alleviating the data management problem via intelligent sensor capabilities. The present paper provides a summary of such an approach, wherein specific capabilities have been developed for future global monitoring applications. A detailed description of FILE-I (Feature Identification and Location Experiment) is included along with a summary of future experiments currently under development.

Schappell, R. T.↗
NASA NTRS1979

Earth feature identification and tracking technology development

The paper discusses needs for smart sensing in terrestrial and atmospheric remote sensing as related to current technology and a scheduled Shuttle experiment. An approach is outlined involving Shuttle-borne experiments to develop earth feature identification and tracking technology including a Feature Identification and Location Experiment (FILE) scheduled for flight on the NASA Shuttle with an objective of classifying earth features into categories of bare land, water, vegetation, and clouds, snow, and ice. The plan for evolution of the FILE-related technology leads to capabilities for pointing instruments to predetermined sites, reacquiring earth features or landmarks, and tracking features such as coastlines and rivers. Technology concepts relative to an overall system transfer function is discussed, and the development status outlined.

Wilson, R. G.↗
NASA NTRS1975

Wavefront-error evaluation by mathematical analysis of experimental Foucault-test data

The diffraction theory of the Foucault test provides an integral formula expressing the complex amplitude and irradiance distribution in the Foucault pattern of a test mirror (lens) as a function of wavefront error. Recent literature presents methods of inverting this formula to express wavefront error in terms of irradiance in the Foucault pattern. The present paper describes a study in which the inversion formulation was applied to photometric Foucault-test measurements on a nearly diffraction-limited mirror to determine wavefront errors for direct comparison with ones determined from scatter-plate interferometer measurements. The results affirm the practicability of the Foucault test for quantitative wavefront analysis of very small errors, and they reveal the fallacy of the prevalent belief that the test is limited to qualitative use only. Implications of the results with regard to optical testing and the potential use of the Foucault test for wavefront analysis in orbital space telescopes are discussed.

Wilson, R. G.↗
NASA NTRS1975

Landmark tracking technology

This paper summarizes the justification and technical approach of an experimental plan for landmark recognition and tracking from the Advanced Technology Laboratory (ATL). The primary experimental approach is that of near real-time pattern recognition by means of coherent optical techniques. An experiment development plan would lead to a flight test in 1981.

Welch, J. D.↗
NASA NTRS1973

Introduction to the Space Transportation System

A new space transportation concept which is consistent with the need for more cost effective space operations has been developed. The major element of the Space Transportation System (STS) is the Space Shuttle. The rest of the system consists of a propulsive stage which can be carried within the space shuttle to obtain higher energy orbits. The final form of this propulsion stage will be called the Space Tug. A third important element, which is not actually a part of the STS since it has no propulsive capacity, is the Space Laboratory. The major element of the Space Shuttle is an aircraft-like orbiter which contains the crew, the cargo, and the liquid rocket engines in the rear.

Wilson, R. G.↗
NASA NTRS1972

Mg and Be ion implanted GaAs.

Description of methods for generating desired Be and Mg ions and producing the electrical properties of p-type layers by implanting these ions in GaAs substrates. It is shown that the p-type layers thus produced have large hole concentrations and mobilities.

Hunsperger, R. G.↗
NASA NTRS1971

Surface ionization hysteresis phenomena

Temperature field influence on hysteresis in Cs surface ionization on metal surfaces, observing adsorption phase fine structure and ion current density increase

Wilson, R. G.↗