Search NASA⌕ Search

Engineering topics

Winsa, Edward A.

Publications and source records attributed to Winsa, Edward A..

Concept Defined for the International Space Station's Fluids and Combustion Facility

The Fluids and Combustion Facility (FCF) will occupy three powered racks and one stowage rack on the International Space Station (ISS). It will be a permanent modular, multiuser facility to accommodate microgravity science experiments onboard the ISS s U.S. Laboratory Module. FCF will support NASA Human Exploration and Development of Space program objectives requiring sustained, systematic research in the disciplines of fluid physics and combustion science. The two disciplines share racks and mutually necessary hardware within FCF to dramatically reduce costs and effectively use ISS resources. Even with the cost of FCF development included, experimentation using FCF on the space station will cost only half of what it did on the space shuttles.

Winsa, Edward A.↗

Fluids and Combustion Facility: Fluids Integrated Rack

The Fluids Integrated Rack (FIR) is a modular, multi-user facility to accommodate a wide variety of microgravity fluid physics science experiments on-board the US Laboratory Module of the International Space Station (ISS). The FIR is one of three racks comprising the Fluids and Combustion Facility (FCF). The FCF is being designed to increase the amount and quality of scientific data and decrease the development cost of an individual experiment relative to the era of Space Shuttle experiments. The unique, long-term, microgravity environment and long operational times on the ISS will offer experimenters the opportunity to modify experiment parameters based on their findings similar to what can be accomplished in ground laboratories. The FIR concept has evolved over time to provide a flexible, 'optics bench' approach to meet the wide variety of anticipated research needs. The FIR's system architecture presented is designed to meet the needs of the fluid physics community while operating within the constraints of the available ISS resources.

Corban, Robert R.↗

Facilitating Science--The International Space Station Fluids and Combustion Facility

Scientists in many fields would like to perform experiments on the International Space Station (ISS) to take advantage of the unique environment of microgravity (which is the near-absence of gravity). The ISS will provide the opportunity for scientists to perform microgravity tests over much longer time periods than previously available on the space shuttle--months rather than hours or days--providing more data that could lead to new discoveries. Many of the experiments on ISS will be conducted through the use of new microgravity science facilities. A microgravity science facility is a complete system of on-orbit and ground (on-Earth) hardware, software, operations, and plans that have been optimized to perform sustained microgravity research in one or two scientific disciplines. The facility concept includes hardware that remains on-orbit (because of its general usefulness) and a small amount of unique hardware that is developed for each principal investigator. Such unique hardware customizes the facility to perform a given principal investigator's experiment effectively. Many facilities are planned for the ISS to accommodate scientists' needs. While the quality and quantity of scientific data are being improved, per-experiment costs will be lowered relative to other ways of performing such experiments. The NASA Lewis Research Center is developing a Fluids and Combustion Facility (FCF) to perform microgravity fluids and combustion experiments on the ISS. The FCF will be the lowest cost, most resource efficient approach to performing fluid physics and combustion science experiments on the ISS. Experiments performed in the FCF will be 3 to 9 times less expensive than similar Spacelab experiments. Moreover, use of key ISS resources, such as upmass, power, cooling, and astronaut crew time, will be cut by the same factor.

Winsa, Edward A.↗

Flight software development for the isothermal dendritic growth experiment

The Isothermal Dendritic Growth Experiment (IDGE) is a microgravity materials science experiment scheduled to fly in the cargo bay of the shuttle on the United States Microgravity Payload (USMP) carrier. The experiment will be operated by real-time control software which will not only monitor and control onboard experiment hardware, but will also communicate, via downlink data and unlink commands, with the Payload Operations Control Center (POCC) at NASA George C. Marshall Space Flight Center (MSFC). The software development approach being used to implement this system began with software functional requirements specification. This was accomplished using the Yourdon/DeMarco methodology as supplemented by the Ward/Mellor real-time extensions. The requirements specification in combination with software prototyping was then used to generate a detailed design consisting of structure charts, module prologues, and Program Design Language (PDL) specifications. This detailed design will next be used to code the software, followed finally by testing against the functional requirements. The result will be a modular real-time control software system with traceability through every phase of the development process.

Levinson, Laurie H.↗

Flight software development for the isothermal dendritic growth experiment

The Isothermal Dendritic Growth Experiment (IDGE) is a microgravity materials science experiment scheduled to fly in the cargo bay of the shuttle on the United States Microgravity Payload (USMP) carrier. The experiment will be operated by real-time control software which will not only monitor and control onboard experiment hardware, but will also communicate, via downlink data and uplink commands, with the Payload Operations Control Center (POCC) at NASA George C. Marshall Space Flight Center (MSFC). The software development approach being used to implement this system began with software functional requirements specification. This was accomplished using the Yourdon/DeMarco methodology as supplemented by the Ward/Mellor real-time extensions. The requirements specification in combination with software prototyping was then used to generate a detailed design consisting of structure charts, module prologues, and Program Design Language (PDL) specifications. This detailed design will next be used to code the software, followed finally by testing against the functional requirements. The result will be a modular real-time control software system with traceability through every phase of the development process.

Levinson, Laurie H.↗

The alloy undercooling experiment on the Columbia STA 61-C space shuttle mission

An Alloy Undercooling experiment was performed in an electromagnetic levitator during the Columbia STS 61-C mission in January 1986. One eutectic nickel-tin alloy specimen was partially processed before an equipment failure terminated the experiment. Examination of the specimen showed evidence of undercooling and some unusual microstructural features.

Harf, Fredric H.↗

The alloy undercooling experiment on the Columbia STS 61-C Space Shuttle mission

An Alloy Undercooling experiment was performed in an electromagnetic levitator during the Columbia STS 61-C mission in January 1986. One eutectic nickel-tin alloy specimen was partially processed before an equipment failure terminated the experiment. Examination of the specimen showed evidence of undercooling and some unusual microstructural features.

Harf, Fredric H.↗