Engineering topics
Wiser, Ralph
Publications and source records attributed to Wiser, Ralph.
Validation of URANS and STRUCT-ε turbulence models for stratified sodium flow
Simulations of a transient stratified sodium experiment are carried out using a classic unsteady RANS model and the second-generation URANS model, STRUCT-ε. Turbulence modeling challenges and their implications to stratified flow prediction are discussed in the context of other sources of error. Input errors are discussed and addressed; discretization error is calculated to be less than 5% of the inlet velocity, for 80% of the domain; and remaining errors in temperature distributions are attributed to the turbulence model. Qualitative flow features from the simulations are presented and discussed. Compared to the experiment, the STRUCT-ε turbulence model provides a more physically accurate prediction of temperature and momentum mixing in key regions of the domain. Quantitative measures such as the L 2 norm of the temperature discrepancy demonstrate the improved performance of the STRUCT-ε approach. In conclusion, the magnitude of the temperature fluctuations is very well-predicted by the STRUCT-ε, while URANS overpredicts them by approximately 50%.
Challenge Problem 1: Preliminary Model Development and Assessment of Flexible Heat Transfer Modeling Approaches
This report presents the modeling progress of a university consortium studying flexible modeling for turbulent heat transfer. In the context of advanced nuclear reactor design, where challenges include non-unity Prandtl fluids, free and mixed convection, and transitional flow, computational fluid dynamics methods are underutilized due to low confidence in modeling approaches and high computational cost. This report evaluates the performance of engineering CFD models in diabatic, buoyant turbulent flow. It finds that all turbulence models including several variants of the k-ε and k-ω models struggle to predict accurate turbulent momentum and heat transfer in such flows. The Nusselt numbers have been compared between the models and the DNS data, where calculations have been performed for each case and trends have shown a good agreement between DNS estimated Nusselt numbers and available correlations as well as experimental data. A novel DNS correlation for high Pr cases as they are transitioning from mixed convection to natural convection has been proposed. While Nusselt number errors relative to DNS range from 20% to 50%, the models capture similar trends to DNS with respect to Nusselt suppression and amplification under varying levels of buoyancy effect. This report also highlights model form error as a significant contributor to CFD predictions and proposes a framework for quantifying model error and improving confidence in CFD calculations. To improve the predictive capability of engineering CFD models, data-driven approaches for turbulence models are investigated. Theoretical frameworks based on the invariant tensor / vector basis neural networks for prediction of Reynolds stresses and turbulent heat fluxes are employed. The models are developed using direct numerical simulations data for forced convection flows of different fluids in vertical planar channel domain. The framework is implemented in spectral element solvers Nek5000 / nekRS and has shown a potential for future development and consideration of mixed convection flows.
Challenge Problem 1: Benchmark Specifications for the Direct Numerical Simulation of Canonical Flows
In this report detailed specifications for the canonical problems to study the heat transfer in different coolants, geometries and conditions are presented. The scope has been chosen with industry input and will address the outstanding challenges in predictive capabilities of coolant flows in advanced reactor-relevant conditions.
Thermal-striping analysis methodology for sodium-cooled reactor design
Computational fluid dynamics simulations have been performed to study the applicability of engineering CFD methods for thermals striping analysis. Thermal striping is the fluctuating temperature profile in a solid caused by fluctuating fluid temperature, and the resulting fluctuating thermal stresses cause high cycle fatigue and eventual material failure. Here this study presents the methodology for thermal striping analysis that including a transient conjugate heat transfer RANS model and benchmark the results against a sodium triple jet experiment. The multiphysics calculations are implemented to analyze the thermal stresses in the solid domain caused by the coupled heat transfer between the fluid and solid domains. Validation data from a liquid sodium triple jet experiment include time-averaged temperature measurements and power spectra of the temperature signal. The numerical results agree well with these experimental measures, demonstrating key features such as the dominant frequency of temperature fluctuations. The applicability of a low-cost wall treatment method is demonstrated, enabling key computational savings. Finally, the performance of two finite element stress analysis software packages is compared, and the validity of the lower-cost method is confirmed. These results demonstrate the applicability of engineering methods for computational thermal striping calculations, enabling thermal striping estimations in large fluid systems such as the core of a Sodium-cooled nuclear reactor.