Search NASA⌕ Search

Engineering topics

Wissinger, A. B.

Publications and source records attributed to Wissinger, A. B..

Lag Angle Compensation in a Space Borne Scanning Lidar

The so-called 'lag angle' is inherent in any spaceborne scanning lidar system. It is also important in systems where the scanning causes a significant pointing error during the laser interrogating pulse echo time. In a heterodyne lidar system, the lag angle, if uncompensated, will significantly reduce the signal-to-noise ratio. An investigation of lag angle is presented.

Wissinger, A. B.↗

Optical performance of synthetic aperture telescope configurations

The diffraction-limited performances of synthetic aperture configuration arrays of four telescopes, used for coherent imaging or beam transmission, are calculated and compared. The optical performance of phased telescope arrays was found to be more sensitive to rms piston errors than to rms tilt errors. Image degradation due to pupil mapping errors imposes tight tolerances upon the structural integrity of the telescope. One part in 10,000 pupil mapping error limits the field-of-view to approximately 30 arcsec. Field curvature of the independent telescopes provides a fundamental limit to the field-of-view for phased arrays made up of two-mirror telescopes. These field-of-view limitations may profoundly affect target acquisition, tracking, or imaging applications.

Harvey, J. E.↗

Design constraints of the LST fine guidance sensor

The LST Fine Guidance Sensor design is shaped by the rate of occurrence of suitable guide stars, the competition for telescope focal plane space with the Science Instruments, and the sensitivity of candidate image motion sensors. The relationship between these parameters is presented, and sensitivity to faint stars is shown to be of prime importance. An interferometric technique of image motion sensing is shown to have improved sensitivity and, therefore, a reduced focal plane area requirement in comparison with other candidate techniques (image-splitting prism and image dissector tube techniques). Another design requirement is speed in acquiring the guide star in order to maximize the time available for science observations. The design constraints are shown parametrically, and modelling results are presented.

Wissinger, A. B.↗